Expert Review Video:
Tube Step Specs:
Features:
Custom-fit, round nerf bars have wide, non-slip step pads that help you easily enter and exit your vehicle. Constructed of carbon steel with a black powder coat finish to resist chipping, peeling, and fading. Custom installation with mounting kit.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
Custom-fit, round nerf bars have wide, non-slip step pads that help you easily enter and exit your vehicle. Constructed of stainless steel with a polished finish that resists chipping, peeling, and fading. Custom installation with mounting kit.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
These 6" wide, brite anodized aluminum running boards sit close to your vehicle's frame for a streamlined look. The 1-piece, non-slip step pad on each board is made of soft, durable rubber, providing better grip than a molded step surface.
Installation Notes:
Drilling required for installation
More Information >Tube Step Specs:
Features:
The curved ends on these step bars give your vehicle a streamlined look. Made of rust-resistant powder coated steel, these 3" diameter round bars have recessed step areas that prevent internal corrosion. Non-slip step pads provide sure footing.
Installation Notes:
No drilling required for installation
Tech Tip:
Nerf Bars will not fit 2500 Series with 4WD.
More Information >Tube Step Specs:
Features:
These 6" wide, black aluminum running boards sit close to your vehicle's frame for a streamlined look. The 1-piece, non-slip step pad on each board is made of soft, durable rubber, providing better grip than a molded step surface.
Installation Notes:
Drilling required for installation
More Information >Tube Step Specs:
Features:
The aluminum bases of these step boards are covered in molded polymer for sure footing. Integrated light assemblies turn on when doors are open. Boards sit close to your vehicle's frame for a streamlined look. Custom mounting kit included.
Installation Notes:
Drilling required for installation
A Gap Strip (# 27-9901) is recommended for this application
More Information >Tube Step Specs:
Features:
These 6" wide, brushed aluminum running boards sit close to your vehicle's frame for a streamlined look. The 1-piece, non-slip step pad on each board is made of soft, durable rubber, providing better grip than a molded step surface.
Installation Notes:
Drilling required for installation
More Information >Tube Step Specs:
Features:
The aluminum bases of these step boards are covered in black molded polymer for sure footing. Each board sits close to your vehicle's frame for a streamlined look. Custom mounting kit included.
Installation Notes:
Drilling required for installation
A Gap Strip (# 27-9901) is recommended for this application
More Information >Videos
for Nerf Bars - Running Boards
Help Articles
for Nerf Bars - Running Boards
Expert Answers
for Nerf Bars - Running Boards
Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...The OEM prep package consists of 4…
view full answer...Hi Rene; I'm sure…
view full answer...Yes it is possible to put a platform rack on your 2024 Toyota RAV4 with the panoramic roof, and the Yakima LockNLoad is a great choice. Fitment will just depend on what kind of rails are on the roof of your car. For factory flush mounted rails you…
view full answer...Thank you for the photo of your 2019 Ram 1500 Classic! The quad cab has smaller doors for the rear while the crew cab has full-sized doors for the rear so I agree that you have the crew cab model which means the Aries Round Nerf Bars -…
view full answer...Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR.…
view full answer...Hi Darrell; there is a pair of Aries ActionTrac that fit your 2019 Silverado 2500 but the #AA3025165 are too short. What you need for your truck is the #AA3047902. This comes with…
view full answer...Hey Ralph! If your 2004 Chevy Silverado HD Extended cab is a 2500 model then I have a set that attaches to the body mounts that are welded to your frame. It is the Westin E-Series Round Nerf Bars item #23-1685. I have attached the instructions…
view full answer...Hey Michael, thanks for reaching out! The EcoHitch #EH57FR sits a little higher than the Curt #C52NR so it will give you better ground clearance for your 2024 Chevy Silverado 2500. The EcoHitch is a bit more recessed into the front bumper than the…
view full answer...For your 2010 Chevy Colorado the tube step fits we have depend on the cab style you have. You said you have 4 doors which would normally indicate you have a crew cab which is what the #23-3155 is designed to fit. If instead you actually have an…
view full answer...Hello Ronald, No, the SLT and AT4 are different submodels of the 2023 GMC Acadia. I can verify for you that there are running board fits for your 2023 GMC Acadia AT4, though, from Aries. I checked with the manufacturer to confirm this for you, and…
view full answer...Filter Products (8)
Contact and Help
What our customers are saying:
WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!
Eric
Cedar Springs, MI