2004 Dodge Ram Pickup Nerf Bars - Running Boards

Features:

The curved ends on these affordably priced step bars give your vehicle a streamlined look. The non-slip step pads in these polished stainless steel, 3" diameter bars sit in recessed areas instead of cutouts to inhibit internal corrosion.

Installation Notes:

No drilling required for installation

Tube steps are installed by attaching mounting brackets with the existing body mount bolts

Excludes Daytona, Rumble Bee and SRT-10 models

Features:

The curved ends on these affordably priced step bars give your vehicle a streamlined look. The non-slip step pads in these powder coated steel, 3" diameter bars sit in recessed areas instead of cutouts to inhibit internal corrosion.

Installation Notes:

No drilling required for installation

Tube steps are installed by attaching mounting brackets with the existing body mount bolts

Excludes Daytona, Rumble Bee and SRT-10 models

Features:

Grated steel running boards have an extra-wide stepping surface with raised treads to prevent slipping when entering your truck. Serrated treads provide a rugged look and help keep mud and snow from getting in your cab. Custom mounting kit included.

Installation Notes:

Drilling required for installation

Excludes Daytona, Rumble Bee and SRT-10 models

Features:

The curved ends on these black powder coated step bars give your vehicle a streamlined look. Footpad areas are recessed, rather than cut out, preserving the strength of the steel and providing a solid, rustproof step into your truck.

Installation Notes:

No drilling required for installation

Excludes Daytona, Rumble Bee and SRT-10 models

Features:

Straight-style, extra-wide step bars give your vehicle a rugged look. Polished stainless steel, oval tubes have molded plastic endcaps to keep out moisture. Oversize, 5" wide step pads provide sure footing. Custom mounting kit included.

Installation Notes:

No drilling required for installation

Excludes Daytona, Rumble Bee and SRT-10 models

Features:

The aluminum bases of these step boards are covered in black molded polymer for sure footing. Each board sits close to your vehicle's frame for a streamlined look. Custom mounting kit included.

Installation Notes:

Drilling required for installation

Excludes Daytona, Rumble Bee and SRT-10 models

Features:

The aluminum bases of these step boards are covered in molded polymer for sure footing. Integrated light assemblies turn on when doors are open. Boards sit close to your vehicle's frame for a streamlined look. Custom mounting kit included.

Installation Notes:

Drilling required for installation

Excludes Daytona, Rumble Bee and SRT-10 models

Features:

Straight-style step bars with wide, top-mounted, non-slip pads give your vehicle a rugged look. The 4" wide oval bars are made of black powder coated steel and have molded endcaps to keep out moisture. Custom, no-drill mounting kit included.

Installation Notes:

No drilling required for installation

Excludes Daytona, Rumble Bee and SRT-10 models

Features:

Custom-fit, round nerf bars have wide, non-slip step pads that help you easily enter and exit your vehicle. Constructed of carbon steel with a black powder coat finish to resist chipping, peeling, and fading. Custom installation with mounting kit.

Installation Notes:

No drilling required for installation

Features:

The curved ends on these polished stainless steel step bars give your vehicle a streamlined look. Footpad areas are recessed, rather than cut out, preserving the strength of the steel and providing a solid, rustproof step into your truck.

Installation Notes:

No drilling required for installation

Excludes Daytona, Rumble Bee and SRT-10 models

Features:

These 6" wide, black aluminum running boards sit close to your vehicle's frame for a streamlined look. The 1-piece, non-slip step pad on each board is made of soft, durable rubber, providing better grip than a molded step surface.

Installation Notes:

Drilling required for installation

Excludes Daytona, Rumble Bee and SRT-10 models

Features:

Custom-fit, oval nerf bars have extra-wide, non-slip step pads that let you easily enter and exit your vehicle. Fully sealed ends with 20-degree bends offer a finished look and prevent internal corrosion. Constructed of rustproof carbon steel.

Installation Notes:

No drilling required for installation

Features:

Get in and out of your vehicle easily with these 6" oval side bars. Extra-wide, non-slip step pads provide sure footing for all passengers. Polished stainless steel is extremely resistant to rust and corrosion. Custom installation kit included.

Installation Notes:

No drilling required for installation

Features:

Straight-style step bars with wide, top-mounted, non-slip pads give your vehicle a rugged look. The 4" wide oval bars are made of polished stainless steel and have molded endcaps to keep out moisture. Custom, no-drill mounting kit included.

Installation Notes:

No drilling required for installation

Excludes Daytona, Rumble Bee and SRT-10 models

Features:

The curved ends on these step bars give your vehicle a streamlined look. Made of rust-resistant chrome-plated steel, these 3" diameter round bars have recessed step areas that prevent internal corrosion. Non-slip step pads provide sure footing.

Installation Notes:

No drilling required for installation

Tube steps are installed by attaching mounting brackets with the existing body mount bolts

Excludes Daytona, Rumble Bee and SRT-10 models

Features:

These 3" round tube steps make it easier to climb in and out of your truck. Their molded plastic step pads are non-skid for secure footing. Black powder coat finish on the steel resists rust and corrosion. Custom installation kit included.

Installation Notes:

No drilling required for installation

Features:

Straight-style step bars with wide, top-mounted, non-slip pads give your vehicle a rugged look. The 4" wide oval bars are made of polished stainless steel and have molded endcaps to keep out moisture. Custom, no-drill mounting kit included.

Installation Notes:

No drilling required for installation

Excludes Daytona, Rumble Bee and SRT-10 models

Features:

Straight-style, extra-wide step bars give your vehicle a rugged look. Polished stainless steel, oval tubes have molded plastic endcaps to keep out moisture. Oversize, 5" wide step pads provide sure footing. Custom mounting kit included.

Installation Notes:

No drilling required for installation

Excludes Daytona, Rumble Bee and SRT-10 models

Features:

Straight-style step bars with wide, top-mounted, non-slip pads give your vehicle a rugged look. The 4" wide oval bars are made of black powder coated steel and have molded endcaps to keep out moisture. Custom, no-drill mounting kit included.

Installation Notes:

No drilling required for installation

Excludes Daytona, Rumble Bee and SRT-10 models

Features:

Custom-fit, oval nerf bars have extra-wide, non-slip step pads that let you easily enter and exit your vehicle. Fully sealed ends with 20-degree bends offer a finished look and prevent internal corrosion. Constructed of rustproof stainless steel.

Installation Notes:

No drilling required for installation

Features:

These 6" wide, brushed aluminum running boards sit close to your vehicle's frame for a streamlined look. The 1-piece, non-slip step pad on each board is made of soft, durable rubber, providing better grip than a molded step surface.

Installation Notes:

Drilling required for installation

Excludes Daytona, Rumble Bee and SRT-10 models

Features:

Straight-style, extra-wide step bars give your vehicle a rugged look. Black powder coated steel, oval tubes have molded plastic endcaps to keep out moisture. Oversize, 5" wide step pads provide sure footing. Custom mounting kit included.

Installation Notes:

No drilling required for installation

Excludes Daytona, Rumble Bee and SRT-10 models

Features:

Custom-fit, round nerf bars have wide, non-slip step pads that help you easily enter and exit your vehicle. Constructed of stainless steel with a polished finish that resists chipping, peeling, and fading. Custom installation with mounting kit.

Installation Notes:

No drilling required for installation

Features:

The curved ends on these affordably priced step bars give your vehicle a streamlined look. The non-slip step pads in these powder coated steel, 3" diameter bars sit in recessed areas instead of cutouts to inhibit internal corrosion.

Installation Notes:

No drilling required for installation

Tube steps are installed by attaching mounting brackets with the existing body mount bolts

Excludes Daytona, Rumble Bee and SRT-10 models

Features:

These 6" wide, brite anodized aluminum running boards sit close to your vehicle's frame for a streamlined look. The 1-piece, non-slip step pad on each board is made of soft, durable rubber, providing better grip than a molded step surface.

Installation Notes:

Drilling required for installation

Excludes Daytona, Rumble Bee and SRT-10 models

Features:

Straight-style, extra-wide step bars give your vehicle a rugged look. Black powder coated steel, oval tubes have molded plastic endcaps to keep out moisture. Oversize, 5" wide step pads provide sure footing. Custom mounting kit included.

Installation Notes:

No drilling required for installation

Excludes Daytona, Rumble Bee and SRT-10 models

Features:

The curved ends on these black powder coated steel steps give your vehicle a streamlined look. Wheel-to-wheel, full-length tubes let you access both your truck cab and bed quickly and easily. Footpad areas are recessed to prevent internal corrosion.

Installation Notes:

No drilling required for installation

Designed for models with 6-1/2' bed only

Tube steps are installed by attaching mounting brackets with the existing body mount bolts

Excludes Daytona, Rumble Bee and SRT-10 models

Features:

These 3" round tube steps make it easier to climb in and out of your truck. Their molded plastic step pads are non-skid for secure footing. Polished stainless steel tubes provide lasting durability. Custom installation kit included.

Installation Notes:

No drilling required for installation

Features:

Get in and out of your vehicle easily with these 6" oval side bars. Extra-wide, non-slip step pads provide sure footing for all passengers. Semi-gloss black powder coated aluminum is durable and rust resistant. Custom installation kit included.

Installation Notes:

No drilling required for installation

Features:

The curved ends on these black powder coated step bars give your vehicle a streamlined look. Footpad areas are recessed, rather than cut out, preserving the strength of the steel and providing a solid, rustproof step into your truck.

Installation Notes:

No drilling required for installation

Excludes Daytona, Rumble Bee and SRT-10 models

Features:

The curved ends on these black powder coated steel steps give your vehicle a streamlined look. Wheel-to-wheel, full-length tubes let you access both your truck cab and bed quickly and easily. Footpad areas are recessed to prevent internal corrosion.

Installation Notes:

No drilling required for installation

Designed for models with 8' bed only

Tube steps are installed by attaching mounting brackets with the existing body mount bolts

Excludes Daytona, Rumble Bee and SRT-10 models

Features:

Custom-fit, round nerf bars have wide, non-slip step pads that help you easily enter and exit your vehicle. Constructed of carbon steel with a black powder coat finish to resist chipping, peeling, and fading. Custom installation with mounting kit.

Installation Notes:

No drilling required for installation