Customers compare ETLSB to these similar products
Products Featured in this Video
Jake: Hey guys, it's Jake here at etrailer. Today we're going to take a look at the Brophy utility shelf for e-track. The shelf is going to hold a variety of different things. Here you see we have a few hand tools on here. It's going to mount in the track of your e-track or x-track. The shelf is going to work in many different applications, such as in a trailer, in your garage at… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The Brophy Utility Shelf for E-Track - 18" Wide x 10" Deep - Black #ETLSB is not rated for a certain weight, so I wouldn't trust it for your 52 lbs when traveling. Instead I recommend using the CargoSmart Shelf Brackets for E-Track or…
view full answer...The tow hooks on your 2015 Chevrolet Silverado 3500 do not need to be removed to install the Draw-Tite Front Mount Trailer Hitch Receiver part #65078. The bolts that hold the tow hooks do get removed but only to set the trailer hitch in place as they…
view full answer...I called my contact at RackEm and asked about the Fitz-All Enclosed Trailer Ladder Rack, part #RA-28 and your all aluminum trailer. They told me that two sets would be ideal for your trailer since it is 12-ft long and the load capacity would be…
view full answer...The weight capacity for Rackem Fitz-All Enclosed Trailer Ladder Rack part #RA-28 at a 7 ft width is 400 pounds. These racks are designed for fiberglass ladders, if you need more capacity another set can be added to spread the weight out more.
view full answer...It could be that the springs are worn out and need to be replaced with either new springs or a new system such as #CB250D96SHD. Inspecting, working on, and/or installing these systems is not something you would want to do yourself because they can be…
view full answer...Starting with the safety chains they really need to be attached to the trailer frame and not the coupler hardware. If there is no where to attach the chains on the trailer you can weld on safety chain mounting brackets such as #MB12, #MB38, or #MB58.…
view full answer...The bump stop of your 2020 Chevy Silverado 2500 actually is not held in with a bolt and to remove it you would just need to pry it out.
view full answer...Between SumoSprings and Air Bags, I recommend going with a set of Air Lift LoadLifter 5000 air bags. They offer better all around support and are adjustable. There are two options for your truck depending on what length bed you have. Both options are…
view full answer...The Erickson Horizontal E-Track, part #E19148 has 1/4 inch diameter mounting holes spaced 2 inches apart. The screws you use should be at least long enough to go 3/4 inch into the wood you are mounting the track to. The more screws you use the more…
view full answer...It sounds like to me that you are wanting to attach shelves to the e-tracks in your box truck. If that is the case then what we have for this is the CargoSmart Shelf Track Brackets part #3481726 which I think is what you are looking for but if it is…
view full answer...In order to find if the B&W Biker Bar Motorcycle Tie-Down System #BWMC2301 will fit your 2021 Harley Davidson Tri Glide you will need to measure. You will be able to use this system as long as your frame tube diameter is 1-1/8" - 1-1/4"…
view full answer...The #ILL72CB is actually pretty bright. It puts out 513 effective lumens so it would do a great job as a reverse light for an enclosed trailer. Typical reverse light bulbs are rated between 350-500 lumens so this would work just as well as standard…
view full answer...