Custom Fit 2005 Toyota RAV4 Accessories

The Thule Spare Me Bike rack part #TH963PRO and the Yakima Spare Tire part #Y02599 both do come with locks to secure the rack to your spare tire and cable locks to secure the bikes to the carrier. The biggest difference between the two and is only an…

The lock is still locked if the knob just spins. You would need to turn the key the other direction. This will engage the knob to the threads and will allow the knob to loosen the rack.

You are correct the Tow Ready Custom Fit Vehicle Wiring, item #118389, has a ground wire that is attached to a ground location behind the vehicle tail light and the Hopkins Custom Fit Vehicle Wiring, item #33465, does not have an extra ground wire.…

The hitches for the 2005 Toyota RAV4 are a completely different design than those that fit 2006 and newer models. This is because of design changes on the vehicle. A hitch from a 2006 or newer would physically not fit a 2005. Even if you were to move…

For your application, to add electric trailer brakes to your system without needing to splice into any factory wires, you could use the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit, #119250KIT.…

The wire that you see in the pictures for the Curt Trailer Hitch, #C11290, is called a fishwire or bolt leader. It is used to pull bolts and other hardware needed for hitch installation into place in hard to reach or otherwise inaccessible places on…

The hitch you would want for your 2005 Toyota Rav4 would be the Curt Hitch part #C13524 which is a confirmed fit. I attached an install video for this hitch for you to check out as well. For trailer wiring you would want the part #118389. For ball…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…