Custom Third Brake Light Camera for 8" Factory Monitor - Night Vision
Item # 3460006
Our Price: $421.91
Confirmed to Fit
2015 Ford F-450 Super Duty
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (31)
- Q & A (0)
- Photos
2015 Ford F-450 Super Duty - Custom Third Brake Light Camera for 8" Factory Monitor - Night Vision
- Backup Camera
- Third Brake Light
- Third Brake Light Camera
- For 8 Inch Factory Monitor
- GCH Automotive
Custom bezel with camera mounts behind your third brake light. Line up your fifth wheel or gooseneck trailer using your Ford F-450 Super Duty's factory monitor. Switch kit lets you toggle between views from your backup camera and third brake light camera.
Features:
- Custom bezel with camera mounts behind your third brake light so you can see into your truck bed
- Works with your 8" factory monitor
- Assists in connecting your fifth wheel or gooseneck trailer
- Only functions while in reverse
- Camera manually adjusts 360-degrees for a perfect angle into your truck bed
- Gives you a 150-degree viewing angle
- Rear assist marker lines generated by camera show distance from other objects
- 0 Lux night vision produces a quality picture in complete darkness without IR transmitters
- Switch kit allows you to toggle between truck bed camera and your factory backup camera
- Waterproof, aluminum camera resists dust and corrosion
- IP69-rated to protect against dust and close-range, high-pressure spray downs
- Installation - uses your existing hardware
- Drilling is required if you choose to mount the flip switch
Specs:
- Camera bezel dimensions: 11-3/8" wide x 4-1/8" tall x 1-11/16" deep
- Mounting hole spacing: 9-13/16" center to center
- Camera diameter: 1-1/2"
- Resolution: 620 Lines
- Voltage: 12V - 24V DC
- Wiring harness: 24' long
- 3-Year warranty
Rear Assist Lines
The rear assist lines generated by the system's camera make connecting your fifth wheel camper or gooseneck trailer a one-person job. The lines appear on your 8" factory monitor and show the distance from other objects, allowing you to accurately line up your connection point when hooking up your camper or trailer.
0 Lux Night Vision
0 Lux night vision produces a quality picture and gives you the flexibility you need when hooking up your camper or trailer. You can line up your connection point in low-light conditions at dusk, or in complete darkness at night without the aid of IR transmitters.
Switch Kit
The switch kit adds a new dimension to your current setup, allowing you to toggle between views from your truck bed camera and factory backup camera with the flip of a switch. The integrated flip switch can be mounted inside of your truck to give you a clean OEM look and easy access.
Simple Installation
Simply unscrew and unplug your factory third brake light. Once removed, set your new custom bezel with camera in place. Feed the 6' camera wire through the opening into your truck and re-install your factory third brake light in front of the custom bezel.
Connect your 6' camera wire to the 18' wiring harness. This combined 24' wire will extend through your head liner or door sill panel along the edge of the floor, up to the front of your truck, and connect with the included ground and power wiring harness. The power wire will run to your truck's battery.
The switch kit installs by connecting one end of the included T-harness into the factory plug behind your radio, and the other end into the back of your radio. The integrated power wire for the flip switch will run to 12V accessory power.
FRDBRK360SW-K1 Truck Bed Camera for Factory 8" Monitor - Night Vision - Switch Kit
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Wrong item was ordered
- Defective
- Product did not meet expectations
Customer Reviews
Custom Third Brake Light Camera for 8" Factory Monitor - Night Vision - 3460006
Average Customer Rating: 4.5 out of 5 stars (31 Customer Reviews)
Custom bezel with camera mounts behind your third brake light. Line up your fifth wheel or gooseneck trailer using your vehicle's factory monitor. Switch kit lets you toggle between views from your backup camera and third brake light camera.by: Lynn02/12/2024
2016 Ford F-350 Super Duty
This showed up quickly even during the Christmas rush. The install was easy with the provided video. I did not use the switch that was provided, instead I used my factory up-fitter switch since I didn't want to drill any unnecessary holes. The camera displays on the factory 8" screen just like the tailgate camera with the flip of a switch. I can now back up to my gooseneck trailer without all the guessing. I can now see it easily! I wish I had found this option years ago!
by: John10/14/2022
The product works, but the rear camera is not mounted perpendicular but rather skewed so the view backing up to the camper is lopsided. It looks like the camera will adjust left and right but nothing to get it where it should be. It's better than nothing at all, but for the price I'm rather disappointed.
by: Rick 02/28/2023
Cameron works just like it's supposed to night vision is excellent. Makes it easy to hook upto 5th wheel.
Rick
8/18/2023
Great product works just like they said it would. Night vision is excellent makes it easy to hook up. I highly recommend this product.
Mike L.
9/13/2023
@Rick We're glad to hear that you're happy with your purchase!
by: Allen 04/13/2023
Ford F-250 Super Duty
This camera conversion kit works great on my F250. I can use it with the original tailgate and have two views backing up. I can also use a goosneck tailgate and still have a view of the bed as I backup to the trailer. Easy install, good camera function. Had to add a dab of silicone to their gasket.
by: Carl 04/05/2023
Very easy to install and works great for hooking 5th wheel and gooseneck up.
by: Cubanlink3103/30/2022
I just installed this on my 2015 F250. The install was extremely simple and took me less than hour. Love that I can use factory screen to see the camera . I was able to install this with my truck having the Sync 3 radio which I think comes on the 2017 and newer trucks. Also I have a Recon 3rd break light and just had to make minor adjustment to camera frame to make it work with that break light. In the end very pleased with the product and easy of use and set up.
by: David S03/31/2020
National
Ford add on rear view truck bed camera makes hitching my fifth wheel camper very easy giving me full view of truck bed and hitch line up from within the cab. Installation was a little more difficult then I first thought but was able to figure a way to install wiring in the sealing area. Could not get rear view camera to work at first, contacted etrailer and was cent an e mail with a picture of the wiring diagram fully connected and found a step was left out and made changes and camera worked grate. etrailer has grate support staff and user friendly. Went on a 6000 mile trip in the fall and visited the Mid West and visited 13 National Parks.
by: Steve W12/31/2018
2016 Ford F-350 Super Duty
Very easy to install had to return the first one did not work. This one works great you should check it all out before running all the wires. I did that this time and it all worked then I installed it all works great. The return thing with etrailer is very good they are all great people to work with. They will get you the answers you need
Steve W.
12/31/2019
Works great no problems
by: Terry 06/06/2023
2015 Ford F-250 Super Duty
It looks like it will work. going to install it this weekend Then i will tell you what I think.
by: David 08/16/2022
The way the camera bracket is designed, it is not compatible with after market 3rd brake lights. However, some modification to the bracket may allow it to fit.
by: Paul04/12/2021
Excellent quality camera! It is so nice to have a view of the bed while backing up. I imagine it also will help with backing up when I have the tailgate down. Install was pretty easy after watching the excellent video here on etrailer. I would have been lost without it as the printed installation instructions are terrible. Also, it would have been nice if it included everything needed like the self-tapping screws and fuse tap and such, given the price. So knocking a star for those things. But otherwise I'm really happy with it and it is a must-have upgrade for any truck owner.
by: Robert 09/11/2021
2016 Ford F-350 Super Duty
I am verry satisfied with this purchase. Backing up to my fifth wheel is much easier. Before, I’d do a pretty good job most of the time aligning the hitch with the king pin but this makes my success rate much higher. I opted to have my mechanic install it as I wanted the camera connected to one of my Aux upfitter switches and none of the online instructions I found clearly showed how to do it. Very happy with his work and the overall result.
by: Don S01/03/2021
2016 Ford F-350 Super Duty
Great camera to use when hooking up to my Goosebox. Connected to one of my uplifter switches in 2016 F350 Dually and works awesome. Highly recommend!
by: Michael02/19/2022
Great product easy install. Would have been 5 stars but I dont like having to put a splice to extend the power wire. Should have built a harness with a long power wire to cut to length. Other than that total happy with it.
by: Danniel08/29/2019
2015 Ford F-350 Super Duty
Received the camera and installed it. I watched the installation video on the etrailer site and i was very helpful. The camera works great.
by: Dave T09/21/2019
Product is great works well. Installation instructions were vague and required some trial and area. Once I figured out what needed power the installation went well.
by: Charles10/08/2022
Shorted the new and factory cameras both out
Jenny N.
10/20/2022
We have not heard of the camera shorting out in the truck. This camera does have a three year warranty and I will have customer service reach out to you.
by: Ana09/26/2022
2011 Ford F-250 Super Duty
Our experience has been horrible. This item was returned and another was purchased at the recommendation of one of the techs and it still doesn't work. Needless to saw we've paid for an item we cannot return and doesn't work for our vehicle. Will not purchase from you again (and we've ordered from you many times).
by: Avril06/12/2021
Excellent service thank you etrailer
by: Jeanne 08/23/2022
Wwwe had this installed on my husband’s truck and he absolutely loves it! Wish we had bought it sooner!
by: Al B.09/10/2020
Easy install. Working exactly as advertised on my 2015 f250
by: Sandy 02/10/2024
2016 Ford F-250 Super Duty
by: David06/28/2019
Easy install and works well.
by: William 07/25/2021
Wow! what quick service and delivery, I'm impressed.
by: Ernesto 07/16/2023
25
31
Show More Reviews
See what our Experts say about this GCH Automotive Accessories and Parts
- How Much Power Does the Camera for the Truck Bed Cargo Camera for Factory Monitor 3460006 DrawThe Truck Bed Cargo Camera for 8" Factory Monitor part # 3460006 which is a fit for your 2016 Ford F-350 will only draw around 0.3 amps. I spoke with GCH and they recommend that you use a 3 amp fuse for the switch. If you cannot replace one of the fuses on your existing power source then it would be best to run this directly to the battery. It will not draw power when the vehicle is off.
view full answer... - Can Upfitter Switch be Used for 3rd Brake Light Camera on 2016 Ford F-350Yes, you can install the Custom Third Brake Light Camera for 8" Factory Monitor # 3460006 on your 2016 Ford F-350 using one of the upfitter switches instead of the red toggle switch that comes with the unit. I am attaching a photo of the installation instructions that you can check out as well as a sample installation video you can reference. In this video we did use the red toggle switch so your install will look a little different.
view full answer...
- Troubleshooting Camera Not Supported Error on GCH 3rd Brake Light Camera for 2021 Ford F-250 What's likely going on with your Custom Third Brake Light Camera for 8" Factory Monitor - Night Vision # 3460006 is down to the power source of the camera, as this is most frequently the culprit when we see this error pop up. Sometimes the upfitter switches aren't powered correctly so I would verify the power on the switch to start. I would also need to know if the signal is going through when the vehicle is put in reverse at all, or if this happens when switching between the 3rd brake...
view full answer... - Black Screen With Custom Third Brake Light Camera on 2013 Ford F-250If you are getting voltage, there are only a couple things I can think of that would be causing a black screen with the Custom Third Brake Light Camera for 8" Factory Monitor # 3460006 on your 2013 Ford F-250. One - and I know this is very basic but I do have to mention it - is that it will only work if you are in reverse, so make sure you're in reverse when seeing if it will work. Otherwise, the other thing that may be occurring is a connection not being fully seated or somehow crimped.
view full answer... - Third Brake Light Camera for 2015 Ford F-250 With 8" MonitorFor a third brake light camera I recommend the Custom Third Brake Light Camera # 3460006. This camera adjusts 360 degrees with a 150 degree viewing angle and will be compatible with the 8" monitor in your F-250 Platinum.
view full answer... - Does The Custom Third Brake Light Camera For Factory 8" Monitor Work With The Sync 3.4 System?Yes, the Custom Third Brake Light Camera for 8" Factory Monitor # 3460006 will work just fine with the Sync 3.4 system on your 2015 Ford F-350 Super Duty Lariat Crew Cab. I have also included a video of # 3460006 being installed on a 2015 Ford F-350 Super Duty for you to check out as well.
view full answer... - Can Upfitter Dash Switch Be Used To Switch Camera Views On a 2015 Ford F-350 Super Duty?Yes, you can use the upfitter switch on the dash of your 2015 Ford F-350 to switch the Custom Third Brake Light Camera # 3460006 on the 8" dash screen when you need to switch from the bumper camera to the 3rd brake light camera. You will simply need to tie in your upfitter switch in place of the switch that comes in the kit.
view full answer... - Adding Another Camera to Monitor Behind a Fifth WheelI have a possible solution for you. First, though, there isn't a way to get another camera to work with your factory monitor since that is already hooked up to the Custom Third Brake Light Camera, part # 3460006. Instead, you will need another camera that comes with its own monitor. I recommend the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision, part # FOS43TASF. It can be wired into your running lights as an observation system or into your reverse lights as a backup...
view full answer... - Installing GCH Truck Bed Cargo Camera # 3460006 on 2013 Ford F-350There aren't any additional instruction manuals from GCH regarding the interconnections of the Truck Bed Cargo Camera # 3460006 for your 2013 Ford F-350, however I have attached an image below that you might find helpful. This shows what the entire kit will look like when everything is connected with each other. As far as reaching the rear of the 8 inch monitor in your truck, I spoke with my contact at GCH and he said there should be a panel right above the monitor that stretches across...
view full answer...
- Troubleshooting Third Brake Light Camera For Ford Monitor That Is Not Showing Camera FootageRegarding the Custom Third Brake Light Camera for 8" Factory Monitor - Night Vision # 3460006, if your camera has the correct 12V power and you are still not getting the camera footage on the monitor then there must be a bad connection somewhere. I attached a photo of the instructions which shows the wiring layout. Make sure your wiring matches the diagram and then go through and check each connection to verify you don't have a connector that is loose or damaged. Another thing you can...
view full answer...
- Availability of Third Brake Light Camera for 2014 Ford F-250 FX4 LariatAll of our third brake light cameras for your 2014 F-250 can be found under truck cameras on the custom fit page for your truck. I have also added that link below. If you have a factory monitor you need one of the following based on the monitor size: -Custom Third Brake Light Camera for 4.2" Factory Monitor - Night Vision # 3460025 -Custom Third Brake Light Camera for 8" Factory Monitor - Night Vision # 3460006 If you do not have the factory monitor you could use the # 3460008 which...
view full answer... - Where do Red Wires on Custom Third Brake Light Camera for Ford Super Duty Connect toBoth of the red wires on the Custom Third Brake Light Camera for 8" Factory Monitor # 3460006 will connect to power on your 2015 Ford F-350, while the black wire needs to be connected to ground. When we installed this wiring kit on a 2015 F-350 we used a fuse tap # F2526 to fuse location 44 (auxiliary switches) on the passenger fuse panel. To get this whole system to work properly you will want to have both red wires connected to continuous power so that when you flip the switch it will...
view full answer...
- Can the Custom Third Brake Light Camera for a 2015 Ford F-350 Use Factory Upfitter SwitchThe Custom Third Brake Light Camera for 8" Factory Monitor part # 3460006 which is a fit for a 2015 Ford F-350 does come with a switch that can be substituted for a switch of your own such as a pre-existing upfitter stitch. This was been confirmed by the camera manufacturer. That said, I can't really offer installation advice if you choose to use said upfitter switch so that part will be up to the installer.
view full answer... - Troubleshooting A Custom Third Brake Light Camera That Wont Power OnSince the Custom Third Brake Light Camera for 8" Factory Monitor # 3460006 is just "plug and play" there is not going to be a whole lot to be done as far as troubleshooting goes. I recommend first checking your connections are in the right places and are seated fully into their receptacles. If your connections are good and fully seated, you can also check for power flow to the unit using a circuit tester # PTW2993. If there is power to the connector, then you know the issue is with the...
view full answer... - Does Custom Third Brake Light Monitor for Ford Trucks Come with Everything to InstallThis Custom Third Brake Light Camera for 8" Factory Monitor # 3460006 comes with everything needed to complete the install in your truck. It is a custom fit kit for your 2016 Ford F-350 and does not require additional install hardware beyond what comes with it.
view full answer... - Compatibility of 3rd Brake Light Cargo Camera with Toolbox In Ford Super DutyThe Truck Bed Cargo Camera for 8" Factory Monitor - Switch Kit part # 3460006 does feature a 150 degree angle image and 360 degree adjustable camera. If your tool box is up against the cab you can adjust the camera to see over it, but you probably won't even have to considering it's low profile. I have attached a screen shot of the video (and video) that shows the camera angle with a Gooseneck ball for your reference. Please keep in mind this particular camera is made for Fords with 8"...
view full answer...
- Resolution of Custom Third Brake Light Camera # 3460006The camera resolution of the GCH third brake light camera kit part # 3460006 is 620.
view full answer... - Third Brake Light Camera Kit for 2008 Ford F-250 with Kenwood Head UnitSince your truck has an aftermarket Kenwood stereo the camera kit you'd need is the Custom Third Brake Light Camera for Aftermarket Monitor # 3460007 that you referenced. The # 3460006 is for factory monitors on the newer Ford trucks. The # 3460007 will easily connect to the camera input wiring of your Kenwood.
view full answer... - Installation Instructions for the Truck Bed Cargo Camera for 8" Factory Monitor # 3460006I was able to take a picture of the instructions for the Truck Bed Cargo Camera for 8" Factory Monitor - Switch Kit # 3460006 that you referenced. The camera unit actually has a "T" harness that will send the video feed directly to the OEM monitor on your Ford Super Duty. I am not sure how the fitter switches are connected in your pickup but if one of them is connected to power you can simply connect the wire for the rocker switch to your OEM switch and just leave the rocker switch in...
view full answer...
- Do Both Red Wires on the Truck Bed Cargo Camera for a 2014 Ford F-350 Need PowerI spoke with GCH Automotive about the Truck Bed Cargo Camera for 8" Factory Monitor part # 3460006 which is a fit for your 2014 Ford F-350 with Sync 2 and they informed me that you can use either the red wire on the switch for power or the red wire on the adapter for power but both do not need to be ran. The reason you have a choice is because the red wire on the switch is mostly used when the camera is tired into an ignition circuit so it will act as an observation system and the red wire...
view full answer... - Is Custom Third Brake Light Camera For 8 Inch Monitor on 2015 F-250 Compatible With Sync 3.4Yes, the Sync 3.4 system on your 2015 Ford F-250 is compatible with the Custom Third Brake Light Camera for 8" Factory Monitor # 3460006. I have added links below to a video review as well as an install on a 2015 F-250 for you to check out of the Custom Third Brake Light Camera # 3460006.
view full answer... - Camera System for Hitching Goosneck or 5th Wheel Hitch on 2013 Ford Super Duty w/ Headache RackIf your headache rack doesn't block the 3rd brake lamp, we have an option that would work great for you. Take a look at the # 3460008 from GCH Automotive. This system is intended for use on vehicles that don't have the factory reverse camera, and the monitor is included. If your truck has a factory rear view camera already, use the # 3460025 which would utilize your factory 4.2 inch factory monitor. Even if the headache rack blocks the 3rd brake lamp itself, the camera extends about 1-1/2...
view full answer...
- How To Measure Your Screen To Find the Correct Third Brake Light Camera For a Ford F-250/F-350The correct way to measure the monitor is diagonally therefore if you got 8" from corner to corner across then the Custom Third Brake Light Camera part # 3460006 is correct for a 2016 Ford F-250 and also fits a 2008-2016 Ford F250/F350. In regards to installation, it is not difficult per say but it will take some time. The amount of time it will take is largely going to vary by experience level but I am sure if you take your time and remain patient it would not be too much of a hassle. I...
view full answer...
- Troubleshooting Truck Bed Cargo Camera on 2016 Ford F-350 with Factory ScreenFor your 2016 Ford F-350, the Truck Bed Cargo Camera for 8" Factory Monitor - Switch Kit # 3460006 is the correct fit. I reached out to their tech and he said since you are getting the switch over to a black screen it simply sounds like you aren't getting 12v power to the camera for it to sent the signal back. You will want to use a circuit tester like # PTW2993 to test the black power wire going to that camera and then trace that wire to determine why power is not getting to the camera....
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Video by:
Andrew K
Video by:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Installed by:
Cole B
Installed by:
Hayden R
Installed by:
Ryan G
Updated by:
Leah S
Updated by:
Adam Y
Edited by:
Amanda M
Test Fit:
David F
Written by:
Halie H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
10/31/2022
I would like to look into the issue with the skewed picture in the camera. Can you confirm the year, make, and model of your truck? Would you also be able to send a picture of the installed camera?