Buyers Products Over-The-Cab Truck Bed Ladder Rack - Aluminum - 800 lbs
Item # 3371501400
Retail:$1,146.11
Our Price: $978.10
You Save: $168.01
Confirmed to Fit
1976 Chevrolet C/K Series Pickup
6 Foot Bed
8 Foot Bed
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (30)
- Q & A (0)
- Photos
1976 Chevrolet C/K Series Pickup - Buyers Products Over-The-Cab Truck Bed Ladder Rack - Aluminum - 800 lbs
- Truck Bed
- Fixed Rack
- Buyers Products
- No-Drill Application
- Over the Cab
- Fixed Height
Outfit your Chevrolet C/K Series Pickup with this durable, over-the-cab ladder rack to haul ladders, conduits, lumber, or anything else the job demands. Load stops and full-length side rails help support and contain cargo. Lightweight aluminum won't rust over time.
Features:
- Extended-length truck bed ladder rack lets you haul ladders, lumber, and more with ease
- Over-the-cab extension allows you to carry longer loads on your vehicle
- Raised side rails provide load support for cargo
- Multiple cutouts can be used as tie-down points
- 6 Adjustable load stops help to prevent cargo from shifting
- Can also be used to separate items
- Work as tie-down points for securing your cargo
- Adjust easily along crossbars with hand knobs
- Curved grab-handles on rear of rack provide extra leverage for loading cargo
- Aerodynamic crossbars help reduce wind drag and noise
- Rounded shape also makes it easier to load and unload cargo
- Easy, clamp-on installation
- Stainless steel hardware included
- Rustproof aluminum construction is sturdy and lightweight
- Clear anodized aluminum finish is corrosion resistant
- Compatible with bed liners that do not cover truck bed side rails
Specs:
- Application: most full-size pickup trucks
- Weight capacity: 800 lbs
- Overall dimensions: 134" long x 76-3/8" wide x 35" tall
- Sits 29" above bed rails to clear most truck cabs
- Usable crossbar space (inside side rail to inside side rail): 62"
- Raised side rail height: 7"
- Load stop dimensions (each): 5-3/4" wide x 5-3/4" tall x 7/8" thick
- Rack weight: 97 lbs
- 1-Year warranty
Over-The-Cab Design
The Buyers Products ladder rack extends over the roof of your truck to better support your load and distribute its weight. The extra length allows you to carry longer loads without having to worry about overhang or hauling too much weight at the rear of your vehicle.
Easy, Clamp-On Installation
The ladder rack mounts to your truck bed rails with included hardware. Simply position the upright bases at the desired position along your bed rails, and use the J-bolts, washers, and nuts to clamp them in place. Each base is secured to the bed rails with 2 J-bolts.
Convenient Loading, Unloading, and Securing
The ladder rack includes raised side rails that provide load support and help to prevent cargo from sliding off during transport. They also make great anchors and tie-down points for securing items with straps, ropes, or bungees.
The rack includes 6 load stops that can be easily adjusted along the length of the crossbars. Simply loosen the knob on the underside of the load stop, slide it to the desired position, and tighten it in place. You can also use the load stops as tie-down points to anchor your cargo.
Curved grab handles on each side of the rack at the rear help you gain leverage when lifting cargo up and onto the crossbars.
Durable Aluminum Construction
The ladder rack is constructed of strong yet lightweight aluminum. The clear anodized aluminum finish is resistant to corrosion, chips, and scratches. The stainless steel hardware is also corrosion resistant.
1501400 Buyers Products Universal Over-The-Cab Truck Bed Rack - Clear Anodized Aluminum - 800 lbs
Installation Details
California residents: click here
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Defective
- Product did not meet expectations
Customer Reviews
Buyers Products Over-The-Cab Truck Bed Ladder Rack - Aluminum - 800 lbs - 3371501400
Average Customer Rating: 3.9 out of 5 stars (30 Customer Reviews)
Outfit your vehicle with this durable, over-the-cab ladder rack to haul ladders, conduits, lumber, or anything else the job demands. Load stops and full-length side rails help support and contain cargo. Lightweight aluminum won't rust over time.by: Alex07/01/2021
Absolute garbage. This is my second one in two years that has broke.
1st one broke the welds where the legs meet the actual rack. etrailer was kind enough to replace it under warranty. I shipped it to them and UPS lost it. Out $xxx due to UPS.
I go ahead and buy a second one assuming I just received a faulty one. A little over a year later, same issue. Ladder rack is unusable.
I have never put more than 300lbs on the rack. etrailer's customer support is excellent. This product is garbage though.
Luckily I caught it before it broke off while driving potentially killing someone.
by: Wesley01/31/2020
2016 Ford F-150
Over seems to be a good product. More pictures would have sped me up but not that tough to put together. Make sure to tighten the larger bolts slowly or use anti-seize lubes as it can weld itself together from the heat of friction only drawback with S.S bolts. One nut was missing outside of that it was complete.
by: KevinT04/26/2022
I give etrailer five stars.Great company,Great people,fast shipping However for the buyers products over the cab ladder rack I could only give four The rack is great Good welds and pretty easy to assemble.The instructions are a bit vague The picture on the box itself was actually what I ended up using instead.Also the bolts need to be bagged and tagged separately,rather than just all thrown into one giant bag to be sorted out.Do not be scared of this one,it is very easy to figure out
by: Bob07/02/2020
The strength and durability of the aluminum is excellent. The hardware is poor. The threads do not mesh correctly. Some hardware did not even tighten and seat all the way before binding (not cross threaded) and damaging the aluminum. I had to grind off or snap the bolts to replace with better grade stainless steel hardware. After a few months, some original hardware loosened and plastic end caps were lost. I removed from truck. I just dont have the time at the moment to replace the rest of the hardware. If the hardware was of better quality, I would have rated this product a 5 star. I would buy this product again with purchasing carriage bolts and nylon lock nuts elsewhere.
by: Raymond 06/27/2020
Good day to you all. For those who take the time to read reviews. What a product I have had several racks in the past that where $1800 custom made being a general contractor. This rack was very easy to assemble. Took a few hrs. Very durable looks great and saved over $1200 how could I go wrong.
by: Ricardo 04/18/2021
I am very pleased with my Universal OTC ladder rack. It has helped me through many a job and they look great on my black F-150
by: Pete 11/16/2022
Fit as designed, easy to install.
by: Jeffrey07/09/2021
After 4 months many various cracked and broke loose.
Had to pay to have them rewelded.
Sierra K.
7/14/2021
Thank you for your review. For future reference, always check the warranty. This one has a 1 year warranty.
by: Rebecca06/09/2022
Built like a beast. A little confusing when assembling but solid. I use to haul kayaks, and haul deer. Anything I have attached has made 5+ hour trips without issues.
by: Nicolas06/04/2021
Bolts are pulling threw on the rack. Scared to put anything heavier than a couple pieces of trim.
by: Mark 09/10/2023
by: Robert 09/07/2022
by: Jeffrey 01/21/2022
by: Andy09/15/2023
It's a pretty nice rack. I had to purchase longer bolts to make the center bolt together properly, which was annoying. It didn't come with all the parts, the box was beat to crap and something had fallen out, and it took three tries to get the replacement piece correct even though I sent a photo of the missing piece and the missing piece's product number. That was a year ago though and I've pretty much forgotten how frustrated I was at the time. The rack does sing when you get over 40 mph or so, but they all do. I took off the triangle pieces that are meant to pinch the ladder to the guard rails, I never used them, they were always just in the way and noisy. The rack is easy to take on and off if you have help, so I always take it off for longer trips so I don't have to listen to the thing.
It's the only rack I've ever owned, I can't compare it to anything. I like it, it's not going to rust and look bad in a couple years. I frequently push the weight limit on it and it's not bent yet. I'd order it again.
by: John B06/07/2020
I think it has a design flaw - The instructions are at On sheet 2, pictured is 'Bolt Set C' that shows 2 carriage bolts installed in 2 slots at opposite ends of bracket 8. Being at the end of a slot, the aluminum bracket will deflect a bit, which leads to looseness, which causes the bolt to slip out of the slot. When this happens twice, the bracket is loose, then it rattles over to the side and pushes the plastic end cap off. After the end cap is off, the bolt set falls off. It could be remedied with doubler plates, each with two holes to keep the bolts from moving away from each other. In addition, as another reviewer wrote, the square shoulders on 2 carriage bolts rounded the parallel sides of a groove in the aluminum cross member channel. In conjunction with the nylon thread lock bolts, it became very difficult to continue assembling properly or disassemble The design needs improvement. The light weight of the aluminum is nice. The flat black paint is fading in the desert southwest sun, but still matches the truck well. We just use it to carry a kayak and occasional lumber for home projects. If I were using it professionally, I wouldn't buy this rack; I'd get a welded steel one.
by: Robert06/24/2019
During assembly, the square shoulders on carraige bolts rounded over inside cross member channel. In conjunction with the nylon thread lock bolts, the channel in the cross members stripped out; thereby making it impossible to continue taking it fully apart without ruining certain parts. It was a safety issue that mandated disassembly. Im disappointed that this product couldn't withstand assembly before failing.
by: Frank 12/25/2019
The product is very nice after it is together. The instructions are had to follow. I had to buy a few extra bolts for mounting the crossbars because the originals would freeze up after a couple of turns. Besides that I think it is a great product.
by: John07/19/2022
Put it together myself in 5 1/2 hours in 90 degree heat. Went together perfectly. The only problem I had was I had to take off two of the small
supports in the side rail and both screws were either over tightened on
assembly or just too tight and had to replace the screws with new. Went together just fine. p.s. I am old and slow, but all done myself. I believe
the original posting said would not work with a job box. I have a 8ft. bed with a job box in hopes it would work, and it did.
by: Bruce 05/09/2020
there are several aspects to my purchase and all of them are great! Shipped/delivered ahead of schedule, great communications with the etrailer folks, and the product was exactly what I expected!
by: Mike06/08/2021
Has held up well and not had hardware get loose. Nicely built and plenty of tie down spots.
by: Trent 05/29/2021
Excellent ladder rack. easy to install. sturdy.
by: Scott 08/03/2021
Great product. The most solid truck rack I’ve had yet.
by: Tom 10/19/2021
Fast shipping, with great condition upon arrival. Went together with ease, looks great, and works as described.
by: Chris 09/06/2022
by: 02/28/2023
25
30
Show More Reviews
See what our Experts say about this Buyers Products Ladder Racks
- Will A Pace Edwards Contractor Rig Ladder Rack Work With A BakFlip Tonneau Cover On 2016 Ford F-250The Pace Edwards Contractor racks require a Pace Edwards/Leer tonneau cover that has either Ultragroove or Explorer series rails in order to mount. A BakFlip cover wouldn't have a way to connect with that style rack since it sits inside the bedrails and doesn't have an accessory slot. If you wanted to use that specific rack then you would need part # JEF6985-CR4008 if you have a SuperCab or part # JEF6985-CR3008 if you have a regular cab. If you want to stick with your current cover then...
view full answer... - Wind Deflector for Buyers Products Ladder RackThough there isn't a mesh available there is absolutely an air deflector for the Buyers Products Over-The-Cab Truck Bed Ladder Rack - Aluminum # 3371501400 or Black # 3371501410. The Wind Deflector Kit for Buyers Products Truck Bed Ladder Rack # 3371501193 will ensure you have a quieter ride in your 2017 Chevy Silverado. I have added links to video reviews of both the rack and wind deflector for you to check out.
view full answer... - Ladder Rack, Air Helper Suspension and Hitch Extension Options for 2008 Ford F350If your tonneau cover leaves the top surface of the bed sides free, we do have some ladder racks available that would work for you. The Thule TracRac SR, with cantilever # TH43003XT-010 or without # TH43003XT-010EX cantilever would be a great choice. The rack has an awesome 1250 lb capacity and has the ability for the uprights to slide back and forth for lots of load handling flexibility. The only possible downsides to the Thule SR is the cost and the fact that the rack upright angles...
view full answer... - Weight of the Erickson Over-The-Cab Truck Bed Ladder Rack item # EM07707I saw you were looking at two different ladder racks but neither of them are 12 ft and 1,200 lbs capacity. The Erickson Over-The-Cab Truck Bed Ladder Rack item # EM07707 you were looking at weighs 167 lbs. This fits a wide range of vehicles with 5-1/2, 6-1/2, and 8' bed lengths. If you would like me to verify that this one fits your truck go ahead and email me back with your year, make, model, and bed length. You may also want the Erickson Re-Tractable Ladder Rack Straps item # EM04425-2...
view full answer... - Is Cab Clearance an Issue for Thule TracRac SR on a 2022 Ford F-350 Super DutyThe last model year that had some issues with cab clearance with a ladder rack was the 2019 Super Duty trucks. Since you have a 2022 Ford F-350 you won't have any clearance issues with the Thule TracRac SR # TH43003XT-000. Just for reference, I had the opportunity to install the Buyers Products Over-The-Cab Truck Bed Ladder Rack # 3371501400 on a 2020 F-250 which I am attaching the video for so you can see there is clearance for that overhang.
view full answer... - Can Over-The-Cab Truck Bed Ladder Rack be Safely Used on F-150 with 5-1/2 Foot BedGreat question! I definitely see what your concerns are here, but one of the great things about the Buyers Products Over-The-Cab Truck Bed Ladder Rack # 3371501400 is that it's a pretty universal fit, so there are some adjustments we can make that allow this to fit short 5-1/2 foot beds up to 8 foot beds. If you check out the attached photo you can see that we have that top section hanging past the rear bumper a little on the 2017 F-150 so that the front bar isn't extended out really far....
view full answer...
- Is the Rear Crossbar On the Buyers Products Over-The-Cab Truck Bed Ladder Rack RemovableI do have a similar option for you but the rear crossbar on the Buyers Products Over-The-Cab Truck Bed Ladder Rack part # 3371501400 is not really designed to be easily removable. Instead, I recommend the Buyers Products Over-The-Cab Truck Bed Ladder Rack part # 3371501150 which does have a removable rear crossbar. The process to remove this rear crossbar is also very easy as all that is needed is to remove one pin per side so you will not even need any tools to do so. I have attached...
view full answer...
- Replacement Thule TracRac Load Stops and Ladder Rack Recommendation for 30 Ladder on 2013 F-150To replace the load stops on the Thule TracRac for your 2018 Chevy Colorado you need 3 different parts; the Load Stop # 8537165, M8 T-Bolt # 853-5715, and the Hand Knob # TAKB-90004. Obviously you'll need 2 of each if you need to replace both load stops, and you won't need the M8 T-Bolt if those are still intact with your ladder rack. For the 30' ladder on your 2013 Ford F-150 (or similar model year) you're going to need a ladder rack that extends over your cab so you don't have a massive...
view full answer...
- Ladder Rack Solution for Truck Bed with Camper Shell/Topper InstalledFor truck bed toppers/camper shells we have ladder racks that were designed to attach to the roof of them like the TracRac CapRac part # TH29200XT but there isn't a way to attach a ladder rack that attaches to the top of truck bed rails like the # 3371501400 that you referenced. I attached a picture of what the CarRac looks like installed on a camper shell for you to check out as well.
view full answer...
- Recommended Truck Bed Ladder Rack for a 2024 Toyota TundraHey Eric, it actually looks like the Pace Edwards Contractor Rig Rack Truck Bed Ladder Rack # 311-CR6008 is not going to work with your 2024 Toyota Tundra, unfortunately. You're going to have to use a different ladder rack like the Buyers Products Over-The-Cab Truck Bed Ladder Rack # 3371501400 which is similar to # 311-CR6008, and has an easy clamp on install with an 800 lb capacity.
view full answer... - Can 4th Crossbar be Added to Aluminum Buyers Products Over-The-Cab Truck Bed Ladder RackThe Buyers Products Over-The-Cab Truck Bed Ladder Rack # 3371501400 for your 2019 Ram 1500 comes with the 3 crossbars and when I reached out to my contact at Buyers Products there isn't a way to add a 4th. We do, however, have a similar option with part # 3371501150 which comes with 4 crossbars. This is black steel as opposed to the aluminum for the option you were looking at, and it actually has a higher weight capacity at 1,000 lbs as opposed to the 800 lb weight capacity of the aluminum...
view full answer... - Ladder Rack Options For 2018 Ford F-150 With Crossover ToolBox On Bed RailsThe Buyers Products Over-The-Cab Truck Bed Ladder Rack # 3371501400 is not adjustable along the bed rails and is not adjustable in height, although it can be installed in various positions in order to fit different sizes of truck beds. It is confirmed to fit the 2018 Ford F-150 you linked as your vehicle regardless if it has the 5-1/2 Foot Bed, 6-1/2 Foot Bed, or 8 Foot Bed. I think your best option is a roof rack so that you can have access to the entire truck bed along with the toolbox....
view full answer...
- Does Buyers Products Over the Cab Ladder Rack Come With All Hardware to Mount to 2018 Toyota TundraYes, the Buyers Products Over-The-Cab Truck Bed Ladder Rack # 3371501410 does come with everything you need in order to install it in the 6-1/2 foot bed of your 2018 Toyota Tundra, and no drilling whatsoever is required. It simply installs using J-hooks that attach under your Tundra's truck bed rails, as you can see by the linked installation instructions I added for you. The Buyers Products Over-The-Cab Truck Bed Ladder Rack # 3371501410 (Black) and # 3371501400 (Silver) have a hefty...
view full answer... - Can Two 34 Kayaks Fit on Buyers Products Over-The-Cab Truck Bed Ladder Rack on 2016 Ram 1500Yes, your 34" kayaks will both easily fit on top of the Buyers Products Over-The-Cab Truck Bed Ladder Rack # 3371501400 for your 2016 Ram 1500. This is compatible with truck beds that are 66" - 76" wide with the maximum width of the entire unit being 76-3/8" (which would be the crossbars). Since that's over 8" more than the width of both your kayaks you don't have anything to worry about laying them side by side. I believe the 76" dimension taken in the review video was for usable crossbar...
view full answer... - Fitment of the Pace-Edwards Contractor Rig # 311-CR4005 on 2022 Ford F-150While we do have a great contractor-type ladder rack that works for your 2022 Ford F-150 STX Super Crew with a 5-1/2 foot bed, the Pace-Edwards Contractor Rig # 311-CR4005 only works with certain Pace-Edwards tonneau cover models that have the Explorer Rails included. Unfortunately, we do not carry any Pace Edwards covers for your 2022 F-150 that include these rails. We also do not carry the Explorer Rails you need individually to mount to your bed rails. For a great alternative, I recommend...
view full answer...
Do you have a question about this Ladder Rack?
Info for this part was:
Video by:
Andrew K
Video by:
Jonathan Y
Edited by:
Tyler C
Expert Research:
Jameson C
Video Edited:
Chris R
Test Fit:
Hayden R
Test Fit:
Jon G
Updated by:
Alex H
Written by:
Mark S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Wesley
2/1/2021
Good at first but now I took it off the truck because I need parts and havent been able to get them.