DeeZee Customizable Truck Bed Ladder Rack with Tie-Downs - Side Mount - 200 lbs
Item # DZ95053
Our Price: $283.16
Confirmed to Fit
1998 GMC Sonoma
6 Foot Bed
7-1/2 Foot Bed
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (8)
- Q & A (0)
- Photos
1998 GMC Sonoma - DeeZee Customizable Truck Bed Ladder Rack with Tie-Downs - Side Mount - 200 lbs
- Truck Bed
- Fixed Rack
- DeeZee
- Drilling Required
- Side Mount
- Fixed Height
Safely transport long loads with a DeeZee customizable half ladder rack. The economical side-mounted rack leaves your truck bed open for cargo. It also includes a ladder stop and 2 Velcro tie-downs - everything you need to carry a load.
Features:
- Use the 2 side-mounted bars and create a ladder rack to transport your pipes, ladders, lumber or any long loads
- Designed with a built-in ladder stop
- Includes 2 hook and loop tie-down straps for securing cargo
- Install the rack on either the driver's or passenger's side of your truck bed
- Bolts to brackets mounted in the front and rear corner of your truck bed
- Constructed of 1/8" steel tubing that's finished with black powder coat to resist rust
Specs:
- Application: full-size truck beds
- Dimensions: 23" wide x 52-1/2" tall
- Weight capacity: 200 lbs
- 3-Year warranty
This economical side-mount ladder rack offers a complete system for carrying long loads - no accessory purchases necessary. A ladder stop is built into the rack, and two Velcro tie-downs are included to help lash down cargo. The support bars bolt into the front corner and rear corner of your truck bed and can be mounted on either the passenger's or driver's side of the bed. Each pair of bars is finished with a black powder coat to help prevent rust. The DeeZee half-rack has everything you need to transport long cargo while leaving your bed free for other freight.
DZ95053 Dee Zee Truck Bed Half Rack - Universal
California residents: click here
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Too difficult to install
- Wrong item was ordered
Customer Reviews
DeeZee Customizable Truck Bed Ladder Rack with Tie-Downs - Side Mount - 200 lbs - DZ95053
Average Customer Rating: 4.1 out of 5 stars (8 Customer Reviews)
Safely transport long loads with a DeeZee customizable half ladder rack. The economical side-mounted rack leaves your truck bed open for cargo. It also includes a ladder stop and 2 Velcro tie-downs - everything you need to carry a load.by: Eddiecamp03/23/2021
2017 Ford F-150
Delivery was fast as usual. The installation does take a couple hours and is much easier with a second set of hands. I have a drop in bed liner on my F150 so I did have to do some cutting but my oscillating tool made that a quick modification. Make sure to use the no seize on the bolts so they don't heat up when cranking them into place. Lastly, there are NO drain holes in the bottom of the tubes and believe me they do fill with water and ice in cold temps. I drilled two 1/2 in. holes in the sides at the bottom so they can drain but if I realized there were no weep holes I would have drilled a hole in the bottom of each before installation. After drilling the hole, make sure to coat with a primer and some paint to prevent rusting. Other than what I encountered they will serve their purpose and seem good overall.
by: John J11/12/2020
2021 Ram 1500
I’ve been using this ladder rack for a year now and it has stood the test of time. I love the ability to remove the arms when I’m not using them so my tonneau cover can be closed. Highly recommended for the occasional need for a tough ladder rack.
by: Jeff B.11/29/2016
2013 Toyota Tundra
I operate a roofing company in Texas and have owned this ladder rack for 1 year now. I am very happy with the product and have recommended to multiple of my co-workers as well.
by: Colby12/06/2018
2013 Ford F-150
Very pleased with this ladder rack everything was as advertised easy installation very good product!!!!
by: Steve W.01/26/2016
2016 Ford F-150
The product arrived about 24 hours after being ordered which was great. The product installed easily. The racks can be removed easily for the weekend and taking the truck through the car wash.
by: Adam01/25/2021
I have owned 4 different brands of the same style rack. This is the worst in quality out of all of them. I will be replacing it soon.
by: Jeffrey05/16/2019
2016 Ford F-250 Super Duty
Easy to order, good product.
Had an issue with UPS but otherwise all went smooth.
by: Keith09/02/2022
2021 Ram 1500
8
8
See what our Experts say about this DeeZee Ladder Racks
- Recommended Ladder Rack for Weekend Use for a 2013 GMC SierraIf you are planning on using the Erickson Truck Bed Ladder Rack # EM07708 everyone once in awhile then it will serve your intended purpose well. However if you will be using it frequently (even every weekend) I recommend using a more permanent option like part # DZ95053. This allows you to keep the base of the rack installed so that you aren't wearing out the hardware. We also have options like the Detail K2 Flip Rack # K2TFR150
view full answer... - Canoe Carrier Recommendation for 2016 Nissan Frontier with Utili TrackI have a great solution for you, but nothing we offer attaches directly to the utili track of your 2016 Nissan Frontier to allow it to carry a canoe. Instead we have the Ladder Rack part # DZ95053 which is a confirmed fit for your truck and would do an excellent job to carry a single canoe. Then for a strap setup the part # 297-15RSBB would work really well.
view full answer... - Will DeeZee Ladder Rack Work with 2013 Dodge Ram Pickup with Spray on Bedliner According to my DeeZee contact, Dodge Rams with a drop in bedliner may have to be trimmed, drilled or cut for proper installation of the DeeZee ladder rack # DZ95053. With a spray in liner you shouldn't have a problem unless the liner is very thick, in which case you may have to grind down the liner a little for proper installation. I have included a link to the installation instructions for you to check out.
view full answer... - Side Mount Ladder Rack for 2014 Ford F-150 with 6-1/2 Foot BedWe do carry two side mount racks that will work with your truck but the Erickson Side Mount Ladder Rack # EM07708 is not confirmed to fit your 2014 Ford F-150 with the 6-1/2 foot bed. It's designed for older model year Fords. I recommend the DeeZee # DZ95053 has a weight capacity of 200 pounds, can be installed on either side of the bed and includes tie-downs.
view full answer... - Ladder Rack Recommendation for 2017 Ford F-250 with Side Mount Tool BoxesThe only type of ladder rack we can recommend for your 2017 Ford F-250 that has the two side tool boxes is the DeeZee part # DZ95053 which can attach to the other side of your truck bed. There isn't a way to fit the Erickson Ladder Rack part # EM07705 with your current toolboxes.
view full answer...
- Ladder Rack to Use with DeeZee Toolbox Topsider # DZ67 2022 Ford F-250Since the DeeZee Toolbox Topsider # DZ67 installs on top of one of the bed rails you'd need a ladder rack that attaches to the other bed rail like with the DeeZee # DZ95053. This would be only way to fit both the box and a ladder rack with it.
view full answer... - Compatibility of DeeZee # DZ95053 Ladder Rack with 2010 Nissan Frontier Crew CabAs long as you have the required space between the wheel well and the front of the truck bed and your Frontier does not have the utili-track option, the DeeZee ladder rack you mentioned should work just fine. I have provided a diagram from the installation instructions that shows how the racks mount to the truck bed.
view full answer...
- Fit of DeeZee Customizable Truck Bed Ladder Rack # DZ95053 on 2004 Toyota Tacoma Double CabI spoke with my DeeZee representative who tells me that in order to install the ladder rack, you will need slightly more than 1-1/2 inches of clearance between the front of the truck bed and the wheel well, as shown in the provided diagram. If you have the proper clearance, the ladder rack will work great for you. If the wheel well goes all the way to the front of the box, then the DZ95053 would not be a good choice for you. A full rack that mounts to the top of the bed rails like the...
view full answer...
- How Does the DeeZee Customizable Truck Bed Ladder Rack # DZ95053 Install in a Truck BedDeeZee recommends that you bolt the DeeZee Customizable Truck Bed Ladder Rack # DZ95053 to the bed of your truck when you install it otherwise equipment damage or serious bodily injury could occur. Also, it would void the warranty. I attached a link to the installation instructions for you to check out also.
view full answer... - Truck Bed Ladder Rack With Mounting Hardware Located Below The Bed Rails With Upper Rack RemovedThe mounts for the TracRac Contractor Truck Bed Ladder Rack # TA14750 fasten to the top of the bed rail. You would have to remove the entire assembly rather than only removing the top portion of the rack. You will want to consider the DeeZee Customizable Truck Bed Ladder Rack # DZ95053 as these with the upper tubes removed will sit below the to of your bed rails.
view full answer... - Will the DeeZee Customizable Truck Bed Ladder Rack # DZ95053 fit a 2005 GMC Sierra 2500HDYes, the DeeZee Customizable Truck Bed Ladder Rack # DZ95053 has been confirmed by DeeZee as a fit for your 2005 GMC Sierra 2500HD with a 6-1/2 ft bed. If your kayak is 23 wide or less it should have no problem fitting it on the # DZ95053 as it has an width of 23 inches. If it is wider than that you may have to carry the kayak on its side. You may also be interested in Yakima Bow/Stern Ratcheting Tie-Down Straps # Y04031 to secure the kayak.
view full answer... - Ladder Rack Compatible with 2013 Dodge Ram with Ram BoxThe MaxxHaul Truck Bed Ladder Rack MT70386 is not a fit for your Ram Boxes. There isn't a ladder rack we carry from any of our manufacturers that is compatible with the Ram Box that fits on the bed rail. The only fit would be the side mount racks like the following: Thule TracRac Contractor Truck Bed Ladder Rack - Side Mount - Steel - 250 lbs # TH14750 DeeZee Customizable Truck Bed Ladder Rack with Tie-Downs - Side Mount - 200 lbs # DZ95053 Erickson Truck Bed Ladder Rack - Side Mount...
view full answer... - DeeZee Half Ladder Rack # DZ95053 for 2008 Chevy SilveradoAccording to our friends at DeeZee, the # DZ95053 half ladder rack you mentioned will indeed fit your 2008 Chevy Silverado. To see the install instructions, click on the provided link. I have also linked you to our entire selection of ladder racks that would be compatible with your truck.
view full answer... - Ladder Rack for a 2006 Toyota Tacoma with Factory Bed LinerWe have several ladder racks that will fit your 2006 Toyota Tacoma with factory liner. I have included a link to the options for you. The T-Rac, # TH37004XT, is one of the options that you can use. The TracONE, # TH27000XT-TAEX is one more economical option. It is also available in black # TH27000XTB-TA. The lowest cost option is # DZ95053 but it only installs on one side of the truck bed. I have included some instruction links as well.
view full answer... - Can DeeZee Truck Bed Ladder Rack Mounts Be Purchased Separately?The DeeZee Customizable Truck Bed Ladder Rack with Tie-Downs - Side Mount - 200 lbs # DZ95053 you asked from does not have replacement parts. You will need to purchase the entire kit to get the part you are needing for installation.
view full answer... - Ladder Rack For 2000 Toyota Tacoma PickupThe most economical ladder rack we offer for your 2000 Toyota Tacoma is the DeeZee Customizable Truck Bed Ladder Rack with Tie-Downs, part # DZ95053. These are a side mount and install on either the driver's or passenger's side of your truck bed. The dimensions are 23 inches wide and 52-1/2 inches tall and have a weight capacity of 200 lbs. This rack is designed to fit either 6 or 7 ft truck beds.
view full answer... - Ladder Rack for 2016 Ram RebelWe do have a product that can carry that large of a ladder on the roof of your 2016 Ram Rebel. Part # EM07706 is a great solution and it fits any bed length on Rams. However, this part doesn't work if your truck has Ram Boxes on the bed. Part # DZ95053 is designed for bed six and a half feet and longer, so it won't work for your application.
view full answer... - Recommended Side Mount Ladder Rack for a 2008 Ford F-150You are correct in that the Erickson Truck Bed Ladder Rack part # EM07708 is not confirmed to fit your 2008 Ford F-150 with the 5-1/2' bed. I do have a very similar option for you to consider that is a confirmed fit for your vehicle. I recommend the DeeZee Customizable Truck Bed Ladder Rack with Tie-Downs part # DZ95053 as it can support up to 200 lbs.
view full answer... - Can DeeZee Customizable Truck Bed Ladder Rack # DZ95053 Fit Truck with Tommy GateYou can install the DeeZee Customizable Truck Bed Ladder Rack # DZ95053 in the bed of a truck that has a Tommy Gate but you'll just have to have the rear upright a bit further forward so that it clears the gate.
view full answer... - Side Mounted Ladder Rack for 2005 Nissan Frontier King CabThe Erickson Truck Bed Ladder Rack - Side Mount - Steel - 250 lbs # EM07708 is a great system that requires no drilling, but is not able to have a base that remains when the vertical is removed. All the other ladder racks that are similar and have the removable vertical portion require drilling and bolting to the bed of your truck for support. The available models for this are: DeeZee Customizable Truck Bed Ladder Rack with Tie-Downs - Side Mount - 200 lbs # DZ95053 TracRac Side-Mount...
view full answer... - Will the DeeZee Ladder Rack Fit on a 2021 Toyota Tacoma with the Deck Rail SystemI have a possible solution for you. First, though, the DeeZee Truck Bed Ladder Rack, part # DZ95053, can fit 2021 Toyota Tacomas without the Deck Rail system. Yours has this system, so this won't work for you. Instead, I recommend using the Rola Haul-Your-Might T3, part # 59799. This ladder is compatible with the Deack Rail system. It has an 800-lb capacity and universal T-slots for accessories. I've linked to a video review of this below.
view full answer... - Video Showing DeeZee DZ95053 Ladder Rack Being InstalledIf you click the provided link (scroll down the page a bit), you'll be able to view a video showing the DeeZee # DZ95053 ladder rack being installed on a 2013 Ford F-150. The procedure on a 2016 F-150 would be identical.
view full answer... - Side Mount Truck Bed Ladder Rack Recommendation for 2016 F-150 Supercrew I have a very similar rack that is a fit for your 2016 Ford F-150, but the Erickson you mentioned is not a fit. Instead we have the DeeZee kit part # DZ95053 which is a fit and would work well. This fits all cab styles and bed lengths as well.
view full answer... - Steel Side Mount Ladder Rack Recommendation For A 2022 Chevrolet Silverado 2500For your 2022 Chevrolet Silverado 2500, we have the: -DeeZee Customizable Truck Bed Ladder Rack with Tie-Downs # DZ95053. This rack is made from 1/8" steel tubing, that has a nice black powder coat finish, is capable of supporting up to 200lbs, and also includes two hook and loop tie down straps for securing your cargo. This rack will fit onto 6-3/4' (standard) and 8' truck beds. I have included a review video for you to check out as well.
view full answer...
Do you have a question about this Ladder Rack?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Test Fit:
Zack K
Written by:
Tricia G
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Alex H
Video by:
Kathleen M
Video by:
Jonathan Y
Video Edited:
Chris R
Installed by:
Shane H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Eddiecamp
3/24/2022
Still doing the job they were purchased for.