WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front and Rear Set
Item # WT110006-120006
Our Price: $171.90
Confirmed to Fit
2001 Chevrolet Silverado
non-Dually without fender flares
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
- All Info
- Reviews (1380)
- Q & A (0)
- Videos (2)
- Photos
2001 Chevrolet Silverado - WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front and Rear Set
- Custom Width
- Custom Fit
- WeatherTech
- Plastic
- Front and Rear Set
- Wheel Well Mount
- No-Drill Install
These premium mud flaps are easy to install and digitally designed for a perfect fit. Protect your Chevrolet Silverado and your trailer from road debris. Flaps are constructed of durable thermoplastic resin with stainless steel fasteners.
Features:
- Install easily
- No drilling or tire removal
- Attach securely with "Quick-Turn" stainless steel fasteners
- Molded from high-quality thermoplastic resin
- Contoured digitally to fit your vehicle
- Protect your vehicle, your trailer and other motorists from dirt and debris
- Quantity: 2 front flaps and 2 rear flaps
- Made in USA
Precision fit, durable components and ease of installation make WeatherTech NoDrills your first choice in mud flaps. Installing mud flaps has never been this painless. Patent-pending QuickTurn stainless steel fasteners makes installation quick and easy - no drilling required.
110006 and 120006 WeatherTech No-Drill, DigitalFit Mud Flap - Front and Rear Set
Installation Details
Alternate Instructions
Video of WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front and Rear Set
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for WeatherTech Front and Rear Mud Flap Installation - 2002 Chevrolet Silverado
Today on our 202cs, we'll be installing the WeatherTech easy-install, no-drill mud flaps for the front and rear, part number WT110006-120006. We'll begin on the driver's front. We'll need to go ahead and remove a couple of the plastic fasteners that hold the inner fender liner in. You can do this by either using a flat head screwdriver. Or if you happen to have an auto fastener removal tool, that works, too. There are also two holes in the actual fender that have nothing in it before you started, that will get two plastic push rivets pushed into them.
To begin with, you'll go ahead and hold the mud flap up, lining up the four holes. You'll go ahead and take two of the push pin rivets that are supplied with the kit, and put them in the two holes that go into the metal part of the fender. Next, you will use the rivet that you took out of the center hole. You'll need to reinstall that back into the middle hole on the mud flap. Now for the bottom hole, you will go ahead and take a screw and push it through.
You will need to put the locking nut on the back side of it. Now we'll need to go ahead and push all of our push rivets in. you will need to go ahead and tighten down the bolt with the use of a Phillips head screwdriver, and a wrench on the back side. That's all there is to installing the front mud flap. Now we'll go ahead and repeat the same process for the passenger side.
With our front two flaps on, let's move to the rear driver's side. We'll hold it up there, lining up the two holes that are part of the fender. Then we'll go ahead and put a washer on one of the Phillips head screws, and push it through the hole that lines up on the top. With that held in place, we'll go ahead and put a flange nut on the back side. We'll go ahead and just loosely tighten them for now.
Then we'll do the next hole down, making sure that that one lines up. Again, a Phillips head screw, a washer, followed by a flange nut on the back side of the fender. Once you have that in place, you can go ahead and tighten down these two. Now that you've got the two sets of hardware installed, we need to go ahead and turn the QuickTurn fastener, and make sure that it's securely locked in place. As you will notice, the edge of it will catch the edge of the rear fender. Once you have it locked into place, we'll use the supplied Allen key to tighten it down. Now that we've completed the driver's side, we'll go ahead and move over to the passenger side, completing the same process. And that completes the install of the WeatherTech easy-install, no-drill mud flaps for the front and rear, part number WT110006-120006, on our 2002 Chevy Silverado.
Customer Satisfaction Score:
73% were satisfied with this product
27% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front and Rear Set - WT110006-120006
Average Customer Rating: 4.8 out of 5 stars (1380 Customer Reviews)
These premium mud flaps are easy to install and digitally designed for a perfect fit. Protect your vehicle and your trailer from road debris. Flaps are constructed of durable thermoplastic resin with stainless steel fasteners.by: Richard 04/14/2024
2001 GMC Yukon
Fantastic product. Very easy installation. High quality. Very fast delivery! Etrailer is the best as always!
by: Jan02/05/2020
Very pleased with our order. The first one wasn't right, but you were so helpful, happy , and made it very easy to return it and help me find the right one for our need. Refund was quick. We're very happy with this company and will use it again.
by: James M10/13/2017
Great product.would recommend it.
by: Greg L.11/26/2014
Install fairly easy, snow today, still on vehicle, did the job.
by: Gerald 10/29/2021
2007 GMC Sierra Classic
by: Thomas 03/19/2023
by: Karen04/06/2024
Just like the description says...easy install, no drill, digital fit. Looks like they came with the truck. Highly recommend.
by: Jeff in WA12/20/2023
Did not fit well on the 2022 Dodge Ram 3500. The rear flaps did not quite fit the OEM fender flares on the vehicle. Too tight - not enough clearance to sit nicely against the flares. There was also no hole for the trim fastener so had to drill a 1/4" hole for little plastic fastener - not a big deal. Hoping the front ones fit better, but they were worse. Same story - the "digital fit" flaps did not fit the OEM fender flares. Tried a heat gun to hopefully warm the flap and maybe get them to fit together better, but couldn't quite get it. I'll need to get some longer fasteners, otherwise one bolt and the little plastic tab are all thats holding it on. Maybe if the weather warms a bit...? Def not as advertised.
by: Ray02/21/2024
holes did not line up with pre existing holes on car
for installation. Very hard
to install. will NOT buy weathertec again
by: Debra07/21/2020
Delivery was quick. The mudflaps were very easy to install it took me about 15 minutes. Extremely happy with the way they look and no more rocks and debris flying up from my tires. Definitely recommend.
by: Thomas09/05/2020
Look great! Look OEM. Wish all the hardware was black. And in the front the two screws you pull out both sides, trash go get something a little longer and more girth. etrailer was great the arrived earlier then expected.
by: Gary03/22/2024
These mud flaps are great! Good Instructions and install went quickly. They look really good and should perform well, protecting the rocker panels and the side steps from mud and stones. Very pricey but good quality. Front Pair.
by: Scott 01/20/2024
Took a little effort to get it to match up with the plastic wheel well fender flares but once I did I have not had any issues. Looks somewhat subtle but is pretty effective at stopping thrown debris onto the paint.
by: Jason 12/01/2022
Great service item was shipped and received quickly. Mud flaps were easy to install.
by: Joel 01/27/2024
For someone who is "old school" and reluctant to install plastic onto a machine, I'm impressed with the ease of installation and durability so far. I've put about 7500 miles on them without an issue. And thanks to Etrailer for carrying great products and providing great info to consumers. You folks have a great Business model!
by: Anthony Daversa08/26/2023
I was apprehensive about buying these as the weather tech company said they would not fit. My vehicle has power running boards and 22” wheels..I researched forums and took a chance. They fit…no problem. See attached photos and video.
Thanks
by: Garry 03/13/2024
Great product, easy to install, I didn't find the instructions, but was easy to figure out. I would recommend this product
by: FBerg12/16/2020
This is a good investment. First, etrailer is a great place to get what you need for supplies! The weathertech mud flaps are a great addition to a raised F-250 with larger tires that pulls. This will provide the rest of the protection I need as well as cut down on debris that the tires throw up at other cars/trucks. Very easy to install and if I want to remove them then I have all the pieces necessary except for the push grommets which I can get anywhere. I think I will leave them on for a while....not bad looking either.
by: William 02/04/2024
East install on 2023 Thor Compass 23te Motorhome. Fit perfectly. Place some tape on a open end wrench to hole the nut on and you are good to go.
by: David 02/28/2024
Weather tech always fits and looks good
by: Don 04/08/2023
Good quality. Arrived quickly
Easy to install.
by: RobertWV08/17/2023
Fit my 2020 Honda Ridgeline perfect! Easy to install with easy to follow instructions. Match oem black plastic great. Really complete the look of truck. Very happy customer.
by: Bob D.03/16/2017
I ordered Weather Tech mud flaps for my GMC Sierra 1500. The front flaps were easy to install by using existing fasteners installed on the truck by GMC. The rear flaps were slightly more challenging requiring the placement of clamps (integral to the flaps) on the rear fender. The entire installation of all flaps required about 45 minutes. they look great and they will protect my fenders from being damaged by road debris.
by: David10/02/2022
I ordered a set of weathertech no drill mud flaps for my new 2022 Colorado and they fit great and easy to install. Well after a couple of weeks I put on GM flares so I had to order another set for flares. Same thing excellent fit and easy install. Quick shipping and good service.
by: Mike02/22/2018
Seems like a solid product. Made in the USA. The instructions were a bit off. So I jumped on the etrailer YouTube account, found the install video. Issue solved. I will say I'm more impressed with etrailer than weathertech. However, nice fit and finish. I would recommend this product.
25
1342
Show More Reviews
See what our Experts say about this WeatherTech Mud Flaps
- Will WeatherTech Mud Flaps # WT110006-120006 Fit 2001 GMC Yukon XL With Factory Running BoardsI contacted our representative at WeatherTech and he informed me that the item you selected, WeatherTech Mud Flap 4-Piece Set, part # WT110006-120006, will fit your 2001 GMC Yukon XL with factory running boards. He informed me that running boards are not an issue for part # WT110006-120006, to fit. Part # WT110006-120006, will only work on your 2001 GMC Yukon XL if you do not have the factory fender flare or fender trim. If your vehicle has the factory fender flare or trim, you will...
view full answer... - WeatherTech Mud Flap Recommendations for a 2002 Chevy Suburban with Factory Running BoardsAs long as you do not have fender flares on your 2002 Chevy Suburban the WeatherTech Mud Flaps # WT110006-120006 would be the correct mudflaps for your vehicle. Our contact at Weather Tech informed us that the running boards on your vehicle will not be an issue for installing these mudflaps. If you do have fender flares on your vehicle you would want WeatherTech Mud Flaps, part # WT110005, which is the front set of mud flaps. There is not a rear pair of mud flaps available for your vehicle...
view full answer... - How To Tell If a 2003 Chevrolet Silverado Has Factory-Installed Fender FlaresA factory fender flare is trim placed around the outside of the wheel well to both protect the vehicle from grime and road debris and enhance the vehicles appearance. I have added a typical photo of what fender flares look like. The WeatherTech Mud Flaps # WT110005-120005 you referenced are compatible with your 2003 Chevrolet Silverado if they have the factory fender flares. I have provided links to the installation instructions for these mud flaps. If your truck does not have the fender...
view full answer...
Do you have a question about this Mud Flap?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Reno H
Expert Research:
Jameson C
Video Edited:
Dustin K
Installed by:
Randy B
Updated by:
Matthew S
Video by:
Zach D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.