Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount - Black - 59" Bars
Item # Y02-490B
Our Price: $545.75
Confirmed to Fit
1980 GMC C/K Series Pickup
Extended Cab
Regular Cab
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (3277)
- Q & A (0)
- Photos
1980 GMC C/K Series Pickup - Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount - Black - 59" Bars
- Camper Shell Systems
- Aero Bars
- Rhino Rack
- Black
- Overhang
Adapt your camper shell, hard tonneau, or hardtop resin roof to carry gear with this roof-rack system. Locking, Quick Mount legs mount to tracks. Black, Vortex Aero crossbars accommodate clamp-on and channel-mount gear.
Features:
- Adjustable roof-rack system lets you carry gear on camper shells, hard tonneaus, or hardtop resin roofs without headliners
- 2 RTC-style tracks with dual C-channels provide adjustable mounting points for roof-rack legs
- Tracks mount to your vehicle roof with T-bolts - some drilling required
- Stainless steel construction with an anti-corrosion coating
- Endcaps provide finished look for the tracks
- 4 Quick Mount legs mount in the channels of tracks to create mounting points for crossbars
- Durable, glass-reinforced nylon construction
- Quick-release trigger system allows for easy, tool-free installation
- Squeeze internal triggers to release legs from bases
- Slide triggers apart to secure legs to bases
- Bases remain mounted to tracks
- Locks in covers let you secure the system to your vehicle
- Pivoting bases offer 33 degrees of adjustment to help level crossbars
- Precision-molded inserts cover bases when the legs are removed
- 2 Vortex Aero black, elliptical crossbars hold ladder racks, conduit cases and other work accessories
- Bars mount to roof-rack legs using built-in channels on bottoms of bars
- Lightweight, structural-grade, extruded aluminum construction for strength, durability and maximum carrying capability
- Built-in C-channel on top of each bar lets you mount Rhino-Rack accessories and carriers
- Rubber strips in the channels help to cushion load and provide slip resistance
- Can be cut to accommodate track-mounted accessories and carriers
Specs:
- Weight capacity: 220 lbs
- Always observe your vehicle's maximum roof load capacity
- Track length: 63"
- Crossbar dimensions: 59" long x 3-1/2" wide x 1-1/2" tall
- Bolt length: 1-3/8"
- Leg height: 3"
- Limited lifetime warranty
The bases of these Rhino Rack legs easily mount into the included Rhino-Rack RTC-style roof rack tracks with included hardware. Just slide the nuts into the tracks, line up the mounting plates, and bolt the bases down. After this initial setup, you can leave the bases in the tracks.
Molded inserts help keep out dirt and provide a finished look when there are no legs and crossbars installed. To install a leg, simply remove the insert.
Once you've set up the bases, installing and removing your roof rack is easy. The Quick Mount legs have an integrated trigger system that creates an easy, tool-free installation.
To install a leg in a base, pinch and slide the internal triggers together.
Lower the leg onto the base and slide the internal triggers apart to secure the leg in the base.
Once the leg is installed in the base, replace the cover and lock it to help secure the system to your roof.
Y02-490B Rhino-Rack Roof Rack System w/ 2 Aero Crossbars - Track Mount - Black - 59" Long
Installation Details
Alternate Instructions
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount - Black - 59" Bars - Y02-490B
Average Customer Rating: 4.7 out of 5 stars (3277 Customer Reviews)
Adapt your camper shell, hard tonneau, or hardtop resin roof to carry gear with this roof-rack system. Locking, Quick Mount legs mount to tracks. Black, Vortex Aero crossbars accommodate clamp-on and channel-mount gear.by: Bill L.06/19/2018
2016 Jeep Wrangler
I purchased this rack system for my 2016 Jeep Wrangler Willy's Wheeler edition - 2 door! There are lots of products out there that are listed for the 4 door but the two door model is more difficult to shop for.
The racks shipped immediately and were here in just a few days. All the parts were there, properly labeled and provided with clear instructions.
To properly fit my small roof, I took the two roof rails to a local machine shop and had them cut them to exactly 35.5". This allowed me to mount the tracks in the outermost groove on the roof and gave me the greatest possible length.
One problem that I had (and had predicted) is that the inside of the Jeep roof has a lip on the inside that interferes with the provided knobs seating properly against the inside of the roof. The local hardware store had no nuts (NOTHING) that would fit the threads of the provided T-Bolts. I ended up temporarily using solid metal spacers to fill the gap and allow me to tighten the provided knobs against the spacer which is against a rubber gasket and then the inner roof!
It worked! In the meantime, I will continue to search for some safety nuts that will fit the Rhino provided T-Bolts.
The rack looks great, is solid as a rock and easy to put on and remove! Now I can comfortably carry our kayaks and/or paddle boards to the lake!
by: Matthew07/24/2023
2002 Ford F-250 Super Duty
The rack itself is really nice, but the QC on the packaging is lacking. Mine showed up missing 4 o-rings to seal the t bolts through the roof. And there was no included Security Allan wrench for the security bolts. So I had to go buy new hardware. For what this kit cost I should have had extras of these parts not had to go spend more money just so I could complete the install. So if you plan to or do purchase this or any Rhino-rack product I would suggest opening everything up well before you plan to install and verifying you have everything that is needed. Other wise the rack looks and works great.
by: Kevin 06/25/2022
Ford F-250 Super Duty
I installed this rack on my F-250 bed cap. The install went smooth. I did it completely by myself with a lot of ladder repositioning. Very happy with the quality of the rack. I’m able to get three full size bikes on top of the cap and free up a ton of cargo space for long trips with our travel trailer.
Kevin
6/28/2023
Still holding up strong. I store it inside in the winter. Re-installs in minutes
by: Andy04/18/2018
2012 Ford F-150
This Rhino Rack roof rack system worked out very well for me. I installed it myself and took my time doing it. The rack system will work great with my RTT. It's easy to adjust and looks great on truck.
For the installation, I decided to use a center line down the middle of my canopy (shell) as my reference point for all measurements. I simply identified the middle of the third brake light on the shell and the third brake light on the back of the cab. I then snapped a chalk line from those points to mark the middle of the canopy. This method worked out great and the rails are perfectly parallel to each other.
The folks at etrailer.com were especially helpful. I had a slight glitch with a minor part in the kit and Bill at e-trailer got it resolved very quickly. He even followed up by calling me directly to give me an update. Truly exceptional customer service. Thanks to all at etrailer. They will definitely get more of my business.
by: Dan Thompson10/05/2017
1998 Dodge Ram Pickup
The Rhino T-Load Hitch and Vortex Aero roof rack system are very well designed, strong and straightforward installations. We have a Hobie Tandem Island sailing kayak, 18.5' long and around 200 lbs. on the roof racks / T-hitch, it is very solid. The T-hitch assembled in 15 minutes. Had my neighbors, both engineers, not come over to "help" with the roof rack install it would have been done in an hour. Lesson learned, keep the software developers over in their yard during install, away from power tools, no drilling allowed. Rhino systems and support staff are outstanding. Definitely recommend these products and the company.
by: Ronnie03/07/2021
Bought this a few weeks ago and finally got around to installing it yesterday. Overall it is very easy to install. I assembled everything in my shop and set the rails about 1 inch wider that what I actually wanted them to be. Put the whole assembly on the roof the the camper shell and centered using a soft seamstress tape measure. Once centered I marked the holes, i then cut the rails down 3 inches and put it back on the roof. I am real OCD so everything was measured precise and equal. Once I was ready to drill holes I measured everything again and once I got up my nerve I drilled all 16 holes in the roof. I did not use the butyl supplied with the racks, instead I used windshield urethane ( I installed windshield in a previous life). I then lined everything up and installed the rails. Before screwing down I put some large D-rings in place and the tightened the lock nuts. The D-rings will allow me to hang things from them. Now I am just waiting to strap my surfboards to the top and head to the beach.
by: Tyler07/12/2022
2006 Toyota Tundra
My kit is missing the track leg base, cover, and all associated mounting hardware. Customer service cannot confirm expedited shipping for the missing parts. A little quality control goes a long way. I mounted the tracks in one afternoon, but will have to wait to mount the bars and my GEAR!
by: Larry05/02/2020
2011 Ford F-150
Well engineered and sturdy. Good Directions but I thought they were a little hard to follow. I used Blue painters tape to hold bottom rails in place and get squared up on topper. I liked the way the bottom rail attaches to the topper. Probably figure on an afternoon to install. Only negative is my topper is 63 inches. Bottom rails were 63 inches. The end plugs stuck out three inches overlap. I cut them off. To Make this work, you need perfect 90 degree corners. My topper has curves so could not come in exactly 15 mm (why Metric) from end. So could not attach end plugs as directed. This will work well with my Porta Bote.
by: Eric06/18/2021
This product was exactly what I was looking for and suited my needs perfectly. The whole system is very well made and you can tell they paid attention to detail and functionality. Shipping was extremely quick and it was in perfect condition when it arrived. I really appreciate the fact that it's easily adjustable and removable. It came with 3 sets of instructions due to the mix of components, but they were concise and clear with good illustration.
by: Mike09/22/2021
2007 Toyota Tacoma
UPS delivered package broken and all hardware missing ... some extra taping would have solved the problem ... Have a hold now on the cc billing ... Shipping dept needs some training ...
Sierra K.
10/4/2021
I apologize for the missing hardware. Customer Service will be reaching out.
by: Lee 05/22/2023
Perfect for our needs. We have two of these racks on our work trucks and are about to purchase a third. The best feature for us is that the cross bars can be removed and stored. We only need to use the racks for a couple handful of jobs a year, so being able to take the racks on & off easy is a big plus.
by: Evelio05/06/2021
2021 Chevrolet Colorado
It’s a great product nice and sturdy. I use it to clear out my pick ups trunk to hang my fishing rods on the bars gives me more room to put in the bed of the pick up. I use the ski carrier to Carry my rods it’s just awesome
by: Joe 09/06/2022
Very good product, I've had no issues with it.
Joe G.
9/7/2023
It has been a good year with no problems. The rack is in great shape and still easy to use.
Mike L.
10/31/2023
@JoeG We're glad to hear that your # Y02-490B Rhino-Rack camper shell rack is working well for you, thanks for getting back with us!!
by: Brett06/29/2018
2012 Chevrolet Silverado
Pretty easy to install with the excellent video provided. If you follow the video, it’s a breeze! Excellent product!
by: Tony 03/11/2023
Great rack! When compared to the bigger name brands this is a fantastic value!
by: John06/12/2022
We absolutely love this rack. I installed it myself on an ARE topper to carry my 2 kayaks. It does it very well. It was recommended by a guy that I had just met. He had the same feelings for it as I do now.
by: Tor08/24/2018
2017 Toyota Tundra
So far so good. I paid a professional (camper shell place) to install it and it took them a bit over an hour to do so. Looks great and I'm confident it will do the job. Whistling noise at speeds above 40 or so, but I have yet removed the crossbars - assuming it will be quieter when I do so.
Mike L.
8/25/2018
Any time equipment is installed on the top of a vehicle, a certain amount of wind noise is unavoidable. You can minimize this by ensuring that the rubber strips are fully in place on the top and bottom surface of the crossbars. If any of the channel is exposed, the crossbar will be noisier. A fairing like part # RRRF4 would also further minimize the noise-causing turbulence.
Helpful Links
by: rbw10/04/2022
Great roof rack. Solid mount. Relatively easy to lock and move if necessary (easier would sacrifice its strength)
by: Bryan D.07/24/2018
2015 GMC Sierra
Product is installed on 2015 GMC Sierra extended cab with a fiberglass A.R.E. bed cap (6.5' bed). System works well and the bars are strong and solid. The cross-bars and risers can be removed quickly and easily (with the proper key) leaving only the pads clamped in place on the rails. Cross-bars and risers can be installed on the pads very quickly. Installation was straightforward and easy, except for the rubber strips that fill the grooves in the crossbars - those were the most difficult part of the installation - to get those to seat correctly (so I lowered rating by 1 star).
by: Drew S.08/29/2017
Nice quality product and I like how it attaches to the vehicle. It was easy to install. The unexpected downside is, these racks are slightly large diameter than those by Yakima. I own 4 or 5 Yakima accessories that I just assumed would mount on these as well, but none of them fit and there don't seem to be any adapters that will work.
by: Jim02/07/2019
2015 Ford F-150
Rack is very high quality. Quiet ride at all speeds. Installation video extremely helpful. The only issue I encountered was that the mounting bolts were bearly long enough to get through thickness of truck cap. I had to remove plastic thumb nuts and use thin fender washers to make it work. Very stressful situation after drilling 12 holes in my cap! These bolts need to be longer to allow for different thickness in caps. Otherwise, very satisfied with this rack.
by: John08/23/2018
2017 Ford F-350 Super Duty
This may very well be a great product when it comes to its functionality, but the installation was fraught with problems. 1). There were two sets of instructions in box, but the materials list only applies to one of the sets of instructions. Thankfully I counted the hardware before I started drilling the holes. Unfortunately, I didn’t count the o-rings. First trip to the hardware store.
2). I finish drilling the holes and place the track onto my truck cap, get into the bed of the truck and start the t-nuts. And half of the t-nuts won’t thread onto the t-bolts. I look closely at the two t-nuts I have left over and notice casting slag literally covering most of the threads. Back to the hardware store for a thread die to clean the threads.
by: Gary05/25/2022
Good solid roofrack! I carry a 20 foot long sea kayak on it.Easy to install,works with all accessories from other rack systems. As good or better than Yakima, Thule ect.
by: Rick 09/13/2022
Fairly easy to install. Happy with the construction. Need to be careful aligning the 2 sides so they are exactly the same distance apart from front to back. 1/4" drill bit worked just fine.
by: Jaemin10/12/2021
2018 Toyota Tacoma
Great racks! I installed them directly onto the roof of my camper shell. The install is pretty easy if you're a decent handy man - I had to drill 16 holes, the hardest part was making sure the tracks were parallel. I put painters tape on the roof of the car and marked lines and holes on the tape. The racks cause a slight whistle while on the freeway but only noticeable because I was listening for it.
25
3139
Show More Reviews
See what our Experts say about this Rhino Rack Roof Rack
- Recommended Roof Rack for Camper Shell with TracksIn order to add a roof rack to a camper shell we usually just recommend the Rhino-Rack Aero Bar Roof Rack for Camper Shells part # Y02-490B since it's a complete kit that comes with everything you need including the rails and aero crossbars. If you already have rails that you want to reuse, you might be able to use the Rhino-Rack Roof Rack for Factory Tracks part # Y02-490B-NT. The roof tracks are usually a pretty standard size in regards to the channel size so you shouldn't have many issues...
view full answer... - Roof Rack and Kayak Carrier for 2002 Class C Winnebago Spirit 24 RVRoof racks are not super popular for Class C motorhomes like your 2002 Winnebago Spirit 24 but I do have a great option that will work really well with the Rhino-Rack System with Aero Crossbars # Y02-490B. This rack will install by first having a track mount to the roof of the motorhome that will then allow you to install a set of sliding aero crossbars. Then for a kayak carrier you could use Thule DockGrip part # TH895 which will fit these bars well and easily give you a way to carry...
view full answer... - Can Rhino Rack Batwing Awning Install on 5 by 8 Enclosed TrailerThe Rhino Rack Batwing part # RR33200 requires a set of crossbars that run left to right with channels on the top of them to install so to install this on an enclosed trailer you'd need to install a roof rack on your trailer like the Rhino Rack Aero Bar Rack for camper shells part # Y02-490B and you'd be set.
view full answer... - Is There a Track Mounted Roof Rack that Fits 2000 Volkswagen EurovanSince you said you are okay with drilling into the roof of your 2000 Volkswagen Eurovan you could use the Rhino Rack Aero Bar Roof Rack # Y02-490B which would give you a set of tracks you can install on the roof of your Eurovan and a set of aero shaped crossbars.
view full answer... - How Is Rhino-Rack Roof Rack System Installed On Camper ShellThe Rhino-Rack Roof Rack System, part # Y02-490B attaches to the included tracks by using T-bolts and drilling into your camper shell roof. This system will work with camper shells, hard tonneaus or hardtop resin roofs without headliners. The legs included with this system attach to the tracks with the included barrel nuts, and can be moved inside the tracks to accommodate different loads. This system includes 63 inch tracks for each side of the camper shell and 59 inch long Aero silver...
view full answer... - Roof Rack Recommendation for a 2005 Ford F-250 Super DutyI recommend installing the Rhino-Rack Aero Bar Roof Rack # Y02-490B on your 2005 Ford F-250 Super Duty. This installs on tracks so you're able to adjust the crossbar spread as needed but it does require you to drill into the roof of your truck. While this may seem daunting, it's the only option available for your truck and once it's installed it can accommodate a wide variety of applications. Attached are the installation instructions for you to check out.
view full answer... - Recommended Sliding Rhino-Rack Roof Rack for Leer Cap on a 2016 Toyota TacomaThe 59" rails that come with the Rhino-Rack Roof Rack System w/ 2 Vortex Aero Crossbars # Y02-490B that you referenced can be cut to length according to your needs with your 2016 Toyota Tacoma. However, I do recommend going with the part # Y02-480B instead which is the exact same kit just with 54" long rails instead. I went out to the warehouse and found that the rubber pieces at the ends of the rails measure about 2-1/2" so even though the usable part of the rails measures 54" they will...
view full answer... - How to Use Yakima LoadWarrior Cargo Basket On Ford Ranger Camper ShellThe Yakima LoadWarrior Cargo Basket # Y07070 that you referenced is designed to mount to roof rack crossbars. In order to use this basket on the camper shell for your Ford Ranger, I recommend installing the Rhino-Rack Roof Rack System # Y02-490B. This system is designed specifically for camper shells like what you have and will provide you with an adjustable roof rack that will let you easily mount the LoadWarrior and other accessories or cargo. It features RTC-style tracks that will mount...
view full answer... - Can the Track on the Rhino-Rack Aero Bar Roof Rack for Camper Shells Be Trimmed for a 5' BedThe track on the Rhino-Rack Aero Bar Roof Rack for Camper Shells # Y02-490B can be cut down to the size you need. But, the crossbars cannot be cut. That being said, you should not need to trim down the crossbars. It is also important to note that the wider slot on whichever end is trimmed will be gone, so installation and removal of the crossbars would need to be from the untrimmed edge. You could also use the Rhino-Rack Roof Rack for Factory Tracks # Y02-490B-NT (59") with shorter tracks,...
view full answer... - Recommended Crossbars for a 2009 Chevrolet Silverado Regular Cab With a Naked RoofSince you have a regular cab (single cab) the Rhino-Rack Vortex Aero Crossbars # RRVA137B-2 with the Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars # RRRLKVA will not work. These feet are only going to work with the crew cab and extended cab models. Instead, you'd want to use something the Rhino-Rack Aero Bar Roof Rack for Camper Shell # Y02-490B. These crossbars come with two RTC style tracks that'll get mounted to the roof of your vehicle and provide a c-channel for the included...
view full answer... - 2005 Dodge Dakota Crew/Quad Cab Roof Rack RecommendationWe do have some roof rack options that fit the Crew Cab (or Quad Cab) on your 2005 Dodge Dakota, but they will be universal styles that requires some modification to your roof. I recommend the Rhino-Rack Aero Bar Roof Rack # Y02-490B which includes some tracks you drill into your roof. This gives you some adjustability when it comes to the spacing between the crossbars to accommodate varying load sizes. The legs that come with this kit are also easily removed (once unlocked) so you can...
view full answer... - Will The Rhino-Rack Aero Bar Roof Rack For Camper Shells Fit A Leer Truck Topper 100XQ?The Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount - Black - Standard - 59" Long # Y02-490B is a universal roof rack and can be adjusted to fit various camper shells. The track length is 63" on this roof rack but they can be trimmed down to fit a smaller camper shell if need be. Another solution is to use Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 55" Long - Qty 2 # RTC14 which are 55" long tracks. Then you can add Rhino Rack Track Mounted Roof Rack # Y02-490B-NT...
view full answer... - Easiest Way to Carry 2 Kayaks on 2017 Chevy Colorado With Truck CapThe easiest way to carry a couple of 12 foot kayaks with your 2017 Chevy Colorado that has a truck cap is to add a rack system directly to the camper shell. You can do that with a track-mounted rack, each of which comes with tracks that are 63 inches long. You will only need to determine the correct length of crossbars by measuring the width of your Colorado's camper. The right crossbar length is going to be wider than the overall width of the top of the camper shell. The most likely widths...
view full answer... - Roof Racks for Crew Cab and Camper Shell on 2013 Ram 1500 Of all roof rack options for your 2013 Ram 1500 Crew Cab, shown on the linked page, I recommend the Rhino-Rack Vortex Aero rack system consisting of parts # RRVA150B-2, # RRRLKVA and # DK043. This rack is illustrated in the linked review video. This rack is cost-effective and features quieter aerodynamic crossbars for reduced wind noise. For the camper shell you can use the mating track-mount Vortex Aero rack system # Y02-490B. An installation video is linked.
view full answer... - Can Rhino-Rack Aero Bar Roof Rack For Camper Shell be Installed on SnugTop Hi-LinerYes, a SnugTop Hi-Liner camper shell will absolutely allow you to install the Rhino-Rack system, though I recommend measuring the top of the shell to determine the correct length of bars for your truck, as you may need the shorter crossbars since the Hi-Liner doesn't go the full width of the truck bed: - 54" Long Crossbars: Rhino-Rack Aero Bar Roof Rack for Camper Shells # Y02-480B - 59" Long Crossbars: Rhino-Rack Aero Bar Roof Rack for Camper Shells # Y02-490B The Hi-Liner slopes downwards...
view full answer... - What Tracks and Crossbars do You Recommend for an Awning on My Leer XR Camper Shell? We definitely have some great options. However, if you are looking to minimize components on your Leer XR cap on your 2017 Toyota Tundra, we unfortunately do not carry any awning systems that mount directly to tracks. With that being said, we do have awnings that attach directly to crossbars themselves. For the crossbars and tracks, I recommend the Rhino-Rack Aero Bar Roof Rack for Camper Shells - 59" Long # Y02-490B. This system comes with 63 inch tracks that mount to your Leer XR with...
view full answer... - Is a Rhino Rack System With 54 Inch Bars Available?The kit you are looking for is the Rhino-Rack Roof Rack System # Y02-480B. This rack has the 54 inch crossbars you were seeking, and is otherwise exactly the same as the kit with 59 inch crossbars you referenced, # Y02-490B. This system does have locks to secure it to your 2014 Chevy Silverado. I've added a link to a video installation of this rack for you to take a look at.
view full answer... - Recommended Roof Rack And Kayak Loader For Volkswagen Camper VanI found the item you mentioned online. It is exactly what you thought. It is a ladder loader made by Rhino-Rack for the Australian market. The video shows the carrier using a kayak in the loader. We do not offer this loader in the US. I do have a solution that will work for your VW Camper Van. I recommend the Rhino-Rack Roof Rack System, part # Y02-490B and the Inno Kayak Lifter Load Assist # INA453. The # Y02-490B is designed for camper shells and hardtop resin roofs and includes 63-inch...
view full answer... - Roof Rack for Camper Shells on NuCamp T@G TrailerWhile I can't say for sure if anyone has used the Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount - Black - Standard - 59" Long # Y02-490B on a NuCamp T@G camper (I couldn't find anything in our reviews), from what I understand, these campers often come with Yakima round bar roof racks and track systems. So I don't see why it wouldn't work, so long as the 63" track length is the right length for your camper, and the 59" crossbars are wide enough; if so there shouldn't be...
view full answer... - Recommendation for Adding Crossbar System to Leer 750 Sport Fiberglass Tonneau Cover The best solution we have available to add a crossbar system to the Leer 750 Sport fiberglass tonneau cover on your Ford F-150 is with a rail system like the excellent Rhino-Rack # Y02-490B. The included 63" tracks will mount to the tonneau itself (drilling into the cover will be required) and will provide you with the mounting points for the (also included) Quick Mount Legs and 59" long crossbars. This will give you a durable rack with a 220 pound weight capacity and the tracks allow...
view full answer... - Roof Rack System Recommendation for Roof Top Tent on a CamperFor the absolute best option for mounting a roof top tent to your 2014 Runaway Camper, I recommend the Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount - Black - Standard - 59" Long # Y02-490B. Even though this system has a maximum dynamic weight capacity of 220 pounds, Rhino-Rack does not provide a weight rating for the maximum static weight capacity. The static weight capacity is the maximum rating the rack can support when the vehicle and camper are not in motion. In order...
view full answer... - Recommended Roof Rack and Kayak Carrier for Camper Shell on 2008 Toyota TundraTo install a roof rack onto the camper shell of your 2008 Toyota Tundra, I recommend the Rhino-Rack Roof Rack System - Track Mount # Y02-490B. This will include everything that is needed to install a roof rack, including two 59 inch long aero crossbars and two RTC-style tracks with dual C-channels that will allow for adjustable mounting points for the roof rack legs. Keep in mind that drilling into the camper shell is required to attach the tracks. This rack has a weight capacity of 220...
view full answer... - Parts Needed To Install Rhino-Rack Roof Rack Onto The Bed Rails Of 2017 Ford F250 Super CabYou can certainly install Rhino-Rack crossbars onto the bed rails of your 2017 Ford F-250 Super Cab, however, this will require some drilling. You could look into the Rhino-Rack Aero Bar Roof Rack 54" # Y02-480B, or you could go with the 59" version # Y02-490B. The weight capacity for this system is 220lbs. For an option that does not require any drilling and also has a higher 500lb weight capacity, I recommend looking into the Adarac M-Series Ladder Rack # AD96FR or Adarac Pro Series...
view full answer... - Track Mount vs. Fixed Mount Rack For Tonneau Cover on 2021 Ford F-150Those are good questions, and you will indeed lose quite a bit of functionality going with a fixed rack system compared to a track mounted rack. The reason for that is simply that you'll have the ability to move the crossbars to accommodate whatever it is you need to carry, and depending on what that accessory may be, it won't be able to mount unless your crossbars have a specific spread distance. There is not a desired optimum spacing, that is completely up to you and what you are looking...
view full answer...
Do you have a question about this Roof Rack?
Rhino Rack Accessories
Fit to this rack on your 1980 GMC C/K Series Pickup
Info for this part was:
Written by:
Tyler C
Updated by:
DeAnne T
Updated by:
Lisa S
Updated by:
Wilson B
Updated by:
Daron K
Updated by:
Alex H
Updated by:
Noah M
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Jacob T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
7/27/2023
Of course it should come with all the hardware that is needed. I know that you purchased what you needed however I will still have our Customer Service team get in touch.