Timbren’s rear-axle SES kits replace your OEM bump stops and provide additional support to your vehicle’s suspension
Often when towing a trailer or hauling heavy loads in your bed, the rear end of your vehicle will sag, causing your traction, steering and braking to be negatively affected.
But the resistance from Timbren's SES kits work with your factory suspension to keep your vehicle level and improve your driving experience.
Timbren Aeon springs absorb a substantial amount of road shock, creating a smoother, more stable ride. Each spring is activated when it is needed, so body roll and sway are greatly reduced.
COMMON APPLICATIONS
Hauling
Campers
& Trailers
Heavy
Truck Bed
Loads
Slide-In
Campers
REVIEWS
What People Think
1 Year Later
I had these on my Tacoma and liked the way they worked so much that I got a set for my new to me Tundra. You don't notice anything until you put a load on the truck. Then you feel more stable under load and don't have to worry as much about the leaf springs. The install was done in 15 minutes.
I pull a 20 ft car hauler with the Tundra and recently hauled a car to Arizona then hauled another back. The frame just touches the top of the Timbren when loaded. After 3,000 miles of driving I am even more convinced that this is a great product. The truck never squats from trailer load and the Timbren also keeps the ride smooth straight and steady when pulling a load. When unloaded there is about a one inch gap between the frame and the Timbren so it drives like stock when lightly loaded or unloaded.
By: Lance
Vehicle: Toyota Tundra
Arrived a couple days early, great!
All parts included, super easy to put together and install. No more than a couple of minutes to install on each side of the truck. Perfect Fit! Your installation videos were very helpful. Extremely pleased wit the quality of the product and service from etrailer.
After installation hooked up my 32 ft Weekend Warrior toy hauler with 150 gallons of water and full load, no sag. Everything level now with our hitch at the correct height. Outstanding product!
By: William
Vehicle: Ford F-350 Super Duty
Great Product!
I had some body sway, and a little sag when loaded heavy in my F-350. I have a steel flat bed so my pickup is not empty when its empty, these fixed my issue of it being squishy till the factory overloads kicked in.
Made the ride solid and firm, exactly what I was looking for. Makes corners great again for a heavy duty pickup, only thing a person may want to consider is if you have a heavy bed or loaded with tools, you’ll have to pick up the rear end to unload the springs enough to slip the Timbrens on.
Can’t wait to get hooked up to the RV and our dump trailer and see how much better it trailers, especially since it exceeded my expectations empty.
By: Jason
Vehicle: Ford F-350 Super Duty
EASY INSTALLATION
Timbren's SES kits are much easier to install
than air springs. Air lines, compressors,
and gauges aren’t needed. No drilling or manual adjustments required.
Timbren springs are bolted to the bottom of the bracket and hang down to where the bottom of the spring sits, 1" above the axle. The inch of clearance allows the existing factory suspension to operate normally under light loads and standard terrain, ensuring the smooth, comfortable ride that you are used to.
