Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # 13323
Retail:$250.95
Our Price: $159.21
You Save: $91.74
Confirmed to Fit
2007 Toyota Tacoma
excluding X-Runner
X-Runner
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (355)
- Q & A (0)
- Photos
2007 Toyota Tacoma - Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Class III
- 2 Inch Hitch
- 5000
- Concealed Cross Tube
- CURT
- 500
- 5500 lbs WD GTW
- 550 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your Toyota Tacoma's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 5,000 lbs
- Maximum GTW when used with weight distribution: 5,500 lbs
- Maximum tongue weight: 500 lbs
- Maximum TW when used with weight distribution: 550 lbs
- Maximum gross trailer weight: 5,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13323 Curt Class 3 Trailer Hitch Receiver
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
5,000 lbs.
Tongue Weight (TW):
500 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
5,500 lbs.
Tongue Weight (TW):
550 lbs.
Gross Towing Weight (GTW):
5,000 lbs.
Tongue Weight (TW):
500 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
5,500 lbs.
Tongue Weight (TW):
550 lbs.
Tech Tip
Bumper brackets will need to be loosened and bumper supported during hitch installation. No drilling required for installation , Hitch does not fit vehicles with a factory installed hitch
Complete Towing Package for 2007 Toyota Tacoma
Retail:$378.38
Package Price:$244.52
2007 Toyota Tacoma Owners Who Purchased This Trailer Hitch Also Bought...
Popular Tacoma Trailer Hitch Accessories
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Did not arrive in time
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13323
Average Customer Rating: 4.9 out of 5 stars (355 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: KEVIN MASSEY03/17/2017
2007 Toyota Tacoma
After searching for a hitch , i found this product from etrailer. This trailer hitch was very reasonably priced and the shipment was very fast. After receiving the hitch, it only took about 30 minutes to install. This product is extremely well built. The welds are excellent, and i especially like the tow hook rings. I use this truck for a landscaping trailer and fishing boat.
Great product was a great company .
THANKS
by: Ron C.07/24/2012
Excellent product and superior service! It arrived in a couple of days and
an easy install.
Here is a helpful hint. To support the bumper I used two cargo straps (the
kind with no hooks). With the tailgate open drop the non buckle end between
the tailgate and body. Close the tailgate and wrap the straps under and
around the bumper and tailgate. Tighten them and the bumper is supported
with nothing in your way! Pretty slick, see attached photos
Keithmj
1/24/2015
Thanks for the tip on keeping the bumper up. It looks like a good way to do it. I will use this way when I install mine. Did you need help holding the hitch in place?
by: Craig G10/25/2015
2015 Toyota Tacoma
I received the hitch and it looked good. I took it out the box it came in. Went to install it and noticed one of the sides was bent in, this probably happened during shipping. I used a rubbed mallet to beat the side back out to get it to fit up against the bed rails. Other than that the installation was simple and easy.
Craig G.
11/1/2016
It works well. I haven’t had any problems with it Knock on wood The only problem I had was when I first got it and it was bent a little bit but I was able to straighten it and get it on.
by: Timothy 09/16/2023
2010 Toyota Tacoma
Received the package and noticed that the contents had shifted creating a hole through the cardboard. The hitch, hardware and wiring harness appear to be ok. Until the hirch is installed i really won't know if there are any issues.
The hitch and harness look we made.
by: Works like a charm01/05/2014
2006 Toyota Tacoma
I installed the following on a 2006 Toyota Tacoma PreRunner. Watching all the related etrailer installation videos will give you an excellent idea of what to expect. Having an extra pair of hands removing the rear bumper and installing the hitch is a must. I admit it would have been nice to have a lift and impact wrench. ;) Otherwise pretty straight forward. The wiring harness and mounting brackets were just as simple. Again, just follow all the etrailer videos. See photo 1 for finished install. Sorry for the poor quality pic.
Works like a charm. I'm satisfied!
Side note: I used the longer receiver mounting bracket (18136) in conjunction with the 4-Pole Flat mounting bracket(18144). The wire connector is almost even with the back of the receiver tube. See photo 2.
* 13323 - Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
* 118496 - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
* 18136 - No-Drill Mount Bracket, Long
* 18144 - Mounting Bracket 4-Pole Flat
Because I am volunteering to help pull a trailer once a month for a local charity, this particular product definitely made the project a viable solution. The great ratings on this hitch, price, and turn around time on shipping were an obvious plus. I will be keeping etrailer bookmarked for any future towing needs. Wouldn't hesitate recommending etrailer to a friend.
by: Scott 10/07/2023
2006 Toyota Tacoma
Excellent video installation instructions; freaky-fast delivery; solid build. Great stuff!
by: John C.01/11/2012
2012 Toyota Tacoma
When I ordered this trailer hitch for my 2012 Toyota Tacoma from etrailer.com it was expressed mailed free of charge! Three days later, there it was on my front porch! The etrailer video that explains how to install the hitch was easy to understand. Although it's recommended that two people install the hitch, I was able to do it myself using a car jack to hold one end up while I attached the other end. Total installment time by myself was 50 minutes. I was going to have a professional do the wiring, but etrailer makes it so simple that I may do that job myself at a great price!
by: Chad C.08/17/2014
Best part about this hitch is its made in the USA. It went on flawlessly and looks great. The finish is shinny powder coating and the fit is perfect. I also added a 4 pin wiring harness bracket that holds the connector up and out of sight.
by: Tony A.06/08/2020
The quality of this hitch is top notch. Heavy duty, sturdy and well built. The installation instructions made the project very easy to install. This product was a perfect fit and I would definitively buy from this company again. Thanks etrailer and keep up the great work.
by: Ryan03/26/2021
The hitch receiver was taped at the end including to wrappings of paper cardboard around the crossbar. The box was beat up really bad by UPS and resulted a few minor dings and scratches on the crossbar and receiver. Yes, UPS has some responsibility for mishandling the package but etrailer did not pack this well in my opinion.
by: Bill Torres03/22/2011
Wow ..Easy Installation of Trailer Hitch..1 2 3..it was done....needed it for wheelchair lift...for my daughter who has spina bifida...need to haul her around...needed hitch for carrier...Thank you...
by: Camilo Canoa02/08/2017
Installation of this hitch was a breeze! And it can be done by one person! Instruccions were legible and clear and this hitch was cheaper than e*** or a*****! Plus backed by the guarantee im only buying my hitchs from etrailer.com!!
by: Michael04/02/2013
2010 Toyota Tacoma
Exactly what I needed. This hitch and T-connect wiring kit was easy to install and looks great! I highly recommend these products and I will definitely buy from etrailer again!!
by: Kevin 07/22/2023
Fits like a glove! I also was replacing a rusted out bumper and the only additional pieces you may need if you are replacing an original OEM hitch, would be the left and right bumper brackets.
by: Ryan01/13/2012
2009 Toyota Tacoma
I ordered the hitch on Sunday night, and it arrived Wednesday afternoon. Installation was quick and easy, taking me just under an hour to do by myself. I'd order another hitch from and recommend etrailer.com to any of my friends.
by: Ed05/31/2021
Fits like million dollar glove! Easy to install and easy to follow instructions.
by: Daniel S.02/05/2019
2014 Toyota Tacoma
The installation was straightforward, the instructions were very clear. I will definitely be recommending this company to my friends.
by: Ken B01/17/2014
2014 Toyota Tacoma
Curt hitch fit my 2014 Tacoma perfectly .Took just under an hour to install.
by: Butch Davis10/07/2012
2007 Toyota Tacoma
There should be a rating higher than "Excellant" for the two products I bought, trailerhitch and wiring harness....
Both of these were so easy to install I was "blown away" by the ease of installation...
But I do have ONE HUGE suggestion....Either include a CD-ROM for the installations, or at least include something that says go to your web site and watch the videos. Your step-by-step video instructions were awesome. The written directions tell you to removr two bolts and loosen three and then mount the hitch, NO WAY, it's much easier to do it like your video tells you to. I took my laptop out to the garage and watched the video during the install and could pause it and do that step, pause and restart :) :) :) LOVED IT......
But I do have ONE HUGE suggestion....Either include a CD-ROM for the installations, or at least include something that says go to your web site and watch the videos. Your step-by-step video instructions were awesome. The written directions tell you to removr two bolts and loosen three and then mount the hitch, NO WAY, it's much easier to do it like your video tells you to. I took my laptop out to the garage and watched the video during the install and could pause it and do that step, pause and restart :) :) :) LOVED IT......
" />
Butch D.
4/9/2014
Loved the product, the install was so easy...........traded thetruck in on a 2014 Toyota Tacoma in November of 2013........
by: Hillary08/02/2023
2009 Toyota Tacoma
Our first order received was missing two of the parts ordered. Once we received the rest, the pins were missing from it. So all in all the parts are great once installed. The shipping dept. may need some improvement.
by: Tom Assenmacher07/18/2014
2010 Toyota Tacoma
Received the trailer hitch on time. A great product and was easily installed by me. This is my second hitch from E-Trailer (first hitch was for a 2009 Honda CRV), and the service then was great too. Highly recommend E-Trailer - and great installation instructions too!
Tom A.
7/18/2015
Great! No problems at all. Used on my 2010 Toyota Tacoma pickup to tow a 13 Casita travel trailer on a trip from Kinsale, VA to Argentia, Newfoundland Canada! A trip of about 6000 miles. The hitch was very easily installed and the instructions were very thorough. Thanks much!!
by: J.G.11/25/2016
2006 Toyota Tacoma
I bought the Kurt trailer hitch and had it installed on my Toyota Tacoma. Not a problem at all installing it. Fit right in. It has been used to take a sailboat to water five times this year. Great product!
J.g.
11/29/2017
It works perfectly well. Not a hitch forgive the pun!
by: Nic T10/19/2022
2009 Toyota Tacoma
The hitch and suggested wiring harness were a perfect fit for my 2009 Toyota Tacoma. etrailer, as always was, was great to work with. Shipping was very fast and the packaging was excellent!
Well done, etrailer!
by: Alan M.04/23/2011
Excellent paint, excellent fit, easily bolted on with a friends help, and 3 beers....didn't need to remove bumper or any cutting/welding. perfect, perfect, perfect product. start to finish was 1 hour in my driveway.
by: Tom07/19/2021
Great fit, easy install. Be sure to adjust/straighten out the bumper before tightening the bolts.
25
355
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Width of Trailer Hitch Receivers for 2005 Toyota TacomaThere are three trailer hitch receivers that are fits for a 2005 Toyota Tacoma, and according to the manufacturers, from outside-to-outside at the widest points the hitches were approximately 38-1/2 inches wide. That would be the part of the hitch that attaches to the outside of the frame rail, but as you can see from the cut out of the installation instructions, there is a flange on the inside which is about 1/2 inch from the sides. I believe this may be what you were referring to by...
view full answer...
- Hitch Recommendation for a 2015 Toyota TacomaYes, the Curt Hitch part # 13323 that you referenced has been confirmed to fit all models of the 2015 Toyota Tacoma so it would fit yours. I attached an install video for this product for you to check out as well. For trailer wiring you would want the part # C55513. For ball mounts I recommend the etrailer Ball Mount Kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a carrying bag.
view full answer... - Trailer Hitch, Wiring & Related Towing Items for 2012 Toyota TacomaCurt 2-inch Class III hitch # 13323 is a confirmed no-drill hitch fit for your 2012 Toyota Tacoma. This hitch fits both X-Runner and non-X-Runner versions and it includes the hardware you'll use for its bolt-on installation into the truck's existing frame weld nuts. An installation video is linked for you. For a 4-pole trailer wiring harness you can use Curt # C55513 which is a simple plug-and-play installation with no cutting or splicing of wires required, as shown in the linked video. You...
view full answer... - Trailer Hitch Availability for a 2011 Toyota TacomaYes, I checked with Curt and trailer hitch # 13323 is a fit for the 2011 Toyota Tacoma models. To wire your vehicle for towing, you would be able to use custom-fit Tow Ready wiring harness # 118496. To equip your Tacoma for towing a trailer, you would also need a ball mount, a hitch pin, and a hitch ball. The recommended ball mount for your vehicle would be # C45010, which would place the hitch ball at the most common trailer height. To determine whether this would be appropriate for...
view full answer... - Can Curt Hitch 13323 Fit 2010 Toyota Tacoma with OEM HitchThe Curt hitch part # 13323 is not listed as a fit for your 2010 Toyota Tacoma as it does not fit the versions of the truck that have the OEM hitch. That being said I don't see why it would match up to the frame now that the OEM hitch is gone. I would be a little worried that the frame rusted badly as well where this would need to install.
view full answer... - Hitch, Wiring, Brake Controller, and Accessories for a 2010 Toyota TacomaFor your 2010 Toyota Tacoma and hitch, # 13323, the hitch comes with everything you need to install it. Depending on what you want to tow or carry there are some basic accessories that you will need. A draw bar is a good idea if you plan on towing a trailer that has a coupler. Ball Mount, # C45010 will fit in the recommended hitch. Use with hitch ball, # 19247. I also recommend a locking hitch pin, which will deter theft, like the Trailer Hitch Receiver Lock, # e98880. You will also need...
view full answer... - Curt Front and Rear Trailer Hitch Receivers For a 2006 Toyota TacomaThe Curt Trailer Hitch Receiver # 13323 is a rear hitch which fits your 2006 Toyota Tundra. We do carry the Curt Front Mount Trailer Hitch Receiver # 31313 if you are looking for a front hitch. This will require removal of the bumper beam end caps and may require drilling if you are installing on a 2wd truck. If you are needing the rear hitch we do have the T-One Vehicle Wiring Harness # 118496 which will allow you to connect to the factory wiring to get a 4-way flat connector.
view full answer... - Comparing Draw Tite and Curt Hitch for 2006 Toyota TacomaBetween the Draw Tite # 75236 and the Curt # 13323 there isn't a significant difference in ground clearance. They both fit right up to the bottom of the rear bumper. Overall I would go with the Curt though. We have found that typically the quality control is a bit tighter on the Curt hitches and the powdercoat is a little more resilient.
view full answer... - Can Tonneau Cover and Ladder Rack System be Installed on 2005 Toyota Tacoma at the Same TimeUnfortunately all of the ladder racks offered for the 2005 Toyota Tacoma are going to use the inside of the bed rail for installation so this would interfere with a tonneau cover but I may have a solution for you. Take a look at the Erickson Big Bed Load Extender, # EM07600-07601, or Rhino-Rack T-Load Hitch Mounted Load Bar, # RTL002. I have included a picture that demonstrates how this can be used for a ladder. This style of rack will require that your Tacoma be equipped with a 2 inch...
view full answer...
- Recommended Hitch and Wiring for a 2009 Toyota Tacoma TruckFor the 2009 Toyota Tacoma, I recommend the Curt Trailer Hitch Receiver, # 13323. This hitch is designed to custom-fit both the standard Tacoma model and the X-Runner. This hitch is a Class III rated hitch and will have a 2x2 inch receiver hitch opening. Since your Tacoma was not wired with a towing package, then the Curt T-Connector Vehicle Wiring Harness, # C55513, is the wiring kit I recommend. This harness will connect to your vehicle using already existing wiring plugs located in...
view full answer... - How to Determine Rise or Drop for Ball MountYou're right, the information for getting everything correct is pretty overwhelming but you seem to have it down pretty well! In order to determine the correct rise or drop you need for your ball mount, all you have to do is measure from the top of your receiver to the ground and from the bottom of your trailer coupler to the ground and find the difference. You can use the cut outs of the linked help article on "How to Measure for Rise or Drop" I added. For example, the Curt Trailer Hitch...
view full answer...
- 2009 Toyota Tacoma Hitch Installation QuestionThe bumper does not need to be removed when installing the Curt Trailer Hitch Receiver - Custom Fit - Class III part # 13323 on a 2009 Toyota Tacoma, but three of the bolts that hold the bumper in place will need to be loosened and two will need to be removed in order to properly mount the hitch. The loosened bolts will be re-tightened and the removed bolts will be replaced by supplied bolts upon completion of the installation. Because the bumper will not be properly mounted during this...
view full answer... - Hitch and Thule Goalpost Recommendation for a 2008 Toyota TacomaI would recommend the Curt Hitch part # 13323. This is the most popular hitch we carry that is confirmed to fit the 2008 Toyota Tacoma. Even though the capacity is more than you need it would be your best option and it would give you greater flexibility for in the future if you were to want to tow a trailer. The bumper style hitches are universal and might require some modification to fit your bumper and they have much less capacity so the custom fit # 13323 would be a better choice. I...
view full answer... - Trailer Hitch Recommendation for a 2015 Toyota TacomaYes, the Curt Hitch part # 13323 that you referenced has been confirmed to fit your 2015 Toyota Tacoma so I would recommend it for you. I attached an install video for you to check out as well. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If...
view full answer... - New York Rangers Hitch Cover Recommendation for Toyota TacomaAs long as your 2013 Toyota Tacoma has a 2 inch hitch installed on it like the part # 13323 the New York Rangers 2" NHL Trailer Hitch Receiver Cover # OHCC010 that you referenced would fit and work well.
view full answer... - Trailer Hitch Fit for 2016 Toyota TacomaFor your 2016 Toyota Tacoma, you can use the Curt Class III Receiver Hitch # C13264. This hitch is confirmed to fit the 2016 Tacoma. I have attached the installation instructions for you. The # C13264 has a gross trailer weight capacity of 6,000 pounds and a maximum tongue weight of 900 pounds. The Curt # 13323 that you referenced is confirmed to fit 2005-2015 model year Tacomas.
view full answer... - Differences Between Curt # 13323 and Draw-Tite # 75236 Class III Hitches for 2009 Toyota TacomaThe Curt # 13323 and the Draw-Tite # 75236 Class III hitches share the same weight capacity and installation procedure. The appearance and design of the two hitches are pretty similar. As far as quality goes, both brands are about equal. Given this, there's no reason why you couldn't go with the less expensive Curt model. If you were planning on towing with your Tacoma, you might also need the following: Trailer wiring harness, part # 118496 Ball mount, part # D-4 Hitch Pin and Clip,...
view full answer... - Parts Needed to Tow a Light Pop Up Camper with a 2008 Toyota TacomaAll of the trailer hitches for the 2008 Toyota Tacoma are Class III hitches so that narrows it down a bit! I would go with a Class III even if there were other options because the Class III hitch has a higher capacity and the 2 inch receiver is compatible with more accessories. Curt trailer hitch # 13323 is the most popular option for the 2008 Toyota Tacoma so I recommend it. I have linked a video showing how it installs and a link to the installation instructions. Since you will be...
view full answer... - Trailer Hitch and Bike Rack Recommendation for a Holiday Rambler Travel TrailerI recommend going with a frame mount hitch. The most versatile frame mount hitch we offer is Curt Hitch, # 13703. It can be bolted or welded on and fits C-channel, I-beam, and Box frames. Any welding should be done by a qualified professional welder. I have included a link to the installation details for reference. For a bike rack you will need to go with one that is rated for use behind an RV. Check out the Swagman Platform-Style 2 Bike Carrier # S64663. This rack has been confirmed...
view full answer... - Hitch For 2011 Toyota Tacoma to Replace OEM HitchThe aftermarket hitches for a 2011 Toyota Tacoma don't fit alongside the factory installed hitch; some trucks have hitches you can add on to OEM hitches that fit underneath the original. So I can't see any reason why you wouldn't be able to replace your OEM hitch with the Curt Trailer Hitch Receiver # 13323. We did have one customer (see below cut out) mention replacing their OEM hitch, and they mentioned taking a look at the bumper brackets, which are required to install the # 13323....
view full answer...
- Fit of Hitch for 2006 Toyota Tacoma on 2006 Toyota HiluxFrom my research, I found that one of the primary differences between the Hilux and Tacoma is the frame at the rear of the truck. Since this is where the hitch attaches to the vehicle, the fact that the frame is different would affect the fit of the hitch. None of our hitch manufacturers have test fit a hitch meant for a Tacoma on a Hilux, since they're not available in the US. Because of this, they couldn't give me a definitive answer.
view full answer... - Best Hitch Recommendation for a 2006 Toyota TacomaAll of the hitches we offer that are confirmed to fit your 2006 Toyota Tacoma with a regular cab would work great, but the hitch we offer that has the most positive reviews and is the most inexpensive is the Curt Hitch part # 13323. I would highly recommend it for you because of that. I attached an install video for you to check out as well. To wire your vehicle for towing, you would be able to use custom-fit Tow Ready wiring harness # 118496. To equip your Tacoma for towing a trailer,...
view full answer... - Trailer Hitch Recommendation for a 2009 Toyota TacomaI have a much better solution for you than the Curt Hitch part # E-3S. You would want to go with a custom fit hitch instead like the part # 13323 as it will bolt directly to the frame and provide you with a much stonger and easier to install hitch than the # E-3S that would require you to use all 4 mouning holes. I attached an install video for you to check out as well. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts;...
view full answer... - Recommended Trailer Hitch and Towing Supplies for 2008 Toyota TacomaI'd recommend the Curt Class III receiver, part # 13323. The hitch offers a good balance of performance for the cost, when compared to the other hitches available for your Tacoma. The Curt model is just as strong as the Hidden Hitch and the Draw-Tite models, so you'll not sacrifice anything by going with the least expensive option. As far as a recommended installer, if you could reply with your City and Zip Code, I'll check with Curt and see who they recommend in your area. I've linked...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Randy B
Test Fit:
Brent H
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Kathleen M
Written by:
Lindsey S
Video by:
Chris R
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Kevin M.
4/13/2018
Thanks for the follow up. I have used this trailer hitch extensively, and it is a great product. Its also a pleasure to deal with a company that genuinely cares about its customers. You will get all my business as I need more products, and I will let all my friends know about etrailer also. Have a great day.