2017 Toyota Prius c Fluid Filters

Hey Jerry, the install of the Aries Bull Bar part #AAB35-4015 do require you to permanently remove the tow hooks to install. It looks like the similar Westin Ultimate Bull Bar part #32-3645 does allow you to keep them though.

Thank you for the photos and sorry to hear about your truck! The unique design of the B&W Tow & Stow 2-Ball Mount - Compatible with GM MultiPro Tailgate #BWTS20066BMP is that angled section that meets with the shank part of…

We do have the panels separately. What you're looking for is the Go Power Overlander Expansion Kit - 200 Watt Solar Panel #34282182.

Yes, you will. The longer length of the K-Source Custom Extendable Towing Mirrors item #KS62147-48G over the factory mirrors requires you to drill an extra hole for an additional support. These mirrors are confirmed to fit your 2018 Chevy Silverado…

There's no safe way to actually increase the towing capacity of a vehicle. There's things that can help a vehicle tow it's current capacity safer like suspension enhancement like the SumoSprings part #CSS-1125R…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Yes you can absolutely use the HappiJac Qwik-Load Turnbuckles for Camper Tie-Downs #LC182895 with your TorkLift tie downs.

This is a great question and one that can cause some confusion. SumoSprings capacity is determined by how much weight it takes to compress the spring down to 50% of its original body height, so a spring like the #SSF-106-40 will compress down to…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

Yes, the Superchips Flashpaq F5 Performance Tuner #SU1845 will work for your 2003 Ford Explorer V8 4.6L. The SU1060 that you mentioned is an older model that came with a separate color display that can be mounted on the dash, and while this would…

In order to add a brake controller to a 2021 Subaru Outback you'll first need to start with a 4-way trailer connector, the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #118467 is what I recommend. It's…

Since your 2021 Subaru Outback Wagon does not have factory trailer wiring you'd need to first install a 4-way with part #118467 and then convert it to a 7-way with a 7-way adapter like the part #37185 to give you the 7-way. But since…