Part Numbers: SB324-172,31322
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Hitch-mounted snowplow makes short work of your snowy driveway or parking lot. Pivoting, 5-position blade glides over uneven ground. Long-lasting actuator with internal clutch lets you operate plow from your warm cab.
Features:
Specs:
Note: Due to the size of this item it ships via truck freight.
The SnowBear Proshovel conveniently slides into your vehicle's front-mounted trailer hitch for easy, convenient mounting. Smoothly and easily raise and lower the plow from the comfort of your cab with the remote-controlled electric actuator. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain. Angled trip springs are also built in to help keep the blade from catching and tripping. Being just 39" away from the bumper, the Proshovel snowplow has a compact yet strong and sturdy design.
Simple, Hitch-Mounted Installation
This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. Unlike a plow that attaches to custom-fit brackets, which ties you down to just 1 vehicle, this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.
To install the Proshovel snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver . Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.
How to Plow
Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, 11 degrees to the left or to the right, or 22 degrees to the left or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or private roadway where piling the snow straight ahead would create a barrier.
To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote or the in-cab toggle switch, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the Proshovel.
When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.
Smooth, Controlled Lifting with Electric Actuator
The electric actuator on this plow allows you to lift and lower the blade using a toggle switch that mounts in your cab. You can also use the included wireless remote control. To raise the plow, activate the actuator. As the actuator moves along the internal screw, the arm on top of the actuator will pivot, raising the plow blade by pulling the chain that is attached to it. Having fewer moving parts than a typical winch makes this setup less complicated and less likely to break down than other plow lifting and lowering devices. There is also an internal clutch system that prevents damage to the actuator should you try to raise the blade too high or lower it too low.
Add-On Accessories
SnowBear offers a plethora of helpful accessories to make plowing even safer and easier. Along with the available accessories to enhance your snowplowing experience, many parts of the SnowBear Proshovel snowplow are available separately, so you can replace worn-out pieces without having to replace the whole plow.
The off-road halogen light kit (SB324-127) may be necessary if your plow blocks your vehicle's headlights. This kit will light up the way when you're plowing at night or in the early morning. The light kit mounts directly to your plow frame and offers increased visibility when plowing in dark conditions. The 2 bright halogen lights make it easier for you to see where you are going and for others to see you.
With the caster kit (SB324-126), it will be a breeze to move and store the Proshovel snowplow when it's not in use. These wheels mount directly behind the blade and they can be easily folded down for use and up for storage. In addition, these wheels will not weigh the plow down.
The drop extension kit (SB324-128) allows you to use your SnowBear snowplow on your lifted vehicle. With 6" of drop, this bolt-on kit ensures that the plow makes proper contact with the ground. Its sturdy steel construction is just as strong and durable as the plow itself.
If you are worried about causing damage to your lawn or pathway, the poly scraper attachment (SB324-069) is perfect for replacing the harsh, steel scraper on the Proshovel. The polymer construction is strong enough to still help plow efficiently, but gentle enough to not hurt your lawn or pathway.
Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.7 out of 5 stars (98 Customer Reviews)
Hitch-mounted snowplow makes short work of your snowy driveway or parking lot. Pivoting, 5-position blade glides over uneven ground. Long-lasting actuator with internal clutch lets you operate plow from your warm cab. Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.Overall it's a good light duty plow, works like it's supposed to, clears the snow with no problems. Originally purchased the plow with the hitch receiver mount, But the plow stuck out quite a bit in my opinion plus there was to much wobble. So I converted to the 2 point mount which brought the plow in closer and a lot less wobble.
There was an issue with the actuator, it would work intermittently when lowering the plow but Snow Bear covered it under warranty and sent me a new one.
My only gripe is that only after 3 months of Winter use, the whole plow was showing a lot of surface rust and the paint was peeling.
The hitch came packaged in a double box. The outer box had some damage but the hitch did not.
I read the instructions, making sure i had the correct tools, and jacked my truck up.
The install took three hours as i was layiing on my back with simple hand tools.
The parts all fit and i am happy with the outcome. Good price, simple instructions, good fit.
Overall it is a good setup, does the job it's suppose to. Had one problem with the actuator intermittently working when lowering the plow, but was replaced under warranty.
Originally purchased to use in a front mounted hitch receiver, but switched to the two point hookup which brought the plow in closer to the vehicle and made it a little more stable.
My only problem was after 3 months of winter use, paint was peeling and a lot of surface rust showing.
Excellent product. Always pleased with Curt products. Quality built with easy to install video provided by etrailer. Shout out to Alex at etrailer for getting me the exact fit for my 2007 Chevy Silverado. Good job etrailer. Received with 4 days of order placement
I bought the Curt front hitch for the purpose to haul my Honda Generator on the Torklift Lock and Load in front of my 2009 Chevy Silverado. The installation is self explanatory, but I still watched the video provided by e-trailer, and it made it that much easier to put in. Especially by myself. It works perfectly for the purpose I bought it for.
High quality product. Good instructions and all the necessary parts. Had to buy a 21mm socket and use a racket strap to pull stabilizing bar back a little to reach hole in frame but no big deal.
Dan
5/7/2022
After a season of plowing snow in Alaska my hitch is as good as new. It’s a lighter duty plow don’t still went through some abuse this last winter. No regrets on my purchase.
This product fit my needs perfectly. I purchased this hitch to mount a bicycle rack to the front of my pickup truck as I did not want to add weight to the back of my camp trailer on the flimsy bumper that is standard, and did not want to spend a fortune on a hitch that needed drilled or welded to my camp trailer. I looked at several options, and this appeared to be the best choice. With the video instructions and an hour of time, I had this hitch installed and bicycle rack in place. This product was relatively easy to install, and will suit my needs very well. Thank you etrailer!
I have a "new body" Silverado, so I had to return the first hitch and get this one. Even with the VIN, etrailer wasn't sure which one I needed. Once identified, the other was returned and this one was shipped fast (as usual). The video for the install help didn't include the big square hole "spacer", which must go along with the bolt inside the frame. This doesn't stop the bolt from spinning anyway, but it tightened up fine. I DID have to use a die grinder to open up the frame hole about 3/8". Nice hitch, for the new plow.
Ordered for mounting a winch on the front of my Silverado.
Free shipping was appreciated and quite fast. Received it in 3 business days because of my location.
Instructions were included and simple.
Product was well protected and packaged great.
Installation went as well as expected. I had slight alignment difficulty due to a deer committing suicide via my truck this past fall, but that wasn’t the products fault. Took me just over an hour total from setting up to tearing down.
Good quality bolts make for ease of mind.
Overall highly recommend. Great company. Even followed up with an email to make sure everything was good.
Will purchase from then again when needed.
Installed on my 2010 Silverado. Installation video was most helpful. Took about 2 hours to install which could have been shortened if I would have followed directions and not tightened bolts until the end. Product is good and customer service was as well. Would highly recommend.
Almost easy to install, for some reason alignment was difficult with the small bolts. Still not bad. Very happy overall.
Good solid American made product, Good price (I couldn't build it for that) Instructions where good, hour installation w/air tools, shipping was fast and free, all hardware was there (nothing missing). I would order again and would recommend.
Perry
1/25/2019
All good
It was not as easy yo install as the video seems to suggest. I had planned to do it myself with the truck on ramps, but had to get someone with a lift to do it. Once the plates were mounted the main part didn't line up just right and it took more pressure than I could apply while lying on my back. Other than that it is great. Very strong and just what I needed.Thanks.
Bought this hitch to add a plow to my 1/2ton truck the hitch was delivered with two of the same mounting brackets (passenger side) contacted them about problem and they said we will ship you the right bracket… bracket showed up and it had looked like it was dropped and slid across the pavement with multiple scratches and chips out of the paint. Not the happiest with the product since it’s not even on the truck yet. Over all the hitch it self is built well just horrible handling of products!
Jenny N.
1/13/2023
I hate that you experienced multiple issues with this order. I will have our Customer Service team reach out to you as quickly as possible.
The questions that you answer about what truck you have do not get all the way to the correct model. So then when you scroll through the available products, it is showing products for different models that dont apply to your truck(like the 1500, 2500, 3500 etc). However, you dont realize this as you just finished putting in the inputs for your vehicles and then of course assume that the list they give you of available products would only include your vehicle since they say "confirmed fit" for your model. They sent me the hitch for the gmc sierra 1500, which does not fit my 2500 GMC and then want me to pay the $50 to send it back. It seems like the designers of the website should have finished the job before they went to lunch. Now I am out the money.
Jenny N.
11/8/2021
I will have our customer service department reach out to you.
Beauty install. Just had to trim a 2x2inch slot in the air dam under the bumper. Didn't have to touch the facia. You can hardly see the receiver.
No drilling!!!
Curt Front Trailer Hitch arrived quite fast.
The hitch is very sturdy and attaches to the sturdy tow hooks.
The instructional video was very helpful especially for the step where you "fish" a bolt through the front frame rail. Turned out to be simple with the included fishwire. The video was for a 2007 Silverado but it was exactly the same as for my 2010 1500 Silverado.
Best installed with a helper at one point on a lift, but I installed it by myself using a pair of wheel ramps, a creeper, and a small hydraulic jack to lift the hitch into place for fitting and installation.
Why install a front hitch? When maneuvering a trailer in tight quarters, it is hard to do it with the trailer connected to the back of the tow vehicle. You have to keep straight which way to turn the steering wheel and the trailer's turning is slow to respond so you often turn too far and have to start over. With the trailer attached to the front of the vehicle, you can push the trailer into a tight place easily since the trailer responds immediately to steering changes. And, you can easily and immediately see the changes to the trailer's path. And you can also pull the trailer out of a tight path easily.
I grew up on a farm always pulling and pushing trailers into exact spots. I quickly found how great a front end hitch is for maneuvering.
Worked Great easy install
I ordered both the front and rear Curt class 3 hitches for my 2008 Gm sierra. The factory rear hitch had rusted from the inside and had split all the way across. This new hitch is a lot more heavy duty , with thicker metal and the ends are sealed to keep water out. I liked it so much , I ordered this front hitch to use our bicycle rack on front when we pull our camper . Did not know how to carry our bikes until I ran across this hitch on Trailer. I think it will solve our problem . Thanks etrailer !!! Also had best price, got free shipping, prompt service, and excellent customer service !! Will definitely order from them again !!!
Worked well with snowplow
etrailer was awesome as usual. I did have an issue with the product (Curt) having an incorrect part (two right side brackets, no right side bracket) which prevented installation of the receiver, Spoke with Dave at etrailer who initiated a fix for the problem right away. Cudos to Dave and etrailer but one star for Curt.
Fit between the mounting brackets on my 2008 GMC Sierra 1500 4x4 was a little tight but it bolted up just fine.
Looks very well made.
I removed the lower front air dam ( I didn't like it anyway) & it fit perfectly underneath the bumper & license plate mount.
Will be using the front hitch skid shield with this.
Grant I.
10/22/2014
FYI: The air dam is there to help with aerodynamics on the underside of the truck. In short, it helps make the truck more fuel efficient. No harm in removing it if you dont mind burning a bit more fuel.
Seems to be well made but was disappointed in two areas. I'm glad etrailer had a video of the install because the directions provided were very vague. The other issue was the bolt hole on the bracket that bolted to my crossmember didn't line up. I had to take the receiver back off the truck and elongate the hole in the receiver.
This will not fit a Sierra GMC 1500 in Denali Trim. Had to pay $xx to return. Disappointed in etrailer and the listing should be updated.
I bought this hitch so I can move my travel trailer better and also to use my bike rack more efficiently. I am going to have my garage install it since I do not have an impact wench to turn the bolts. So I hope this some help Phil
Philip B.
3/22/2021
I use the front hitch to transport more than two bikes It is easy to install and load the bikes on.
Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Peter
12/18/2018
It worked out great, I use a winch, and can move it to the front or rear as needed.