Summer Starts Here - Save up to 70%
Roof Rack Includes:
Part Numbers: Y00408,Y53TR,Y03536,Y00245
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof rack system. Works with accessories that clamp around the bars. Pair with Yakima towers, fit kit, and RoundBar SL Adapter to create a complete roof rack.
Features:
Specs:
Heavy-duty towers let you safely mount 2 Yakima crossbars to a vehicle with fixed mounting points, flush side rails, or a track system. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation.
Features:
Specs:
The heavy-duty SkyLine towers allow you to mount 2 Yakima crossbars to your vehicle with fixed mounting points, flush side rails, or tracks. The towers adjust during installation to ensure your crossbars are level. The SkyLines' versatile BarBeds accommodate Yakima's full line of crossbars. The towers install with Yakima's Landing Pad system .
Versatile BarBed
The SkyLine's BarBed is specifically designed to work with Yakima's entire line of crossbars.
The BarBed is curved to accommodate the elliptical shape of the CoreBar and JetStream crossbar. The CoreBar includes brackets that slide over the bar and secure to the towers with bolts. The JetStream attaches directly to the tower with bolts.
The towers also work with Yakima RoundBars with adapters . The adapters slide over the bars and secure to the towers with bolts.
The crossbars mount to the SkyLine towers with the included torque tool. The tool clicks 3 times once you've reached the correct amount of torque so you don't have to worry about over- or under-tightening.
Simple Installation with Landing Pads
The towers install with custom-fit Landing Pads . To mount a tower simply open the cover, set the tower on the Landing Pad, and close the cover.
Mounting posts on the bottom of the tower extend when the cover is closed to lock the tower in place on the Landing Pad.
Each tower's pitch can be adjusted up to 6 degrees forward or backward during installation. This lets you create a level mounting surface for your gear even on a curved roof. Simply loosen the bolt near the top of the tower assembly, adjust the position of your bar, and then re-tighten the bolt.
Same Key System Locks
SkyLine towers are compatible with Yakima SKS lock cores (Y07204 - sold separately) that allow you to secure the roof rack to your roof. The SKS locks are all keyed alike so a single key opens all the locks. The locks can also be swapped out to make all of your Yakima products keyed alike.
These adapters allow you to use Yakima RoundBars with BaseLine, SkyLine, TimberLine, or RidgeLine roof rack towers. Kit includes 4 adapters and 4 endcaps.
Features:
Custom-fit Landing Pads attach to the fixed mounting points in your vehicle's flush, factory side rails. The pads create mounting points for Yakima Skyline or Control towers.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today on our 2017 Honda CR-V, we're going to be test fitting the Yakima JetStream roof rack system. This is going to be consisting of part numbers Y00425, these are the JetStream crossbars. Part number Y00148, these are the SkyLine Towers, and they kind of snap into place with our landing pads. And the landing pads are going to be part number Y00245. This is specifically for the Honda CR-V.It attaches to two pre-attachment points on the actual flush mounted side rails of your CR-V, and these bars are designed to work with a wide variety of accessories. This helps you put anything you don't want inside the vehicle, outside, or just to free up a little bit more space if you need to.
It can work with bike racks, cargo baskets, or cargo boxes, and the general shape of the bars is going to be an aerodynamic shape. That's going to help cut down wind noise and drag while you drive.Moving our end cap here, this also works with T-Track accessories, but unlike the others, you actually just push down the strip at the top here so the T-Track accessory just slides in there that way. A lot of the other styles out there, you'll have to remove the strip, cut it to length, and kind of go through a hassle to get this installed, and this eliminates that for you.At the ends here, we do have these plastic locks that can be taken out and removed, and replaced with the Yakima SKS lock system, so you can secure this to your vehicle and also make inaudible 00:01:28 with your accessories that you're hauling. And, once everything is finished with your trip, these just can pop out of place by opening the ends and we have these plastic pieces that fit on top here, so you don't have to remove the mounts, and they're ready to go for next time.Now that we've shown you how this looks here, let's go ahead and show you how it actually installs. We have our rear bar partially assembled on our table here.
We'll go through the process of installing it onto our vehicle. We have the bar and the towers applied on one side, so our next step is we're going to go to the tower here as well as the fit kit for our actual bar, and install that on the other side.Starting with our plastic piece here that just pushes in place on top of our tower until you hear a light click. Then we'll take our metal piece here, which attaches to this screw on the inside. Then you tighten that down with the included tool. You're going to hear two or three audible clicks once this is done, like so.
Then we can slide this into the bottom of the bar. Then our final step is putting in our end cap.Now we can move on to our actual mounting point here. We'll take the padded portion and these points here will fit into the holes in the bottom. Just kind of match up. Then just push them into place like so.
Then we'll take the screws and the flat washers and install them onto our fixed mounting points onto our flush mount side rails. Find our points, and find the proper configuration, too, that works best for your vehicle. We'll get these finger tightened first. Then we use the tightening tool and finish them off.Now we can take our bar and set it into place as well, making sure that they're open all the way. We'll set them into our cradles. Our landing pads, I should say. And then we'll get the crossbar overhang figured out as well. You're going to want to make sure that that's even on both sides. Have to loosen it up just a little bit. And try not to do that. There we go. All right, that looks good. Our final step is to tighten down the bolt in the center here. This is going to tighten up the tower to our bar. That's done. Close this up, and that'll lock it to the landing pad, and repeat this on the driver's side as well.Next, I'm going to give you a couple quick measurements here that'll help you out in regards to the height that it's going to add to your vehicle. We're going to start in the center of the roof and measure to the bottom and the top of the bar. From the center to the bottom, it's going to be about five inches. From the center to the top, it's going to be about five and seven eighths inches, so that's adding quite a bit to the top of your roof, so keep that in mind when you have your bike racks and your cargo baskets fully loaded when you're pulling it into your garage. And this roof rack system does have 165 pounds of carrying capacity once installed, but you always want to double check with your vehicle's manual and go by its recommendations, and go by the smaller of the two numbers. And there you have it for the Yakima JetStream roof rack system on our 2017 Honda CR-V.
Average Customer Rating: 4.8 out of 5 stars (17226 Customer Reviews)
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof rack system. Works with accessories that clamp around the bars. Pair with Yakima towers, fit kit, and RoundBar SL Adapter to create a complete roof rack. Heavy-duty towers let you safely mount 2 Yakima crossbars to a vehicle with fixed mounting points, flush side rails, or a track system. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation. These adapters allow you to use Yakima RoundBars with BaseLine, SkyLine, TimberLine, or RidgeLine roof rack towers. Kit includes 4 adapters and 4 endcaps. Custom-fit Landing Pads attach to the fixed mounting points in your vehicle's flush, factory side rails. The pads create mounting points for Yakima Skyline or Control towers.I have been using Yakima racks for around 40 years and have never had any problems. However, I am amazed at the price increases over the years. Etrailer prices were by far lower than most. Overall, a very excellent purchase.
I'm happy that this allows me to save money by using my old round bars on my new vehicle, with only the purchase of new "towers" and these adapters.
etrailer is excellent...however, not too pleased with Yakima and these cross bars - second set in four years...they make them out of a steel that rusts quickly...better out of stainless or aluminum. Maybe that is their idea of planned obsolescence. I also learned not to install end caps...that accelerated the corrosive process.
Kimberly has shown that great customer service is not dead! etrailer and Kimberly are great to work with and have earned my business and will always be the 1st and last place I look for my rack+ needs!
As for the application, I needed more space to fit my cargo box on top of my 4Runner TRD Pro’s rack. I came up this this… Thank you!
I have these installed on a 2022 Honda Pilot. I could not get them to fit on my raised roof rails with the included rubber gaskets. I have mounted them without the gasket but this leaves a gap between the rail and the landing pad. This seems secure but does not have a finished look. I will be trying to see how to get the gaskets to fit.
Everything from etrailer is timely and of good quality! The Yakima crossbars are no exception - they are indestructible.
Works perfectly. I am always impressed that Yakima continues to make parts for the "old roundbars" since they have since moved on to the superior JetStream bars.
Fit our Subaru Forester perfectly. Install was a breeze. For the money I wish they came with the core locks.
In the confusing world of roof racks, the etrailor site had a locator tool that made it easy to identify the correct landing pads and towers for my vehicle.
I had cross bars and landing pads on my Jeep Grand Cherokee. I bought these to put on my wife’s new Grand Cherokee L. They were extremely easy to install and now I can easily move the roof rails between the two vehicles. They are a great product as is most of Yakima’s products. I highly recommend them.
I ordered the Yakima roof rack, with the Hullyrollers for the back crossbar and the Mako saddles for the front crossbar to use with my kayak. It arrived just like they told me and I put them on my car the eveningit arrived. Got to finlly use the roof rack on June 22 to go out kayaking and it worked great. Only thing is I did not know about the air reflector piece for the front crossbar. Now I will be ordering it to help with the wind noise.
Great rack, go on fast, easy to install and work well on my VW TDI wagon. Care has to be given and follow the instructions for the install to what type of rails you have. Works great carrying the VW luggage carrier and plan on using it to carry kayaks as well. Just have not decided what kayak rack type to get yet.
These crossbars were easy to install and adjust. Be sure to get all the pieces you need. There is no mention of the Landing Pads necessary to use these.
necessary for using the widest cross bar option (78"). East to install
Very nice quality towers. Very heavy duty! They have a cool "snap" on / off mechanism for quick removal and installation.
The Yakima roof rack system is an Outstanding product. I purchased the product to replace the OEM roof rack because it was too flimsy to carry the tandem bike mount and my bike. The Yakima roof rack is solid and provides me the peace of mind while hauling my bike on the roof of my car. etrailer provided the product for the best price as always.
I've attachec a few pictures of the Yakima rack on my Audi Q7. It took a few attempts to find the right combination of attachments, but in the end, the pin attachments work best with the access points on the factory flush-mount rails. Great product!!!!!
roof racks showed up in great condition, and showed up as one package.... I should have ordered the J racks from here but I found them cheaper locally so Thule J racks compliment the whole setup and i am just about ready to hit the water :)
Kit worked perfectly on my 2021 Subaru Forester. The whole install took 30 minutes. Never been disappointed with etrailer.
The installation of this rack system went very well, all of the instructions were easy to read and use. I have attached some pictures of our installation. The vehicle is a 1994 Honda Accord EX four door sedan
Roof Rack 2008 Saturn Astra The roof rack arrived one day early...The packaging was excellent and the quality of the product more than met my expectations. The instructions made the insulation very easy. It took less than 45 minutes to install the unit complete.
Excellent selection of rack parts. Very useful installation videos help when choosing between products. Easy ordering process. Quick delivery.
The rack has been so useful since I purchased it. Staff at etrailer.com were exceptionally helpful in getting the best option for my car and answering questions. I recommend this company, for its 110% customer service, excellent prices and timely delivery.
Have been rocking my Yakima rack from etrailer.com for a year now. I am using rack in conjunction with a Tepui tent. Once I added the air deflector, I would say it's the perfect setup. The Yakima gives more clearance over the factory rack, so I was able to get my hands under it to secure the tent hardware. If you're thinking of upgrading your factory rack, I would not hesitate to use etrailer.com
One quick phone call and Gwendolyn figured out exactly what I needed for our new car to use my old Yakima rack.
Ask the Experts about this Roof Rack
Do you have a question about this Roof Rack?
Yakima Accessories
Fit to this rack on your 2020 Honda CR-V
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Andrew N.
10/15/2022
You definitely want to use the gaskets and I dont recommend using the crossbars without them. Here is an install video that might help you out with this part. Let us know if you still some assistance after watching.
Helpful Links
https:www.etrailer.comtv-review-yakima-roof-rack-2017-honda-cr-v-y00425.aspx