Where Do the Carr Custom-Fit Side Steps Install on the Vehicle?  

The Trimax King Pin Lock #TMX56RR can still be used with your 5th wheel having a capture plate from PullRite. The capture plate mounts to the top of the kingpin and only takes up a similar amount of space that a Lube Plate #RP83002 would. If you…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The Erickson Retractable Tow Strap #EM77JR has a safe working load rating of 4,500lbs. This is the maximum weight for the vehicle or equipment you are towing. The 9,000lb rating is the break strength. This is the weight capacity the strap will…

Dexter 8-249 hubs normally have inner bearings like Item #L68149 and outer bearings like Item #L44649. If these are your bearings (the size will be stamped on them) then it sounds like you need Trailer Hub and Drum Assembly Item #84556UC3 by Dexter…

For a keyless door latch we have the Global Link Ultra E Pro Electronic Lock for Travel Trailer w Keyed Alike Option #295-000183 which installs on the left side of the door (when looking at it from the outside) but the cutout requirement is much…

If you were to install the CARR steps #CARR103991-1 on your 2010 GMC Sierra they would stick out 8-5/8 inches from where they are installed.

There should be enough free play in the shackles to allow them to move. There is no specific torque rating for shackle bolts. The first thing you should make sure of is that the bolts you use are long enough so that when installed you will have at…

Basically you need to remove a panel on the dash of your 2018 Lincoln Navigator and the connector is there for you to attach to. See attached picture.

Carr Step part #CARR103991-1 is a single black aluminum step, but you are correct that this same product is also offered as a set of two steps as part #CARR103991. If you purchase the 2-step kit the cost per step drops so there is a price benefit to…