Universal Hitch to Install on a Class A RV Rated for 10,000 Pounds  

For your 2003 Holiday Rambler motorhome, I recommend taking a look at the: -Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver #41990-07. This trailer hitch as a maximum towing capacity of 16,000lbs, with a maximum tongue weight capacity of…

Since your vehicle is built on an RV chassis there is a solution for installing a hitch, but a custom fit is not available. I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body truck like…

Best option we have would be a service body cross tube part #41990 like you mentioned and then having plates or fabricated like you mentioned.

As far as mounting your 472-pound motorcycle along with the 52-pound Ultra-Fab Dirt Bike Carrier #UF48-979033 on your hitch rated for 500-pound hitch, you should definitely upgrade the hitch. This is because it is extremely dangerous to exceed the…

I have a universal fit hitch setup that would have more capacity, but you will need to make sure that the RV has the additional capacity you would require as well. A towing setup is only as strong as it's weakest component. You would want…

You will need to verify your maximum trailer weight based on the GVWR for your 2023 Ford F-53 chassis. This information is straight from the Ford Trailer and Towing guide which lines out the maximum trailer weight based on the GVWR for your…

In order to flat tow your 2022 Ford F-250 you will need a base plate, tow bar, wiring, and supplemental braking system. It looks like you can flat tow your truck as long as you have the 4 wheel drive model. Make sure to consult your owner's…

The only option to put a trailer hitch receiver on your 1998 Tioga Class C Motorhome is going to be the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver #41990-07 that has a 7" weld on mounting bracket or the Draw-Tite Ultra Frame…

The best option we have for a 2008 Fleetwood Discovery Motorhome is the Multi-Fit Motor Home Trailer Hitch part #82201. In order to install this hitch you will need to drill into the frame but this is the only option since they don't have…

The overall width of the Buyers Products Class 4 Service Body Long Hitch Receiver #3371801055 that you referenced 44-1/2 inches. I attached a picture that has that dimension and a few others listed as well.

The Super Titan 4000 Weld-On Trailer Hitch part #38124 is a weld on application and does not come in a bolt on version. All of our heavy duty truck hitches are weld-on but the Buyers Products Class 4 Service Body Long Hitch Receiver part #3371801055…

There is a Class IV universal weld-on trailer hitch available, the Buyers Products Class 4 Service Body Short Hitch Receiver #3371801053, although the Curt #15901 is only available as a Class V trailer hitch as there is not a Class IV version…