Recommendation for a Trailer Hitch and Coupler Lock Set that Can be Keyed Alike  

When attaching a cable lock such as #e98891 to a trailer hitch you would run it through the safety chain loops that are on the sides of the receiver. You would still use the regular hitch pin or bolt to secure the carrier in the hitch. I have…

Yes, you can get all of the locks you have mentioned keyed alike as long as you order from our Keyed Alike locks page. If you order all the locks you need at the same time they will come keyed alike. If you decide you need another lock keyed the same…

The Curt Trailer Hitch Receiver Adapter - 1-1/4" (Class II) to 2" #C45785 does not come with a hitch pin. If you are in need of a hitch pin for the 1-1/4" end of the receiver, that is the #5200. For the 2" receiver end, that is…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

You have measured the cover of your pop-up camper exactly right, as it is the closed box width that matters for the right fit, so you'll need one for a 12 foot long pop-up; the covers do take into account things like AC as well in regards to fit.…

Hey Perry, so due to the door style that is at the rear of a 2023 Mercedes Sprinter the Inno tilt cargo carrier part #IN94MR wouldn't allow the door to open as it would sit up too tall even folded down but I do have a similar solution that would…

I recommend the BOLT Trailer Hitch Receiver Lock #BL7023584 and BOLT Trailer Coupler Lock #BL7025289 for your 2020 Toyota Tundra. These locks will key to your Toyota edge cut key(see diagram), it will not work if you have a center cut key. The…

The Blue Ox Hitch Receiver and Coupler Latch Lock Set #BLU36XR have a stainless steel design which is much more resistant than a chrome-plated design. This isn't offered with a keyed alike option and it doesn't look like any of our other…

The Saris #SA17158 replacement strap measures 13-1/2 inches long by 7/8 inches wide, as seen in the photo I've edited for you.

A Dexter 8k hub would have an 8 on 6-1/2 inch bolt pattern like what the part #TA45ZR has. This is also a 17.5 inch diameter trailer wheel. For a mod style wheel instead, we have the part #TA35ZR.