2019 Toyota RAV4 Roof Rack

Features:

This quiet, aerodynamic roof rack mounts to your vehicle with raised, factory side rails. Crossbars accommodate accessories that mount in the T-slots or clamp around the bars. Full-length aluminum crossbars maximize carrying capacity. Includes locks.

Features:

This complete roof rack system mounts to your vehicle with raised, factory side rails. Full-length square crossbars work with most clamp-on carriers and accessories. Vinyl-coated steel bars are corrosion resistant. Includes locks to deter theft.

Features:

This complete roof rack system mounts to your vehicle with raised, factory side rails. Full-length square crossbars work with most clamp-on carriers and accessories. Vinyl-coated steel bars are corrosion resistant. Includes locks to deter theft.

Features:

Sleek, crescent-shaped crossbars allow you to mount a variety of roof rack accessories to your vehicle's factory side rails. Lightweight aluminum bars can support most kayaks, canoes, and rooftop cargo carriers. Locking knobs deter theft.

Features:

This quiet, aerodynamic roof rack mounts to your vehicle with raised, factory side rails. Crossbars accommodate accessories that mount in the T-slots or clamp around the bars. Full-length aluminum crossbars maximize carrying capacity. Includes locks.

Features:

Built for off-road use, this platform rack's large, flat surface accommodates loads of all shapes and sizes. 4 Roof rack legs install to the fixed mounting points on your vehicle's roof. Compatible with many Rhino-Rack accessories.

Features:

Built for off-road use, this platform rack's large surface accommodates all types of gear and cargo. RuggedLine HD system provides a strong mounting surface for the platform. Compatible with many Yakima accessories.

Installation Notes:

Drilling required for installation

Tech Tip:

Rivnut installation tool is required for installation

Features:

Built for off-road use, this platform rack's large, flat surface accommodates loads of all shapes and sizes. Included Backbone mounting system provides a strong, stable mounting surface for platform. Compatible with many Rhino-Rack accessories.

Features:

Built for off-road use, this platform rack's large, flat surface accommodates loads of all shapes and sizes. 4 Roof rack legs install to the raised factory side rails on your vehicle's roof. Compatible with many Rhino-Rack accessories.

Features:

Aerodynamic, aluminum crossbar lets you build an aftermarket roof rack for your vehicle. Full-length bar provides plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Includes theft-deterring plastic locks.

Features:

Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.

Installation Notes:

It is not recommended to open, vent, or retract the sun/moon/glass roof while product is installed

Features:

Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.

Installation Notes:

It is not recommended to open, vent, or retract the sun/moon/glass roof while product is installed

Features:

Premium, aerodynamic crossbars attach to Thule Edge feet to create an aftermarket roof rack for your vehicle. T-tracks with dual rubber strips let you easily install awnings, carriers, and other channel-mount accessories - no trimming required.

Installation Notes:

It is not recommended to open, vent, or retract the sun/moon/glass roof while product is installed

Features:

Premium, aerodynamic crossbars attach to Thule Edge feet to create an aftermarket roof rack for your vehicle. T-tracks with dual rubber strips let you easily install awnings, carriers, and other channel-mount accessories - no trimming required.

Installation Notes:

It is not recommended to open, vent, or retract the sun/moon/glass roof while product is installed

Features:

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof rack system. Works with accessories that clamp around the bars. Pair with Yakima towers, fit kit, and RoundBar SL Adapter to create a complete roof rack.

Features:

These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Features:

Heavy-duty crossbars mount to Yakima towers (sold separately) to create an aftermarket roof rack. Top and bottom channels let you add channel-mount accessories. Tie-down points in endcaps let you easily secure cargo.

Features:

These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.

Features:

Low-profile, aerodynamic crossbar lets you build an aftermarket roof rack for your vehicle. Aluminum bar has a T-slot that lets you mount channel-mounted carriers and accessories. Rubber strip in T-slot keeps out dirt and won't need trimming.

Features:

This aerodynamic, flush-mount roof rack lets you carry gear and cargo on your vehicle while maintaining a clean, factory look. Crossbars work with channel-mount and clamp-on accessories. Installs directly on your vehicle's raised side rails.

Features:

Made for the adventurer, this platform rack's large, flat surface lets you carry all types of cargo and gear. Installs to the raised side rails on your vehicle's roof - drilling required. Works with many Front Runner accessories.

Installation Notes:

Drilling is required for installation

Tech Tip:

This application is intended for RAV4 Adventure and TRD models only

Features:

This sleek, sturdy platform rack lets you carry all the gear you need for your adventure. Aerodynamic wind fairing reduces drag. Installs in the ditches of your vehicle's roof - drilling required. Works with many Front Runner accessories.

Installation Notes:

Drilling is required for installation

Additional drilling is needed for LE models

Features:

Made for the adventurer, this platform rack's large, flat surface lets you carry all types of cargo and gear. Installs in the fixed mounting points of your vehicle's roof. Works with many Front Runner accessories.

Installation Notes:

Drilling is required for installation

Tech Tip:

This application is not intended for RAV4 Adventure and TRD models

Features:

This sleek, sturdy platform rack lets you carry all the gear you need for your adventure. Aerodynamic wind fairing reduces drag. Installs in the ditches of your vehicle's roof - drilling required. Works with many Front Runner accessories.

Installation Notes:

Drilling is required for installation

Additional drilling is needed for LE models

Features:

SquareBar Evo crossbars attach to Thule feet to create a durable, reliable roof rack for your vehicle. Bars are constructed of galvanized steel with a polymer coating that provides grip for your cargo. Accommodate accessories that clamp around bars.

Installation Notes:

It is not recommended to open, vent, or retract the sun/moon/glass roof while product is installed

Features:

Low-profile, aerodynamic crossbar lets you build an aftermarket roof rack for your vehicle. Aluminum bar has a T-slot that lets you mount channel-mounted carriers and accessories. Rubber strip in T-slot keeps out dirt and won't need trimming.

Features:

Low-profile, aerodynamic crossbar lets you build an aftermarket roof rack for your vehicle. Aluminum bar has a T-slot that lets you mount channel-mounted carriers and accessories. Rubber strip in T-slot keeps out dirt and won't need trimming.

Features:

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof rack system. Works with accessories that clamp around the bars. Pair with Yakima towers, fit kit, and RoundBar SL Adapter to create a complete roof rack.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

Heavy-duty crossbars mount to Yakima towers (sold separately) to create an aftermarket roof rack. Top and bottom channels let you add channel-mount accessories. Tie-down points in endcaps let you easily secure cargo.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

Designed for use in the Australian Outback, this rugged platform lets you bring whatever gear you might need for your next adventure. Compatible with many Yakima off-road and traditional roof rack accessories.