2024 Ford F-350 Super Duty Vehicle Snow Plows

Good question! The blade stiffeners that come with the Detail K2 Snowplow #K2AVAL8422 don't necessarily have to be used. I reached out to my contact at Detail K2 who said that the only time that those stiffeners really need to be used is if you…

Hey Bruce! The support bar mounting issue you pointed out is why I am going to steer you away from using the Curt Front Hitch item #31302 to attach a snow plow on your 2006 Yukon. Those support bars on the SnowBear Snowplow item #K2AVAL8219…

Hey John, thanks for reaching out! It all depends on what snowplow you go with. For example, the Agri-Cover SnowSport LT #SS98GV requires 8" - 14" of clearance under the receiver, while the Detail K2 Snowplow #K2AVAL8826 requires a hitch…

For your 2006 Honda Ridgeline, the K2 Avalanche plow is only a fit for the front mounted receiver. The custom mount brackets #K286110 are not a direct fit for your Avalanche plow but the mount does come with a crossbar and I've attached the photo…

Hello Rickey. The Curt Class 2 Hitch #C12181 is currently the only custom fit aftermarket hitch available for the 1991 Mitsubishi Montero and it uses a 1-1/4" receiver. The only way to add a 2" receiver to this vehicle would be to use a…

It is likely you can avoid the drain line when installing the MORryde X-Factor Crossmember for Standard Frame Hangers #MR33WR by using the MORryde X-Factor Crossmember Adapter Kit for Drop Down Applications #MR43WR. I don't know exactly the…

To install the Curt Hitch part #C31068 on your 2014 Ford F-150 with Ecoboost you will need to remove the air dam and then trim a small section of the lower fascia. See photo.

That's a really valid concern about the install of the Draw Tite hitch #65079 on your 2021 Jeep Wrangler 4xe Rubicon. I personally am not a fan of snow plows that attach to front hitches as from experience here at etrailer they just aren't…

K2 recommends that their #K281488LB2 Halogen High/Low Beam Light Kit with Turn Signals be used with their #K2AVAL8422 Avalanche snowplow. The kit includes the wiring harness, brackets and all necessary installation hardware. I've linked to a…

Both the SnowBear Proshovel Snowplow, with Electric Actuator #SB324-168 and the SnowBear Personal Snowplow, with Electric Winch #SB324-080 will allow you to easily raise and lower the snowplow, and both come with an in-cab toggle switch, as well as a…

The Curt Front Mount Trailer Hitch Receiver #C31068 is my recommendation for your 2012 Ford F-150. I then recommend the Curt Class III Ball Mount with 2" Ball - 2" Drop #C45036 to allow you to launch and load your bass tracker boat. This…

I do have the mounting kit you would need to install a snowplow such as the Detail K2 Storm II Snowplow part #K2STOR8422 on your 2000 Dodge Ram Pickup but the mounting kit is not included with the snowplow. For a mounting kit that will allow you to…