5th Wheel Tailgate Specs:
Features:
This tailgate from Stromberg Carlson features an open design that improves your field of vision when driving and is custom fit to your vehicle. Cutout allows for easy towing of 5th-wheel and gooseneck trailers, and aerodynamic design reduces drag.
Tech Tip:
Tabs will need to be removed from your factory pivot tube insert. If you would like to retain use of the factory tailgate, please order Part ETZZ-99430B22-A at your local Ford dealership.
More Information >5th Wheel Tailgate Specs:
Features:
This strong-as-steel plastic tailgate features a cutout that makes it perfect for towing a 5th-wheel or gooseneck trailer. The locking tailgate has built-in louvers that reduce drag, and it mounts securely with rotary latches and coated cables.
Tech Tip:
Tailgate fits vehicles with a standard 5 ft. wide bed.
More Information >Videos
for Tailgate
Help Articles
for Tailgate
Expert Answers
for Tailgate
Hello Kevin, congrats on the new truck and new motorhome. I can definitely help with this. First, I will give you a list of parts, then a few important notes and such. For your 2023 GMC Canyon Denali I recommend the following: - Demco Tabless Base…
view full answer...The Air Lift LoadLifter 5000 #AL88200 will work with the Air Lift Air Helper Spring Cradle #AL59DQ on your 2013 Ford F-150. The cradle actually replaces the lower roll plate so the air bag will sit directly in the cradle. I'm not sure…
view full answer...You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…
view full answer...Most manufacturers are in the process of discontinuing their fifth wheel tailgates with the camera relocation kits due to mechanical issues. Therefore I could not find one that fits your 2017 Ford F-350 Super Duty. The Stromberg Carlson 4000 Series…
view full answer...The Replacement Tailgate Top Seal for Pace Edwards Retractable Tonneau Covers #PE99CV does not come with great instructions. In order to install the Replacement Tailgate Top Seal for Pace Edwards Retractable Tonneau Covers #PE99CV, you will need to…
view full answer...The Gooseneck to 5th Wheel Trailer Coupler Adapter #KPG5-R30IP you found is our only 4" tube rated for 30K. The plate does not have to sit perfectly square inside the 5th wheel hitch as it will still latch into the coupler. You will want to…
view full answer...Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb…
view full answer...For a 5th Wheel Tailgate like #VGD-10-4000, I recommend the Rear View Safety Backup Camera System with Flush Mount Camera #RVS-7707721 or the Rear View Safety Backup Camera System - Mirror with Monitor #RVS-772718 with this same camera. This is one…
view full answer...You wouldn't use a spring like #RS16933LH because it produces 2,000 foot pounds of torque and you would not be able to open the ramp. What I recommend is either the Rack'em Double Barrel tailgate assist, #RA-27C. The Double Barrel…
view full answer...The main difference between the Demco Tabless Base Plate Kit #DM77YV and the Roadmaster Direct-Connect Base Plate Kit #RM97RR is just going to be the brand really. They're both very similar in the way they install, with Roadmaster being a…
view full answer...As shown in the attached video at about the 32 second mark, the template is used to show where to drill the hole in the truck tailgate post and then in the tailgate itself. You want to make sure you mark and drill the holes that are designed for…
view full answer...Hey Carl, thanks for writing in, and that's a good question. Thankfully, the answer is no, you do not need to cut or trim the fascia/face plate on a 2024 Ford Maverick to install the Demco base plate that fits, which is the following part…
view full answer...Filter Products (4)
Contact and Help
What our customers are saying:
In these days of customer "no service" I am usually disapointed when doing business with people I don't know. It was refreshing doing business with you. I'm impressed!
Randy
Watkinsville, GA