2019 Jeep Wrangler Unlimited Base Plate for Tow Bar

Installation Notes:

Requires temporary removal of bumper/fascia during installation

Trimming of front air dam and/or fascia may be required for installation

Installation Notes:

Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.

Product fits vehicles without winches or guards

Special tools required, see instructions.

Installation Notes:

Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.

Product fits vehicles without winches or guards

Special tools required, see instructions.

Installation Notes:

Bumper fascia must be removed and replaced during installation

Installation Notes:

Requires temporary removal of bumper/fascia during installation

Installation Notes:

Requires temporary removal of bumper, fascia, and/or grille during installation

Trimming of front air dam and/or fascia may be required for installation

Tech Tip:

Product fits bumper mounts with a 1 inch pin diameter, and includes spacers to fit mounts from 5/8 inch to 7/8 inch thick.

Tech Tip:

Product fits bumper mounts with a 7/8 inch pin diameter, and includes spacers to fit mounts from 5/8 inch to 7/8 inch thick.

Installation Notes:

Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.

Product fits vehicles without winches or guards

Special tools required, see instructions.

Installation Notes:

Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.

Product fits vehicles without winches or guards

Special tools required, see instructions.

Installation Notes:

Front skid plate must be removed (if equipped) and will not be able to be reattached

Requires temporary removal of bumper, fascia, and/or grille during installation

Tech Tip:

Since the factory skid plate will not be able to remain on the vehicle after installation, Demco provides a skid plate as a replacement with this baseplate kit.

Installation Notes:

Installation requires some minor drilling

Requires temporary removal of bumper/fascia during installation

Trimming or removal of underbody panel required for installation

Installation Notes:

Requires temporary removal of bumper, fascia, and/or grille during installation

Drilling through vehicle frame required for installation

Tech Tip:

Product fits vehicles that are equipped with Warn winch VR EVO 10-S, part number 103253. May also be installed without the Warn winch by purchasing a Mopar winch mounting kit from a Jeep dealer.

Tech Tip:

Product will also fit bumpers with a 1 inch thick mount that need extended reach, such as the Smittybilt Gen2 bumpers.

Installation Notes:

Requires temporary removal of bumper, fascia, and/or grille during installation

Drilling through vehicle frame required for installation

Tech Tip:

Product fits vehicles that are equipped with Warn winch VR EVO 10-S, part number 103253. May also be installed without the Warn winch by purchasing a Mopar winch mounting kit from a Jeep dealer.