1995 Ford F-250 and F-350 Windshield Covers

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Harry, so the side window shades of the part #WT87QV basically just push up into the window area and from being sized just right and being super lightweight they hold themselves into the area. Basically…

Hello again, James. We will need to consider a different approach here because the Timbren Silent Ride Suspension like part #TSR3500S05 cannot be used with torsion axles. In order to use the Silent Ride you would need to completely replace both…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

When you use a Hitch Extender #e88YR with the Curt Trailer Hitch Receiver #C77ZV on your 2024 Toyota Crown it is important to remember the extender reduces the receiver weight capacity by 50%. So rather than being able to hold 350lbs it reduces to…

To flat tow your 2021 Chevy Spark you'll…

Hey Dario, for a tow bar lighting solution for your 2015 Fiat 500 your best option would be the Roadmaster Diode kit part #RM-15267. We…

Hey Craig, so the Curt pintle part #C48005 that you referenced is designed for lunette rings that are 2-1/2 inch in diameter like the part #RM-581 and not the 3 inch ring part #RM-583. For a similar pintle hook that fits both sizes we have the part…

Hi Kurt, Most Class C and B motorhomes use the exact same cab so…

Hey Steven, If you're seeing power on the…

We do indeed have both a trailer hitch and a 4-way wiring harness that fits your 2024 Toyota Crown. The correct parts - which I verified directly with the manufacturer for you - are the following: - Curt Trailer Hitch Receiver #C77ZV - Curt…

Hey Bob, There is indeed a loading ramp from Thule that will work with any of the Epos bike racks - the Thule Epos 3-Bike Rack #TH69XE, Thule Epos 2-Bike Rack w/ LED Lights #TH49XE, and Thule Epos 2-Bike Rack #TH99XE. I went ahead and verified for…