2009 Buick Allure Windshield Wiper Blades

Your 2021 Ram 3500 uses…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Yes, you will be able to use the Furrion Chill HE RV Air Conditioner System #FR87FJ to replace all your Coleman MACH components. The thermostat will be able to control your furnace and run off the thermostat wiring your Coleman AC uses.

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

As you have a Coleman Mach system currently you can use the Furrion Chill AC units from the list below. These will simply replace only the rooftop units and the controls and thermostats you currently have in place with control the new…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13…

I attached a picture that shows what the three different styles of wiper blades look like. Beam and Frame are the most different and Hybrid is mix of the two. The #MCH8519 is the hybrid style in the middle.

I reached out to my contact at Lippert Components and confirmed the replacement steps based on the 903206000 number you gave are the Lippert Components Kwikee 32 Series Double Tread Electric Step #LC372261. This is the exact replacement for your…

If your 2003 Chevrolet Silverado 2500 HD has the factory installed hitch and a 7-Way connector, then all of the wires for the brake controller have been run. The factory brake controller port is located in the black box underneath the dash on the…

We have exactly what you need. For the amber lens light you would want the Oval Clearance Light part #MC38AB and then for the red light you would want the Peterson Red Oblong Clearance Light part #423000.

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure…