Brophy Slide In Camper Tie-Downs - Extra Clearance - No Drill Bed Mount - Qty 4
(143 reviews)
Price: $270.31
In Stock
Brophy Slide In Camper Tie-Downs - Extra Clearance - No Drill Bed Mount - Qty 4
Item # HSAB
Our Price: $270.31
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (143)
- Q & A (0)
- Photos
- Used (4)
Brophy Camper Tie-Downs - HSAB
- Front and Rear Tie-Downs
- Brophy
- Bed-Mounted
- Powder Coated Steel
The angled design of these tie-downs gives you extra clearance for attaching your turnbuckles, making them easy to use. Powder coated steel brackets clamp onto the side rails of your full-size pickup with no drilling required.
Features:
- Creates attachment points for securing your camper to your truck bed
- Wide clamps provide superior holding strength
- Makes it easier to attach your turnbuckles (sold separately)
- Angled bracket provides more clearance between tie-downs and truck fenders than standard tie-downs
- Protects your truck's paint with neoprene pads attached to the brackets
- Resists corrosion and rust with black powder-coated steel
- Clamps securely onto your bed rails - no drilling required
- Includes 4 camper tie-downs with clamp plates, 12 neoprene pads, and installation hardware
- Made in the USA
Specs:
- Application: for exact fits, enter in your vehicle's year/make/model above
- Minimum 2" needed between sidewall and lip of bed rail
- Not compatible with drop-in bed liners, aftermarket bed rails, double-walled beds, or side-step beds
- Dimensions: see diagrams below
- 1-Year limited warranty
Angled Bracket Makes for Easy Hookup
These particular tie-downs are designed with an angled bracket that gives you more clearance between the tie-down anchor points and your truck's fenders. This extra space makes it much easier to attach and tighten your turnbuckles (sold separately) when you're securing your camper.
No-Drill Installation
These clamp-on tie-downs install quickly and easily, with no drilling or modification to your truck required. Because they're mounted in the bed instead of on the frame or body of your truck, you don't need any kind of fancy mechanical background to get this job done. You just need to slide the hold downs over the rails of your truck and clamp them down with T-bars and hex bolts.
The fact that they simply clamp on means that you can remove these tie-downs when you're not hauling your camper, leaving no trace. Use the provided neoprene pads on the T-bolts and tie-downs where they will make contact with your truck to make sure no scratches or dents will be left behind either.
It's important that the tie-downs on your truck line up with the anchors on your camper at the correct angle to ensure a secure hold. Ideally the tie-downs should be on the outside of your camper's anchor points, but they can be on the inside as well, just as long as they're not lined up with each other.
Securing your Camper
To secure your camper to your truck, you'll also need a tie-down hardware package consisting of turnbuckles, S-hooks, and chains (TDHP - sold separately). This hardware attaches the anchors on your camper to the tie-downs on your truck to keep your camper safely mounted. Once you tighten the turnbuckles to the correct level of tension (not too tight!), you'll be good to hit the road.
HSAB CR Brophy Heavy-Duty Tie Downs for Slide In Truck Camper - Black Powder Coated Steel - Camper Hold Down - Angled Design - 4 Pack
Installation Details
Customer Satisfaction Score:
90% were satisfied with this product
10% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
Brophy Slide In Camper Tie-Downs - Extra Clearance - No Drill Bed Mount - Qty 4 - HSAB
Average Customer Rating: 4.4 out of 5 stars (143 Customer Reviews)
The angled design of these tie-downs gives you extra clearance for attaching your turnbuckles, making them easy to use. Powder coated steel brackets clamp onto the side rails of your full-size pickup with no drilling required.by: Steve03/22/2024
Easy to put on they work perfectly very solid I have a 20-22 palomino SS 1251 truck camper Badland Edition doing a great job thank you a bunch
by: Teri04/04/2018
As always my order arrived early. The box was not in great shape but nothing was lost out the holes. Poor delivery guy could barely get it to the porch. I was surprised at how heavy they are. It took me about half an hour to get them installed. I have a 1995 Dodge Ram 2500. The shape of the inside of the truck was a pain to work around. I couldn't set the front tie downs as far forward as I would have liked, but it will work. Haven't got the camper yet but I'm sure they will be perfect. I have seen these on many pickups here in western Colorado. The installation video made my choice easy ...NO HOLES TO DRILL.
by: James07/09/2023
After installing the tie downs per the instructions I proceeded to connect a turnbuckle with chains and upon tightening it down the Brophy tie downs turned towards the camper connection point. In other words they would not tighten up.
by: Jeff R06/27/2014
I am so happy with your Angled Hold Downs. Especially how they clamp to the bed of my truck and I didn't have to drill any holes. They do a great job and I have no worries when the girls take it camping for the weekend... I do worry about the safety of my pickup though. hahaha
April
7/11/2014
Haha
by: Leo04/03/2024
The Brophy tie-downs work just as advertised. I am a recreational user of my camper - not full-time or long trips, and have had no issues with them. The only challenge is backing my truck under the camper with the brackets mounted - like threading a needle, because the leg stands barely clear the brackets. I have a 2-16 F-250 and a Northstar 650 and their is not enough clearance in the bed to add the brackets after the camper is in position. Again, this is not a problem with the brackets, its a camper leg/stand and bed width issue.
by: Matthew06/20/2023
Items in the box were not secure and clearly banged around during shipping. Box was torn in a number of places and resulted losing the T-bolts. I discovered Friday evening, and called etrailer the next morning. Person indicated you don't ship on Saturday but would go out Monday morning and she'd mark it priority. She indicated I could expect delivery on Tuesday or Wednesday. I received notice of the delivery on Friday as I was on the way to Canada fishing for a week. Needless to say I got creative and used pieces of 2x2 instead to leverage brackets to truck bed side. When I got home I looked at the T-bolts and think I will stick with the wood. There is no coating on the T-bolts so would likely damage the bed lining.
by: Jeremy03/23/2023
The product itself will do the job, after I spend some precious time to clean it up. I was amazed that all the individual parts and hardware made it, since the box was totally destroyed. All of the powder coating of the plates are badly scratched, down to raw metal, just from banging and sliding against each other. A couple corners of the thinner metal flanges are bent, too.
This package looked like it was drop-kicked down a flight of cement stairs in a fit of rage.
Unfortunately, I need this to work ASAP, and will repair and modify to suit my needs. Never mind how I feel, or the principal of the matter, but I feel some refund or discount is in order.
I’m sure it left Brophy’s manufacturing facility looking shiny and straight.
I’m sure they could improve their packaging.
I’m certainly sure that etrailer could indentify this obvious issue and take some steps of their own to maintain a happy clientele, like simply throwing it into another heavy box.
Jenny N.
3/24/2023
It certainly sounds like the tie downs did have a rough ride in shipping. Customer Service will reach out to you.
by: Devin05/24/2023
1) Poor quality product: The nuts for the bed clamp can't even be tightened all the way due to poor design, friction with the body of the clamp.
2) The neoprene pads referenced in the instructions weren't included in my package.
3) Fast shipping time and good communication from eTrailer
Jenny N.
5/26/2023
I know that these tie downs are considered to be more universal. The external bed rail cannot be more than 5.5 inches wide and there needs to be at least 2 inches of space under the lips of the rail. Would you be able to send a picture of how yours is installed? Just be sure that you do not have a double- wall or step side bed. I will have Customer Service reach out to you about the missing neoprene pads. We will have them sent out.
by: Walt 07/26/2023
Your service was great. The products I ordered arrived ahead of schedule. Also the tie downs look to be of great quality--very heavy, I can't wait to try them this weekend. The shipping box took a real beating. The packaging tape worked well at holding the box together. The only suggestion I have is that you might consider using a stronger cardboard box or reinforcing it somehow to withstand the handling of your products while being shipped.
by: Loretta 08/02/2023
the clamp ons didn't allow for the plastic cover over the truck bed rails to remain in place on the 2022 Nissan Frontier KC with 6' 1" box.
by: Excellent 05/02/2019
These tie downs worked great for my Toyota Tundra. I was securing a light weight camper.
by: H edward05/15/2016
I have a Sunlight, 8 foot, slide-in truck camper that I now carry in a 2015 Dodge 1500 Quad Cab. I use the Brophy angled tie downs for the front of the camper and Happijac bumper tie down for the rear. It took some tweeking and the right combination of hardware to connect the Brophy tie down to the camper but in the end it all came together and I'm very happy with the results. They are relatively easy to install and make a solid, safe tie down system. I would recommend them to a friend.
by: Andrew 05/10/2023
The ease of installation and the robust product makes this a great go to for truck camping.
by: Bob T.08/30/2013
I installed the angled camper hold-downs today and it took me all of fifteen minutes. I was impressed at how heavy-duty they are. I am very pleased with the product.
Bob T.
8/30/2014
Well, its been a year since I installed the hold-downs on my truck and I am still very satisfied with them. They have been in use several times and in fact I am leaving next week on a two week hunting trip to Colorado.
by: Paul V.05/06/2020
Product was easy to install, worked great. It held on some pretty knarly roads.
etrailer is a great company to work with as well.
by: Michael11/14/2023
The service was great and the staff was more than willing to help with any issues the only reason I gave it four stars was that the website was misleading
by: Gene03/17/2023
Good quality but to wide off bed doesn’t clear camper jacks
by: Erik 12/05/2023
Everything was correct to my order standard delivery was very fast
by: Wade02/03/2018
Really impressed with the product and installation was really simple good quality product I would recommend it to anyone
by: Gerry06/28/2020
Excellent product - super fast shipping - perfect fit for my 2019 Ram Turbo diesel 3/4 ton 4x4. Plenty of clearance.
by: Les 11/17/2023
Awesome quick shipping. Thanks now I can pick up my camper this weekend
by: Sheila 01/24/2023
If only all companies were as service driven as Etrailer! We have always been pleasantly amazed at how courteous and efficient they are, from taking the initial order to delivery and follow up. Friendly, earnest and fast!
by: Jeff 04/01/2023
Service was great but unfortunately didn't send hardware, still waiting
by: Tim mangni09/11/2019
Amazing service and fast shipping. We called looking for the best item to secure our camper to
Our pickup. They knew what would work best and we had it the next day.
25
143
Show More Reviews
See what our Experts say about this Brophy Camper Tie-Downs
- Installing a Truck Topper With Brophy Clamp On Camper Tie-Downs In PlaceThe Brophy Clamp On Camper Tie-Downs, # HSAB are 3/8" thick. So for a snug fit to your topper they will need to be removed or you will need to adjust for this dimension within the seal of where your topper comes into contact with the bed rails.
view full answer... - Truck Bed Camper Tie Downs For 1991 Dodge Ram 250Yes, you can use the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 # HSAB on a 1991 Dodge Ram 250.
view full answer... - Selecting Camper Tie-Downs For 2005 Ford F-150 Pickup TruckThere are some trucks that the Brophy Clamp On Camper Tie-Downs, part # HSAB will not fit and your 2005 F-150 is among that list. We do have tie-downs that will fit your truck but there are a few things that are required to make sure you get a good fit. I have attached a link to our product page for tie-downs you can check out. You will need to use the drop-down box and select your truck style based on the size of yoru truck bed, whether or not it has running boards or steps, and also...
view full answer... - How to Determine if Brophy Clamp On Camper Tie-Downs Fit 1999 Ram 2500 With 8 Foot BedIt is very likely the Brophy Clamp On Camper Tie-Downs - Bed Mount # HSAB will fit your 1999 Dodge Ram 2500 with an 8 foot bed, but because this is a universal fit, there isn't any specific fit information for your truck, though I can help you determine if they will. The Brophy tie-downs simply require your Ram's bed rails to be a maximum of 5-1/2" wide with at least 2" of space beneath the bed rail. Also keep in mind the tie-downs will not fit if your Ram has a drop-in bed liner, plastic...
view full answer...
- Will the Brophy Camper Tie-Downs Fit on a 2008 Nissan FrontierThe Brophy # HSAB are designed to be a universal fit on most trucks; as long as your bed rails aren't wider than 5-1/2" then you'll be able to use these camper tie downs on your 2008 Frontier without any issues. These are a nice solution to save money and with a smaller camper you may find that you don't need better tie-downs.
view full answer... - Can Brophy Camper Tie Downs Be Used with Bed Rail CoversYes, the Brophy camper tie downs like the # HSAB can be used with bed rail covers. If you check out the picture I attached you can see a set installed on a bed rail with plastic covers.
view full answer...
- Dimensions for Brophy Tie Down Kit part # HSAB and Fit for 2014 Ram 2500I attached a picture that has basically all of the dimensions you'd ever want for the Brophy Tie Down Kit part # HSAB. These will fit your 2014 Ram 2500. If you check out the install video I attached you'll see the kit installed on a similar full-size Ram as yours as well.
view full answer...
- Are the Brophy Clamp On Camper Tie-Downs Available in a Set of 2The Brophy Clamp On Camper Tie-Downs # HSAB are only available as a set of 4 (front and rear) tie-downs.
view full answer... - Mounting Surface to Turnbuckle Hole of Brophy Tie Down HSABThe distance from where the Camper Tie Down part # HSAB mounts to a bed rail to the center of the hole for the turnbuckle measures 11-1/4 inches.
view full answer...
- Will Brophy Camper Tie-Downs Work With Composite Bed On 2013 Toyota TacomaI was not able to see where these tie-downs are compatible with your Tacoma. One of the notes in the specs says it is not compatible with plastic bed rails, but I may have an option that will work for you. I have atatched a link to our product page that lists the camper tie-downs that are compatible with your truck. Just use the drop-down box and select the style truck you have and you can see if the tie-downs are what you are looking for. Or you can tell me if your truck is a 2WD or 4WD...
view full answer... - Inside Dimension of Brophy Clamp On Camper Tie-Downs HSABI went out to the warehouse to take a look at the Brophy Camp On Camper Tie-Downs # HSAB referenced in your question. From the tie-down where it will clamp onto the inside of the bed rails to the outermost part of the unit, I measured a distance of right at 11-1/2 inches. I have attached an image with this measurement labeled. As long as the jacks on your camper extend out further than this measurement, you will have no interference issues with these tie-downs. I have also attached a short...
view full answer...
- How to Determine if Brophy Clamp On Camper Tie-Downs HSAB Will Fit a 2016 Nissan Titan XDBrophy does not have a fit list for tie-downs # HSAB so you have to go by how they install. The external bed rail width cannot be more than 5-1/2 inches wide. There will need to be at least 2 inches space under the lip of the bed rail. And they are not compatible with double-wall or step-side beds (this last one I do not believe would apply your 2016 Nissan Titan XD). Another option is custom tie-downs, see link.
view full answer... - Do Brophy Slide-In Camper Tie-Downs Fit a DuallyYes, the Brophy Slide In Camper Tie-Downs # HSAB will fit a dually. They simply require your truck to have at least 2" between its sidewall and lip of the bed rail, and you can't have a drop-in bed liner, aftermarket bed rails, double-walled bed, or side-step bed.
view full answer... - Recommended Camper Tie-Downs For 2000 Dodge Ram 2500 TruckThe BROPHY Angled Hold-Downs for Truck Bed Campers, part # HSAB should work well for your 2000 Dodge Ram 2500. These tie-downs are not designed to work with trucks with drop-in bed liners, plastic bed rails, side-step beds, and double-wall beds, so if your truck doesn't have any of these features, the # HSAB tie-downs will be what you need.
view full answer... - Is Brophy Camper Tie Downs part # HSAB Only Sold in Quantity of 4At this time we only offer the Brophy Camper Tie Downs part # HSAB sold in a quantity of 4.
view full answer... - Brophy Clamp On Camper Tie-Down Placement The Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 Item # HSAB mount to the bed rail instead so you won't have any space issues with the running boards of your truck.
view full answer... - Will Brophy Camper Tie Downs # HSAB Fit 1997 Chevrolet K1500The Brophy camper tie downs # HSAB are pretty universal and should fit your 1997 Chevy K1500 pretty easily but you might measure the bed rails just to be sure. As long as you have 2 inches of space between the lip of the bed rails and the side of the bed you'd be good. Any drop in style bed liners or plastic bed rail covers would need to be removed or trimmed back. These don't have a specific capacity but Brophy says they will work well with any camper that is not larger than the bed of...
view full answer...
- Will Brophy Camper Tie Downs HSAB Fit 2015 Ford F-250Yes, the Brophy camper tie downs part # HSAB that you referenced are a confirmed fit for your 2015 Ford F-250 and will work great with your Arctic Fox 811.
view full answer... - Installing Brophy Clamp On Camper Tie-Downs On A RAM 2500 The reason the manufacturers of the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 Item # HSAB have the plastic bed rail exemption is because depending on the thickness of the plastic bed rail you might not have enough space to install the inner triangle shaped plate that secures the the tie-downs to the lip properly and the plastic bed rail could cause the tie-downs to slide side to side. If you do use these with the plastic bed rails still on you would...
view full answer... - Install Instructions for Brophy Tie Downs # HSAB Installed in 2001 Ford F-150I attached a picture that shows the instructions we have for the Tie Downs part # HSAB that you referenced. We've haven't seen them be an issue on a 2001 Ford F-150, but if you could get me a picture of what your setup looks like I can see if there's something I can see that's not right.
view full answer...
- Will Brophy Camper Tie-Downs Work In A 2011 Ford F-150 The Brophy Slide In Camper Tie-Downs # HSAB might be a fit for your 2011 Ford F-150 but you'll need to do a bit of measuring first and you'll likely need to trim out holes where the tie-downs would sit. You'll want to verify that # HSAB brackets can clear the sides of the bed based on the dimensions I've pictured below. You'll need a minimum of 2" between the sidewall and lip of bed rail in order for these to mount properly. The liner can be trimmed out just enough to for the brackets to...
view full answer...
- Is Brophy Clamp On Camper Tie-Downs Item # HSAB Compatible With A Ford F-150 RaptorI contacted Brophy and determined that Item # HSAB is compatible with your 2012 Ford F-150 Raptor as long as the bed rail does not exceed a width of 5-1/2". I also recommend the Brophy Basic Turnbuckles Item # TDHP to go with the tie downs to secure the camper down. If your rails are wider than 5-1/2" you would have to go with a frame mounted tie down. I have included a link to the page of the 3 different options for the frame mounted tie downs. Make sure, if you must go this route, to...
view full answer... - Will Brophy Clamp-On Tie-Downs Accommodate A 2,400lb Truck Bed Camper While there isn't a specific weight capacity for the Brophy Clamp On Camper Tie-Downs # HSAB there is a 3,000lb capacity for the turnbuckles # TDHP that go along with these tie-downs. To ensure fitment of these tie-downs your truck will need to meet the following criteria: External bed rail width cannot exceed 5-1/2" Requires at least 2" of space beneath lip of bed rail Not compatible with drop-in bed liners, plastic bed rails, double-walled beds, or side-step beds
view full answer... - Will Brophy Angled Hold-Downs Fit a 2015 Chevy Silverado 1500The Angled Hold-Downs # HSAB do not have a specific vehicle fit list but they are likely to fit your 2015 Chevy Silverado 1500. Installation of the hold-downs requires a minimum of 2" of clearance between the inside of the truck's sidewall and the inner lip of the sidewall. You will also need hardware package # TDHP. The best option for camper tie downs is frame mounted custom tie downs. I included a link to the ones that fit the 2015 Chevy Silverado 1500. Use the drop down menu to select...
view full answer...
Do you have a question about this Camper Tie-Down?
Used Items Available
Condition: Installed
Notes: Item has been installed/test fit.
Condition: Installed
Notes: Item has been installed/test fit.
Condition: Surface Scratches
Notes: Parts are badly scratched throughout, strictly cosmetic.
Condition: Surface Scratches
Notes: Item has minor cosmetic scratches and paint chips. Otherwise new and unused.
Info for this part was:
Edited by:
Leah B
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Rachelle B
Video Edited:
Dustin K
Installed by:
Cole B
Installed by:
Hayden R
Updated by:
Amanda M
Updated by:
Amanda K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
7/12/2023
I wanted to ask if you can send a picture of how the tie downs are installed. I want to help to make sure that you can use the tie downs.