To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Easily mount a Vision X LED light bar to the front of your GMC Sierra 2500, even if you don't have a grille guard. This sturdy steel bracket installs behind your license plate and holds light bars up to 20" long.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to review part number XIL-LICENSEP. This is the Vision X License Plate Mounting Bracket for Vision X Light Bars up to 20 inches long. Now, this bracket will let you mount a Vision X LED light bar, that we do sell separately, above or below your vehicle's license plate. It does work with the Xmitter, the Xmitter Prime, the Xmitter Prime Xtreme, Xmitter LoPro Prime Xtreme, the Evo Prime, or the Reflex light bars up to 20 inches long. It has a durable, black powder coated steel construction. It's an easy, no-drill installation.
This will mount directly behind your license plate using the existing hardware on your vehicle. You could flip it to either mount your light bar above or below the license plate. This is made in the USA and it does have a one year warranty. Just to give you an idea, I have an example of a Xmitter LoPro Xtreme bar here. It happens to be a 9 .. It's 12 inches long, it's a 9 LED.
Basically, what you would do is you could mount it just like this. Above, let's put that in there, there we go. You can mount it just like that above or just to show you below, you flip this over. You could actually mount it just like this below the license plate frame, either way. That should do it for the review on part number XIL-LICENSEP. The Vision X License Plate Mounting Bracket for the Vision X Light Bars up to 20 inches long.
.
Average Customer Rating: 3.5 out of 5 stars (2 Customer Reviews)
Easily mount a Vision X LED light bar to the front of your vehicle, even if you don't have a grille guard. This sturdy steel bracket installs behind your license plate and holds light bars up to 20" long.Very strong sturdy plate for mounting license plate and fog lights. Would recommend for many users mine on front of 32 ft motor home.
Way too heavy. Actually had to remove the bumper cover, to mount the plate securely with broad washers on both sides, after it torqued the original plate screws out of the cover, and I used (5)
Do you have a question about this Off Road Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.