Timbren Rear Suspension Enhancement System
Item # TGMRCK15S
Retail:$316.90
Our Price: $269.36
You Save: $47.54
Confirmed to Fit
2005 GMC Sierra
1500 LD
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (5981)
- Q & A (0)
- Photos
2005 GMC Sierra - Timbren Rear Suspension Enhancement System
- Jounce-Style Springs
- Rear Axle Suspension Enhancement
- Extra Heavy Duty
- Timbren
8,600-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your GMC Sierra. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Features:
- Improves suspension, handling, and safety
- Provides additional support as needed so you always have a smooth, comfortable ride
- Allows the leaf spring ample movement while cushioning light loads
- Becomes more rigid as more weight is added
- Increases stability - providing great performance while hauling heavy loads
- Reduces vehicle sag
- Works independently - side-to-side
- Helps compensate for off-center loads
- Reduces body roll when swerving and turning corners
- Acts as shock absorbers, taking the brunt of bumps and rough roads
- Extends the life of your vehicle's suspension
- Includes 2 Aeon hollow rubber springs, vehicle-specific brackets and hardware for simple installation
- Replaces axle bump stops on frame
- No drilling required
Specs:
- Capacity: 8,600 lbs
- Do not exceed the vehicle's weight-carrying capacity
- Limited lifetime warranty
- Satisfaction guarantee
Whether you're hauling heavy loads in your bed or cargo area or you're towing a trailer, you will often see the rear of your vehicle sag while the front end rises. In these cases, the rear axle is handling not only the weight of the cargo, but also more of the vehicle's weight. Because less weight is on the front axle, the front tires are making less contact with the road. Overall handling - traction, steering, and braking - is negatively affected. But the resistance from Timbren's Suspension Enhancement System works with your factory suspension to keep your vehicle level and improve your driving experience.
The Timbren system comes with custom-fit brackets that are bolted onto each frame rail above the rear axle. Hollow rubber springs are bolted to the bottom of the bracket and hang down to where the bottom of the spring sits, 1" above the axle. The inch of clearance allows the existing factory suspension to operate normally under light loads and standard terrain, ensuring the smooth, comfortable ride that you are used to.
Timbren Suspension Enhancement Systems are designed to work progressively. When the hollow rubber springs are compressed, the convoluted design causes them to quickly collapse along the folds. Once the folds are compacted, the stacked barrel shape increases resistance, stiffening the suspension and keeping your vehicle level.
Each hollow rubber spring works independently to support the driver's side or passenger's side of your vehicle. This is helpful when you swerve or make sharp turns. Each spring is activated when it is needed, so body roll is greatly reduced. The independent action also works well when you are hauling off-center loads.
Because the vehicle handles better with the springs, less turbulence will be passed along to the trailer, and this helps to keep the trailer in line. Your driving comfort is further enhanced if the trailer does begin to sway (from a gust of wind or a passing semi), because the movement from the trailer is not transferred to your vehicle. This also works to make the sway subside more quickly.
Another great feature of the rubber construction is that the springs absorb most of the road shock, creating a smoother, more stable ride overall. Wear and tear on the factory suspension is also lessened because the rubber springs work to prevent bottoming out on rough roads.
Timbren Suspension Enhancement Compared to the Competition
Timbren's Suspension Enhancement Systems are much easier to install than air springs - there are no air hoses to run, no compressors or gauges to hook up, and no manual adjustments to make. The rubber construction makes Timbren's springs more elastic than similar products constructed of microcellular urethane. And more elasticity allows for a more comfortable ride because the rubber has more travel.
GMRCK15S - Rear Suspension Enhancement System with Aeon Hollow Rubber Springs by Timbren
Replaces Timbren TGMRCK15E
Installation Details
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Timbren Rear Suspension Enhancement System - TGMRCK15S
Average Customer Rating: 4.7 out of 5 stars (5978 Customer Reviews)
8,600-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.by: John Z04/19/2023
2018 GMC Sierra 1500
I know it will be lovely when loaded or the trailer on. However,it rides like a wagon empty with brand new premium shocks and struts empty. Thud thud thud. You really cannot feel the shocks or suspension. Found exact same item plentiful for 60 bucks on eBay after I bought these for 250. I may cut these in half or put air bag on. I do not like the ride empty. No hard feelings. It is a good product maybe just not for me.
John Z.
4/26/2024
It serves its purpose especially when hauling. I got use to thumps except when on a wavy or rough road. Zero maintenance unlike more expensive air bag. Seem to be holding up well so far. No more whining.
by: Andy 04/12/2024
They do a very good job of stabilizing the rear axle of the truck when under a heavy load. Towed a 6000 lb travel trailer this week with no load leveling or anti sway bars (helping a friend). The 1500 Silverado equipped with the Timbren system did an excellent job towing the trailer.
by: Larry S.10/16/2016
2013 Chevrolet Silverado
From Mickey Mouse to Mighty Mouse in minutes. Pulling a 7700lb travel trailer with a 2013 Silverado w/ tow package and h/d cooling. Even with W/D hitch truck was bouncing uncomfortably. The Timbrens were an instant fix. Dips in the road are no longer a problem, and I think the sway control in the hitch seems to feel more solid as well. Unloaded ride is unchanged except for really major dips (and Texas roads have a few). If you are like me and take your truck to places your Mom would not recommend, a good underbody wash and glasses to catch any falling junk during the install are highly valued
Larry S.
10/17/2017
Still a happy camper after a year, and rolling along comfortably. Towing time has increased and timbrens still smooth.
by: Frank06/18/2020
This Rear Suspension Enhancement kit were so easy to install, I was almost sure I missed something.
They installed in less than an hour. I was able to place my floor jack under the ball mount to raise the rear end enough to remove the old mounts and simply install the new ones.
Hooked up my 28' rv to my Silverado 1500 and they worked as advertised. No front end sag and I feel safer towing it.
Customer service helped me find the right product I needed without dishing out a lot of cash!
Frank
6/19/2021
While I have sold this vehicle since this review to my neighbor, she has told me she loves this product when she pulls her rv. I now have a 34 ton pick up and purchased a set for it. I am very satisfied with the Enhancers i purchased for it!
by: Todd06/12/2019
2014 Chevrolet Silverado
I have a 2014 Silverado 1500 and 24’ gooseneck weekender horse trailer. I just got the trailer and the guy I got it from recommended the Timbren’s to me. When I first dropped the trailer on my truck empty it squatted me 4.5” in the rear. The trailer weighs just under 5,000 pounds empty. When I first pulled the trailer empty I wasn’t sure about the Timbren’s they seemed really bouncy on my road. My road is not the smoothest road though. This past weekend I loaded 3 horses into my trailer and traveled about 1.5 hours away and I was blown away at how well my truck drove and handled fully loaded. With the Timbren’s my truck barely squats now. The trailer rode a hundred times better loaded with horses, which most big trailers ride bad when empty anyway. As far as driving with no load at all the truck rides just like normal. However if you hit a big hump in the road sometimes it will be enough to make it hit the Timbren’s and gives a little jolt. As far as recommending I definitely recommend these especially if you have a 1/2 ton truck and pulling a fairly heavy load.
by: David07/03/2021
2021 GMC Sierra 1500
I just installed these on my 2021 GMC Sierra 1500 AT4. It was really easily done and only took .5 hour total. Because the AT4 is slightly lifted I did use the spacers review separately. I am towing a pretty heavy 2 axle horse trailer with a tongue weight between 6000 and 7000 pounds which the truck can handle. When I hitched up with the original bump stops the hitch dropped 4", the frame over the rear tires squatted down 2 and 3 quarters " and the frame over the front tires lifted 3 quarters". After the installation the hitch dropped only 2 and 3 quarters", the frame over the rear tires squatted down 1 inch" and the frame over the front tires lifted . Test drive went well with the same smooth ride with no load as there is no contact. Pulling the trailer went just perfect, no sway due to the trailer design, and the load was very stable with very little bounce.
by: Steve04/10/2020
2020 GMC Sierra 1500
I can't wait to use these and see how they actually work with my 29' x 7.5' wide snowmobile trailer.
For reference to those with an AT-4 GMC, I have a 2020 and with a 1/2" spacer and the timbren (it was actually only 4 1/2" tall, not 5" like the images showed) have about 1.25" gap between the bottom of the timbren and the axle stop when unloaded. I was under the impression that the timbren itself was 5" based on the image in the kit on the website, #tgmrck15s, so I'm a 1/2" shorter than I wanted but I will run it for a while and see how it looks when loaded with my trailer before going any thicker with a spacer.
by: Brandon03/24/2018
2011 GMCSierra
Added these Timbrens with two 1" spacers on each side on a 2011 GMC Sierra with a 2" lift. Fit great, easy to install. Was more work getting old bump stops off than installing the new Timbrens with spacers. I did need to get 2" longer bolts than what was included to complete the install, but that was to be expected.
by: Bryan Hanselman04/30/2013
Etrailer expedited the package early due to returning customer. Parts delivered in double packaged boxes. Installed in 1/2 hour after fighting the old rusty bolts. Have not had a chance to load test yet. Will give another follow-up review after truck and trailer are loaded.
by: Jesse G 06/06/2018
2014 Chevrolet Silverado 1500
Great product easy to install, took me longer to take the tire off and on than install the product. I hooked up the truck to the trailer and before it stood at 39 inches and when hooked up it dropped to 37 1/2 from the floor to the wheel weld. Overall ride is comfortable with an empty truck load. Purchesed Sunday and was delivered by Wednesday. Great product
by: Gary07/08/2021
2019 Chevrolet Silverado 1500
Real nice product. Added them to my 2019 Silverado to better support my 6000 Lbs Travel Trailer. They are a big improvement over the stock bumpers.
by: Flavius04/13/2024
Was very easy to install and the instructions were easy to understand.
Thank you
by: Joe03/21/2021
I have a 2018 GMC Sierra 1500 pick up truck (elevation package) in which I added a 3.5 inch ROUGH COUNTRY KNUCKLE LIFT KIT with Front Struts. The rear distance between the bump stop's metal cup just under the frame and the the rear axle is 8.25 inches with an empty truck bed and a quarter tank of gas. I gave the professional this information on my truck and what I needed; they e mailed back the kit with only 1.5 additional spacers on each side of the truck, Ok. I still came up with 2.25 inch space with an empty truck bed on both sides. I feel More TIMBREN PRODUCTS WOULD be SOLD if websites carried information All together for the average people to buy at their finger tips. It would have been easier for me if the following were all grouped together for my truck :
TIMBREN Rear Suspension Enhancement System
TGMRCK15S (that has 3/8 bushing) which is actual about 4.5 inches not 5inches in
height.
FOR TRUCKS with LIFT KITS spacers are required with the same 3/8 bushings
1 inch spacer (that has 3/8 bushing) A25723-90AHOO
1/2 inch spacer (that has a 3/8 bushing) TA25722-90POO
I required an additional 1 inch spacer on both sides than I was e mailed. It would also be easier if I could buy the additional bolts grouped with my additional 2.5 spacing on both sides of my truck on the web site, than going to the hardware store. I would pay the additional cost. So all together for my 3.5 ROUGH COUNTRY LIFT, I required 2.5 inch spacers on both sides with the 4.5 height kit which = 7 inches . I haul my 4 wheeler in the bed and broke a level spring years ago. On other occasions I place fire wood in the truck bed. TIMBREN is the way to go, it will be there when I put weight in the bed of truck; be it a 4 wheeler or wood. Friends of mine have air bag systems that leak over time and are much more in price. You can not go wrong with TIMBREN. When installing, remove salt and sand near top of original bump stop bolt, apply PB blast wait 10 minutes use a breaker bar with easy removal. Go to the hardware store to get longer bolts. When installing have to jack up the back of the truck under the towing package to get space to use tools to add new TIMBREN PRODUCTS.
Joe
3/23/2022
Awesome for hauling four wheeler in bed and for hauling load of fire wood in the bed, no broken leaf springs and no sag
by: Steve N.11/26/2016
2015 GMCSierra
Received yesterday (quick shipping!), installed today on 2015 GMC Sierra 1500 4WD Crew Cab short box. What a difference between the Timbren's and OEM bump stop from GMC. Installed for towing large travel trailer. Used floor jack under rear hitch to raise up truck to get enough room for socket to install bolts. Use 10mm socket to remove OEM bolt & bump stop, use 17MM socket to install new bolt and Timbren. Very east installation process.
by: Mark 06/06/2020
Even using equalizing bars, I was experiencing "motorboating" when towing our travel trailer. I've had several air bag setups in the past and have always had to add air daily, so I bought the pair of Timbren suspension enhancement blocks.
Mounting took about 20 minutes.
The Timbren blocks stopped the "motorboating."
Another benefit, is my ride stays as factory without messing with air pressure at all.
Also, now I'm able to move my travel trailer short distances without installing the equalizing bars at all. My pickup stays nice and level.
Mark
6/7/2021
The Timbren blocks are working out great! The only negative is that there is only a couple inches of freeboard travel brfore the axle contacts the blocks. When there is no load, bumps like speed bumps are a bit harsher than before. I guess that is to be expected though. Even with this slight increase in unloaded harshness, I still give this product five stars.
by: Mike06/18/2020
Installed these on my 2016 Silverado. Gained almost 3/4 inch in suspension height back with a 26 foot travel trailer on the back. Much nicer ride as well. I’ll be getting them for the front when I get a plow. Very easy to install too.
by: Benjamin Lloyd06/19/2020
2013 Chevrolet Silverado
Install was straight forward; the old stops fought me a bit- a few shots of PB helped. Great install videos on your website to help me. Looking forward to towing my camper with the Timbren’s installed! I decreased 1 1/2” of rear end squat when I hooked onto my 7000 lb camper (before attaching my weight distribution bars.)
Thanks!
by: Allen04/14/2022
Good customer service poor shipping box came open
Jenny N.
4/21/2022
I will have our Customer Service team reach out to you.
by: Gary B.12/08/2016
Very happy with my timbrens and the prompt order and delivery of them. I have them installed and look forward to towing my trailer next week. Thank you.
by: Michael W01/21/2015
2014 GMC Sierra 1500
I installed this product to help level my 2014 GMC 1500/4x4 when towing a 18ft trailer. They work great and yes I would buy them again. However it will stiffing the ride of your vehicle with no load. If you do not use your truck a lot to carry or pull loads you may not like them. They work just as instructed by the company. Took me only 15 mins to install and a good looking product.
by: Christopher05/06/2022
It's okay. I believe I'm going to replace it with an air bag system though, as currently every time I hit a bump the springs make the small gap to the top of these and I'm always hitting the bump stops.
Jenny N.
5/9/2022
You mentioned that when hitting a bump a gap appears above the springs. Would be able to send a picture?
Christopher
5/9/2022
There is always a gap above the springs, they do not contact the leaf spring while the truck is resting. It is just small enough of a gap that any bump I do hit makes the leaf spring contact the Timbren jounce spring, which has the same sound effect as hitting a bump stop.
Jenny N.
5/9/2022
My apologies as I was thinking that you meant that there was a gap at the top of the Timbren bump stop verses at the bottom between the bump stop and the springs. Of course, there should be a 0.5 inch to 1.5 inch gap and some people feel like it creates a stiffer ride when the truck is not loaded. I think this is what you are experiencing. I would recommend taking a look at part # AL57288 for your 2021 GMC Sierra 1500 with 4 WD. There are a few tech tips to consider with this kit. It will not fit with vehicles equipped with Adaptive Ride Control or the AT4 models.
by: JerryInLodiCA04/01/2023
The units were installed quickly made especially easy because of the printed instructions which accurately described what to do and the correct socket sizes of the bolt heads. After installing we pulled our small travel trailer from Central California to Quebec, Canada, and back with no problems, a distance of over 8,000 miles.
by: Bruce02/26/2018
This has proved perfect for my application of towing our yacht. Leveled it up perfectly. Installed just as instructed.
by: Gregory05/26/2021
I bought the wrong product--these did not solve the problem I was faced with--no fault of Timbren. They did work as designed, and were easy to install. I had hoped they would help control the galloping problem I was having when towing my travel trailer--but instead they caused a noticeable "thump" every time we went over a bump or an undulation in the road while the galloping continued. I simply did not have enough rear suspension to handle the trailer tongue weight (even though I was within payload limit at the scale). Solution turned out to be a bigger truck, lesson learned.
by: Jim06/24/2021
Didn't like the ride at all, didn't really help my truck. Had it on for 1 day then went back to stock. Very rough ride, didn’t matter if I was pulling a trailer or not. Used them very little,they’re sitting on my shelf. What a waste of money.
Heather A.
7/3/2021
Thank you for your review. The Timbrens are made of dense rubber and designed for heavy duty applications so they can create a rougher ride if there is not weight on them. You may consider trying the SumoSprings part # SS45MR which are designed to compress easily under a lighter load.
25
3794
Show More Reviews
See what our Experts say about this Timbren Vehicle Suspension
- Helper Springs for a 2014 Chevy Silverado 1500 Z71 LTFor the type of loads that you are carrying in your 2014 Chevy Silverado 1500 Z71 I recommend Timbren helper springs # TGMRCK15S. There is no maintenance required with these springs and they will prevent that rear end sag you are experiencing. And they have a limited lifetime warranty. Several of the guys here use these springs and they love them because they are so easy to use. Just install them and you are done. No need to worry about adding or removing air or possible leaks in air bags....
view full answer... - Do You Recommend the Timbrens or Roadmaster Active Suspension for My 2021 Chevy Silverado 1500?As for comparing the Timbrens # TGMRCK15S to the Roadmaster Active Suspension Custom Leaf Spring Enhancement Kit # RAS54FR on your 2021 Chevy Silverado 1500 (4x4), the answer really depends on how much you tow or need suspension support for your Chevy. The Timbrens will do a great job for semi-regular towing or support, but if you are a regular tower I recommend going with the Roadmaster Active Suspension # RAS4611. The reason is because the force put on your Chevy's springs when towing,...
view full answer... - Rear Suspension Helper Spring Recommended for 2021 Chevy Silverado 1500 With Pop-Up In-Bed CamperWhat does your truck camper weigh? I'd personally prefer using the SumoSprings # SS45FR Solo helper springs. These are made of a more pliable material than the Timbren springs, which means better ride quality when the camper isn't in the truck bed. If the pop-up camper weighs less than 1500 lbs or not much more than that, the 1500 lbs of extra support that the # SS45FR SumoSprings provide would be ideal. Keep in mind though, this option doesn't fit vehicles with the adaptive ride control...
view full answer... - Correct Timbren Rear Suspension Enhancement System for a 2021 GMC Sierra 1500 with AT4The correct Timbren Rear Suspension Enhancement System for a 2021 GMC Sierra 1500 with AT4 is part # TGMRCK15S. This is a complete kit that comes with everything you need and is a confirmed fit from the manufacturer for AT4 models.
view full answer... - Spacer Kit For A # TGMRCK15S On A 2015 GMC Sierra 1500There are spacers available for The Timbren Rear Suspension Enhancement System # TGMRCK15S on your 2015 GMC Sierra 1500. Depending on what your bushing size is we have two options: If you have a 1/2 inch bushing The Spacer # TA25723-90AD00 is needed. If you have a 3/8 inch bushing The Spacer # A25723-90AH00 is needed. The Timbren System # TGMRCK15S will improve your vehicle's suspension, handling, and safety. They work independently - side-to-side. They have a weight capacity up to...
view full answer... - Timbrens For 2017 GMC Sierra That's a really good question. I got a hold of my contact at Timbren, unfortunately they told me that each kit is designed to work specifically for that truck. So if your Sierra does not have magneride, you will want to use # TGMRCK15S, and if you do have magneride use part # TGMRCK15MR. Each kit is compatible with both 2WD and 4WD. While the spring may bolt up and thread on, each kit has different shaped springs, heights, and designed to work with the truck's factory suspension. So it...
view full answer... - Timbren Suspension Enhancement System for 2007 Silverado 1500The part # you mentioned, TGMRTT35C is intended for use on the 2500 or 3500 cab and chassis model only. If your 2007 Silverado 1500 is the LD model, use part # TGMRCK15S. If you have the HD model, you would need part # TGMRCK25S. The Timbren Suspension Enhancement System is pretty simple to install. For your convenience, I will include links below for the installation instructions.
view full answer... - Can Helper Springs be Installed on a 2015 GMC Sierra Denali 1500 with Magnetic Ride ShocksIf the magnetic shocks are on the rear axle of your 2015 GMC Sierra Denali 1500 then an air bag product such as # F2430 will not work because it is meant to mount above a leaf spring stack and the shocks are likely in the way. I have linked a video showing installation and a link to the instructions for you to compare to your truck to determine if there would be a fit issue. The magnetic shocks are supposed to adjust themselves according to what is required to provide the best ride. This...
view full answer... - Rear Helper Springs for a 2002 GMC Sierra 4x4 1500 LD Extended CabThe ideal way to prevent rear end sag when towing a trailer is to use weight distribution. Helper springs are designed for loads carried in the truck which is why they aren't the best option for this situation. But I will give you both options. First since you are interested in helper springs we can look at those first. The SumoSprings # SSR-209-40 could work but the trailer, if heavy enough, could still cause squat. A stiffer systems such as Timbren springs # TGMRCK15S (for the 3-door...
view full answer... - Timbren Rear Suspension Enhancement Package ContentsThe Timbren Rear Suspension Enhancement System # TGMRCK15S comes with 2 of the Aeon springs for both wheels on your rear axle, vehicle specific brackets and the mounting hardware.
view full answer... - Timbren Suspension System Recommendation for a 2014 GMC Sierra 1500The difference between the two Timbren systems you referenced is the application for each. The Timbren Rear Suspension Enhancement System - Severe Duty # TGMRTT15S is designed for service vehicles only so it would not work for you. The # TGMRCK15S would make an excellent choice for a suspension enhancement system for your vehicle. This system has plenty of capacity for the ton of pellets you carried, and is great because when your vehicle is unloaded your ride quality will be exactly the...
view full answer... - Suspension Enhancement Recommendation for 2018 GMC Sierra 1500 with 5th Wheel HitchAn "in-bed" hitch refers to a gooseneck or fifth wheel trailer hitch setup like you have in your 2018 GMC Sierra 1500. Since none of the air bag kits we offer for your truck are compatible with in-bed hitches your best option is going to be a jounce spring style of suspension kit like the # TGMRCK15S which fits if you do NOT have the Magneride suspension or the part # TGMRCK15MR for if you DO have the Magneride suspension. Some people will attempt to modify the brackets of air bag kits...
view full answer... - What Are The Differences Between The Timbren TGMRCK15S And TGMR15MR For A 2021 GMC Sierra 1500These two Timbren rear suspension systems are the same except for two major differences. They are both compatible with your 2021 GMC Sierra 1500. They are each rated at 8,600 lbs and are rated extra heavy duty. The differences are the Timbren Rear Suspension Enhancement System, part # TGMRCK15S, is jounce-style spring that replace axle bump stops on your frame and it does NOT fit vehicle's with equipped with Adaptive Ride Control. While the Timbren Suspension Enhancement System - Rear Axle,...
view full answer... - Suspension Enhancement Recommendation to Eliminate Rear Sag in 2004 Chevy Silverado When TowingI'd recommend going with the Timbren Aeon spring suspension system, part # TGMRCK15S. These replace the factory jounce bumpers. The springs only come into play when the rear suspension is compressed, so they won't change the ride when you're not towing. The springs get progressively stiffer as more weight is added, and the system is compatible with all in-bed hitch set-ups unlike air bag systems. Also unlike air bag systems, there's no need to worry about leaky air bars or lines. Because...
view full answer... - Timbrens or RoadActive Suspension for 2020 Chevy Silverado 1500So just to answer the first part of the question, since you don't have a lift on your 2020 Chevy Silverado 1500 you do not need a spacer to use the Timbren Rear Suspension Enhancement System # TGMRCK15S. As for comparing the Timbrens to the RoadActive Suspension Custom Leaf Spring Enhancement Kit # RAS4611, the answer really depends on how much you tow or need suspension support for your Chevy. The Timbrens will do a great job for semi-regular towing or support, but if you are a regular...
view full answer... - Which Timbren Kit Fits 2018 Chevrolet Silverado 1500 without MagneRideWe have a Timbren kit that fits your 2018 Chevy Silverado 1500 without MagneRide but the part # TGMRCK15MR is the version that is for the Magneride. So instead what you'd want is the part # TGMRCK15S.
view full answer... - Fifth Wheel Rail Kit and Suspension Enhancement Recommendation for a 2015 GMC Sierra 1500 Short BedThe Firestone Ride-Rite Air Helper Springs, part # F2430 is a fit for your 2015 GMC Sierra 1500. The installation on your truck would be the same as you see in the video on the 2011 Silverado. As far as interfering with the installation of the fifth wheel rails, I spoke with my contacts at both Firestone and Reese about the two components. Since manufacturers will not test fit their product with another manufacturer's products they both said that it depends on the other company installation...
view full answer... - Height and Width of the Timbren Rear Suspension Enhancement System TGMRCK15SI went out to the warehouse and pulled Timbren kit # TGMRCK15S to take some measurements for you. The overall height of the spring is 5-1/8 inches and the overall width is 4 inches (diameter).
view full answer... - Suspension Enhancement Recommendation for 2016 Chevy Silverado 1500 with Curt 5th Wheel RailsI have a suspension enhancement solution for your 2016 Chevy Silverado 1500 but none of the air bag kits are a confirmed fit. What will work great instead is a Timbren kit part # TGMRCK15S which is a confirmed fit for your vehicle and due to the way it installs does not interfere with fifth wheel install rails.
view full answer... - Which Jounce-Style Suspension Enhancement Should I Install On 2020 Chevy Silverado 1500 Non Mag RideThe Timbren and Sumo Spring suspension enhancement systems use a jounce-style spring which is an excellent choice for leveling out your truck and trailer, all while improving handling and reducing trailer sway. They simply replace your factory bump stops and require a simple bolt-in installation process. The SumoSprings Solo Custom Helper Springs - Rear Axle # SS45FR are confirmed to fit your 2020 Chevrolet Silverado 1500 but this only has a 1,500lb weight capacity for the rear of your...
view full answer... - Availability of Timbren Rear Suspension System For 2011 Chevrolet Silverado 1500 4WDThe Timbren Rear Suspension Enhancement System, part # TGMRCK15S, is for the rear of your 2011 Chevrolet Silverado 1500 4WD. I am including a link to the installation instructions for you
view full answer... - How to Remove Rear Axle Bump Stops on 2014 Chevy Silverado 1500 4x4All of the Timbren and other rear-axle jounce-spring kits we have for your 2014 Chevrolet Silverado 1500 4x4, shown on the linked page, feature a bolt-on installation. If you refer to the linked page for Timbren kit # TGMRCK15S you will see in the product image photos three diagrams showing different installation methods, including the one I linked for you, which shows a cup-type mount as found on 2007-2008 model years. Your truck should be a bolt on, however. A socket extension will be...
view full answer...
- Suspension Enhancement System for a 2022 GMC Sierra 1500 Yes, there are Timbren systems available for your 2022 GMC Sierra. For hauling dirt and rock in the back of the bed of your truck I recommend the Timbren Rear Suspension Enhancement System item # TGMRCK15S. These hollow springs sit above your rear axle and have a 8,600 lbs capacity. They will keep your suspension from sagging when you are hauling a heavy load. I have attached an installation video and linked the instructions.
view full answer...
Do you have a question about this Vehicle Suspension?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Chris R
Video by:
Andrew K
Video by:
Jonathan Y
Test Fit:
Nicholas E
Test Fit:
Robert C
Test Fit:
Kevin C
Installed by:
Cole B
Updated by:
Mary K
Updated by:
Wilson B
Updated by:
Anna W
Updated by:
Michael B
Updated by:
Carrie F
Updated by:
Bethann B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Brooke M.
5/12/2023
Dont cut the springs, if you havent already! Doing so would void your warranty. The Timbren springs will definitely make for a rough ride when driving unloaded. If you arent constantly hauling, I wouldnt go with Timbren. I want to suggest part # SS45MR. These SumoSprings are a one and done install like your Timbrens but they are made from a much softer material compared to the hard rubber of the Timbren. They also have a similar price point. These will go on like the Timbrens and engage underload, but riding unloaded will be a much more enjoyable experience with the SumpSprings.