Monitors Specs:
Features:
Plug this monitor into your vehicle's OBD-II port to get parameters (PIDs), diagnostic trouble codes (DTCs), MPG stats, and engine performance tests. Slim case has a hi-res color screen and 6-button control with user-friendly d-pad.
More Information >Videos
for Performance Chip
Help Articles
for Performance Chip
Expert Answers
for Performance Chip
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...The Superchips Flashpaq F5 Pro Programmer #SU4845 that you referenced is a fit for your 2012 Ford Mustang 5.0 liter and can give the vehicle the vehicle up to 35 horsepower and 40 ft lbs of torque. A cold air intake would work just fine with this…
view full answer...The Edge Pulsar programmer and monitor part #EP54KR can give you up to an additional 136 horsepower and 291 ft lbs of torque.
view full answer...The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…
view full answer...No, the Edge Pulsar V3 L5P Inline Tuner #EP54KR will not give fuel economy gains. With the newer trucks have emission devices there is not much improvement in the MPG while using the tuner. The tuner has a high idle adjustment between 700 to 1500…
view full answer...Thanks for reaching out, Ben! Yes, the Redarc Tow-Pro Liberty Brake Controller #RED24FR is compatible with your 2024 Toyota 4Runner. You can install this using the Plug-and-Play Wiring Harness #RED49FR and the Mounting Panel #331-TPSI-002. I'm…
view full answer...I definitely recommend adjusting your 2022 GMC Sierra 3500 back to the factory settings and then potentially removing the Edge Pulsar V3 L5P Inline Tuner #EP82AR prior to taking it in to a dealer for service. I'm not sure if it will do anything…
view full answer...The Insight CTS3 Monitor that comes with the Edge Pulsar V3 L5P in the kit #EP54KR is nice because it helps to make adjustments easier but you can just use the Edge Pulsar V3 L5P Inline Tuner #EP82AR on it's own if that's the route you want…
view full answer...there isn't really a specific capacity or anything when in the various tow modes of SuperChips Flashpaq tuner #SU1845. You are still limited to whatever the truck can tow according to its owners manual. You would also have to follow the…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...Hey Chip! If you're dealing with that much sway, I would recommend a weight distribution system not one of the SumoSpring systems. I recommend the Fastway e2 Weight Distribution w/ 2-Point Sway Control item #FA92-00-0450. This system is built for…
view full answer...Filter Products (1)