2017 Nissan Altima Catalytic Converters

For your 1996 Chrysler Intrepid we have the Drivers Side Front #MF50205 and Passenger Side Front #MF50204 direct fit catalytic converters. These will fit both the 3.3L and 3.5L engines. We do also have the Rear Converter #MF23286 for the 3.3L and the…

Hey Ron, the Replacement Converter for your Magnetek Converter Series 6300 Model 6332 is going to be the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 35 Amp item #PD4635V. It being rated a couple amps higher will not be an…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

California's emission control standards are stricter than most states. This is why many auto parts, like the MagnaFlow #MF93257, are not approved in California but are in other states. It's referred to as CARB certification because of the…

You can upgrade your Magnetek 6332 using the Replacement Section for AC/DC Power Distribution Panel - 35 Amp #PD4635V.

Hey John, yes that is how the etrailer classic base plate kit #e74FV installs.

If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.

If you just need to replace the converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now. The built-in Charge…

Hey there Gary, thanks for the photo and yes the etrailer Bolt-On Swivel Mounting Plate for 3,500-lb Trailer Jacks with a 5/8" Swivel Pin #e52JR will indeed work with your Round, Pipe Mount Swivel Jack #TJP-5001S-B.

For your 2021 Forest River 2883WS I would recommend a hitch mounted cargo carrier over a bumper cargo carrier, as Forrest River does not recommend mounting anything the the bumper although people have done it in the past with no issues. Because of…

Yes the etrailer 2-in-1 Exterior Windshield Cover #e98899 will fit your 2020 Ram 1500. I attached a picture that shows this installed on a similar size truck to show it fits your size vehicle.

The jacks you looked at are the side mounting jacks like the part #PS1401420303 which mount with a pipe mount that attaches directly to the trailer frame. This would be a great option that would work well on a smaller utility trailer.