Fender Trim Specs:
Installation Notes:
Drilling will be required for installation if any of the holes in the product do not line up with the holes on the vehicle
More Information >Fender Trim Specs:
Installation Notes:
Drilling required for installation
Tech Tip:
Designed for installation with Aries rear fender flares, AA2500201 or AA2500202.
More Information >Fender Trim Specs:
Installation Notes:
Drilling will be required for installation if any of the holes in the product do not line up with the holes on the vehicle
More Information >Fender Trim Specs:
Installation Notes:
Drilling will be required for installation if any of the holes in the product do not line up with the holes on the vehicle
More Information >Fender Trim Specs:
Installation Notes:
Drilling will be required for installation if any of the holes in the product do not line up with the holes on the vehicle
More Information >Fender Trim Specs:
Features:
Outfit your Jeep Wrangler JL or Gladiator with Aries front fender flares. Included LED lights provide extra visibility from the front and sides, and function as running lights and turn signals. Lightweight aluminum construction is rustproof.
Installation Notes:
Drilling will be required for installation if any of the holes in the product do not line up with the holes on the vehicle
More Information >Fender Trim Specs:
Features:
Protect your vehicle from flying debris when going off-road with these rear tube fenders. Provides high clearance for Jeeps with large tires.
Installation Notes:
Drilling required for installation
More Information >Fender Trim Specs:
Installation Notes:
Drilling will be required for installation if any of the holes in the product do not line up with the holes on the vehicle
More Information >Fender Trim Specs:
Installation Notes:
Drilling required for installation
Tech Tip:
Designed for installation with Aries front and rear fender flares (AA1500201 and AA2500201) or (AA1500202 and AA2500202).
More Information >Fender Trim Specs:
Features:
Protect your vehicle from flying debris when going off-road with these front tube fenders. Provides high clearance for Jeeps with large tires. Includes turn signal lights for added safety and visibility.
Installation Notes:
Drilling required for installation
More Information >Fender Trim Specs:
Features:
These fender flares replace your Jeep's front and rear factory fender flares to increase coverage and provide more tire clearance. Constructed of paintable steel with black powder coat finish. Easy, bolt-on installation with included hardware.
Installation Notes:
Drilling may be required for installation
More Information >Fender Trim Specs:
Installation Notes:
Drilling required for installation
Tech Tip:
Designed for installation with Aries front fender flares, AA1500201 or AA1500202.
More Information >Fender Trim Specs:
Installation Notes:
Drilling will be required for installation if any of the holes in the product do not line up with the holes on the vehicle
More Information >Videos
for Fender Trim
Help Articles
for Fender Trim
Expert Answers
for Fender Trim
The lights you referenced in the photo for the Aries Front Fender Flares #AA1500201 wouldn't be factory lights. There is a similar product available for your 2012 Jeep Wrangler Unlimited that work with the aforementioned Fender Flares. The Aries…
view full answer...We have what you need. I will list them below for you. The Blue Ox Aftermarket Off-Road Bumper Adapter - 7/8" Pin #BX88357 for your 1 inch D-rings. The etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates - RV Mount - 2" Hitch - 6,000…
view full answer...For a bumper mounted spare carrier that has capacity for an 80 lb setup we have the part #BR56VR from Brophy that fits a 4 inch bumper like you have and would work well.
view full answer...If 380 pounds is the tongue weight of your trailer, then you are correct. You add the tongue weight of the trailer to bike rack and bikes, and that total is your total tongue weight. Make sure you are within the tongue weight capacities of both your…
view full answer...Yes, it does. The arm on the Kuat Pivot 2 Swing Away Hitch Extender item #PVD20B locks at 90 degrees and opens up to 120 degrees. I have attached a photo below that shows how this function works.
view full answer...Using a hitch extender is safe as long as you stay within the limits specified of 50 percent of the hitch and vehicle load capacity, and 350 lb tongue weight capacity of part #HE06. The other option to provide additional clearance from your spare…
view full answer...The center of the hitch pin hole for the Draw-Tite Max-Frame Trailer Hitch Receiver #DT37GR is 6" further out than the center of the hitch pin hole for the Curt Trailer Hitch Receiver #C76WR. Since the hitch pin hole determines where your…
view full answer...For your 2022 Jeep Wrangler, the twist locks (the base plate tabs) will indeed connect to the end of the arms on the etrailer SD Non-Binding Tow Bar #e34ZR. You'll connect that directly to the Invisible Base Plate Kit #e98948. It's somewhat…
view full answer...Hi Kerry; the 339894 is actually still an active part. The correct replacement motor is the Replacement Electric Motor Assembly for Lippert Coach RV Steps #LC63BX which is the same as the 339894.
view full answer...No, I am sorry as there isn't a base plate that I can guarantee would also fit with this grille guard. Often they will be using the same space or attach in the same places. What type of bumper does your Jeep have? I am happy to recommend a base…
view full answer...On the Jeep Wrangler and Jeep Truck models the steering wheel does not actually lock with the ignition in the off position, it just has a loss of power steering-which is likely what you're experiencing. Jeep removed the steering wheel lock from…
view full answer...When installing a transmission cooler it is not necessary to pre-fill the cooler with fluid. That will only cause a bigger mess most likely. It's not like an oil filter where it's a good idea to pre-fill before installing it. You'll just…
view full answer...Filter Products (13)