Vehicle Style: 3.6L V6 Engine
Exhaust Systems Specs:
MagnaFlow Exhaust Systems Features:
This turndown exhaust system is specially designed for installation on vehicles with highly modified suspension systems. It has technologically advanced, mandrel-bent tubing and a straight-through muffler to improve engine performance and durability.
More Information >Exhaust Systems Specs:
MagnaFlow Exhaust Systems Features:
Cat-back exhaust system has technologically advanced, mandrel-bent tubing and a performance muffler, both of which allow exhaust to flow freely. This improves engine performance, boosting horsepower and torque. High-clearance design for off-roading.
Tech Tip:
Exhaust will not fit on models with plastic rear fascia. Rear fascia would have to be replace with an aftermarket metal fascia.
More Information >Exhaust Systems Specs:
MagnaFlow Exhaust Systems Features:
This cat-back exhaust system has technologically advanced, mandrel-bent tubing and a round front muffler, which allow exhaust to flow freely through the system, boosting horsepower and torque and thereby improving engine performance and durability.
More Information >Exhaust Systems Specs:
MagnaFlow Exhaust Systems Features:
This custom-fit cat-back exhaust system has straight-through mufflers and mandrel-bent tubing that allow exhaust to flow freely through the system. This boosts horsepower and torque and helps to improve fuel efficiency for your vehicle.
More Information >Exhaust Systems Specs:
MagnaFlow Exhaust Systems Features:
This custom-fit cat-back exhaust system has straight-through mufflers and mandrel-bent tubing that allow exhaust to flow freely through the system. This boosts horsepower and torque and helps to improve fuel efficiency for your vehicle.
More Information >Videos
for Exhaust Systems
Help Articles
for Exhaust Systems
Expert Answers
for Exhaust Systems
I have attached a drawing from the installation instructions for the rail kit part #C16430-204 you can check out. As you can see in the attached drawing I noted the carriage bolts and where they are located on the rails when installing. Please note…
view full answer...The only open eye 1-3/4" wide leaf springs we currently carry is the etrailer #e24SR & #e33SR. I have no way to verify the weight capacity for your current springs but as it is only a 2" square axle this spring is likely much heavier…
view full answer...Hey Tim, Good questions, and camper tie-downs are always a touch confusing so I can explain the difference for you between the two TorkLift camper tie-downs for your 2016 Ford F-250 long bed with factory hitch and no running boards. The difference…
view full answer...Hello Howlands, Unfortunately, we do not have dump trailer tarp kits. We do have some nets and tarps but nothing in the specs that you are looking for, closest thing we have is the Gladiator Trailer Cargo Net with Cam Buckle Tie-Downs - 7'…
view full answer...Hello Kevin, thanks for reaching out. Yakima does confirm the Timberline towers to fit the factory raised rails on the 2025 Honda Pilot. Sadly, they do not offer a direct fit for the LockNLoad Platform so your best option would be to go with a roof…
view full answer...It looks like the Air Lift LoadLifter 7500 XL #AL57577 will bolt up on your 2019 Ford F-250 with the 6" lift. Your lift kit moved the overload bracket that contacts the stock bump stop which is where the bottom bracket of the air bag will mount.…
view full answer...Thanks for reaching out, Kyle. According to the online owner's manual, the 2020 Toyota Tacoma TRD Off Road has a max towing capacity of 6,500 lbs. So based on this, yes, I think you can definitely tow a 2017 Passport Ultra Lite with a 4,400 lb…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...The centerline on the #BR27FR is going to be from the center of the hitch pin hole. If you draw a line straight out and measure the distance to the bottom of the hook that is 1". I have attached a diagram below for your reference.
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...Air Lift does not sell an Air Spring that does not include an internal jounce bumper, as they are integrated with the design of the product. This is a known issue with Tundras', and many people have reported that the Firestone Ride-Rite Air…
view full answer...Hey Michael, thanks for reaching out! The EcoHitch #EH57FR sits a little higher than the Curt #C52NR so it will give you better ground clearance for your 2024 Chevy Silverado 2500. The EcoHitch is a bit more recessed into the front bumper than the…
view full answer...Filter Products (5)