Fender Trim Specs:
Features:
These front tube fneders protect your Jeep from flying debris and provide high clearance for Jeeps with large tires. Hardware included.
Installation Notes:
No drilling required for installation
More Information >Fender Trim Specs:
Features:
Outfit your Jeep Wrangler JL or Gladiator with Aries front fender flares. Included LED lights provide extra visibility from the front and sides, and function as running lights and turn signals. Lightweight aluminum construction is rustproof.
Installation Notes:
Drilling will be required for installation if any of the holes in the product do not line up with the holes on the vehicle
More Information >Fender Trim Specs:
Features:
Replace your plastic factory fender liners with these durable aluminum liners to protect against mud, water, and other debris.
Installation Notes:
No drilling required for installation
Tech Tip:
Designed for installation with Aries front fender flares AA65DQ.
More Information >Fender Trim Specs:
Installation Notes:
Drilling will be required for installation if any of the holes in the product do not line up with the holes on the vehicle
More Information >Fender Trim Specs:
Fender Trim Specs:
Features:
Show off your large, offroad tires with these custom fit Jeep fender flares. Lightweight aluminum construction is rustproof. Textured black powder coat hides minor scratches and grime.
Installation Notes:
Drilling required for installation
More Information >Videos
for Fender Trim
Help Articles
for Fender Trim
Expert Answers
for Fender Trim
No, I am sorry as there isn't a base plate that I can guarantee would also fit with this grille guard. Often they will be using the same space or attach in the same places. What type of bumper does your Jeep have? I am happy to recommend…
view full answer...Hi Richard! It sounds like you're needing to install the Load Resistor Kit for LED Turn Signals #DI34ZR on the turn signals you've installed on your toolbox. Since LEDs don't require as much power as incandescent…
view full answer...The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.
view full answer...I must recommend that you replace the hub/drum as well when changing the size of your braking assemblies because the surface area on the old drums may not line up with the new braking assemblies which is why I recommend replacing both at the same…
view full answer...Great question. As a general rule, when your trailer is loaded to it's full capacity, there should be a minimum clearance of 3 inches between the top of your tire and the underside of your fender.This should give you adequate clearance…
view full answer...The 205/75-15 Tire and Wheel Combo, #AM32395, is 8.1 inches wide and 27.3 inches tall. An F78-14 tire and wheel will be about the same width but it will be 1 inch shorter. I have included a link to a tire size FAQ article that should help.
view full answer...Our largest wheel and tire we carry I recommend using for the Timbren Axle-Less Trailer Suspension #A20RS545 is the Karrier ST205/75R15 Radial Trailer Tire with 15" Aluminum Wheel #KE27JR. This is our largest wheel diameter with the 5 on…
view full answer...I do have an option for you but roof rails won't work very well on a teardrop trailer, even if you were able to get the rails to conform, it's likely the accessories would bind due to the steep angles. Instead, you will need to use…
view full answer...To add a set of air bags to your 2024 Ford F-250 4WD, I recommend the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs item #F95FV. I really like the Firestone airbags because they use a crimp rolled design which is much more durable…
view full answer...The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…
view full answer...I recommend going with the 5,000lb Firestone Ride-Rite Air Helper Springs #F35FV on your 2023 Ford F-250 super duty. These have a capacity which is higher than what your F-250 is even capable of supporting on the rear axle. The 7,500lb Firestone…
view full answer...I pulled 3 different wheels from our warehouse and weighed them on our scale for you. The Aluminum HWT Mod Trailer Wheel, part #AM22646 weighs 15.8 lbs. This has a pilot hole that measures 4.25 inches. I pulled a couple steel wheels as well. The…
view full answer...Filter Products (12)