2007 Dodge Dakota Lift Assist

Hey thanks for reaching out, Robert. Your Dexter P-15 model SLR 3,500 lb axle does use the standard bearing combination for a 3,500 lb axle. I was able to confirm this with Dexter. So, you have #L68149 for the inner bearing and #L44649 for the…

I have included a video that briefly goes over installing the Hopkins EasyLift Truck Bed Tailgate Lift Assist #74211 but we do not have a video that goes over the entire installation process. As you can see in the video you will need to drill a…

Hi Scott; the Bulldog Round, A-Frame Jack #BD155033 you were looking at is the best replacement for your 1551060301. This jack has the same 2,000 lb capacity, topwind handle, and 15" travel you have now. If you want the caster wheel again…

Hello Michael, thanks for getting in touch. The Replacement Extang Trifecta 2.0 Tonneau Cover #EX92480-20 is indeed for the 2020 Ford F-150 XLT with the 6.5' bed. This is the replacement tarp for the Extang Trifecta 2.0 part #EX92480 which is…

Hi Robert; the Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle #BK2-100 is the correct bearing kit for your axle.

Hey Jason, so we don't have the Hopkins tailgate assist part #74211 listed as a fit for your 2011 Ford F-350 but we do have the DeeZee part #DZ43203 as a fit.

The Air Lift LoadLifter 5000 #AL88200 will work with the Air Lift Air Helper Spring Cradle #AL59DQ on your 2013 Ford F-150. The cradle actually replaces the lower roll plate so the air bag will sit directly in the cradle. I'm not sure how…

Hey Dell, We do have a replacement tarp for the Extang Trifecta 2.0 Soft Tonneau Cover #EX83VR that fits your 2021 Ford F-150 with a 5-1/2' bed, but it's actually a different part number than the one you mentioned. Instead, the…

You are correct that is a 3,500 lb axle. If you want a bearing kit the #BK2-100 you looked at is the right one. This comes with a #L44649 outer and #L68149 inner bearing along with a #58846 (10-19) grease seal. If you want a replacement idler hub…

Hey Lucas, The Curt MV #C17050 is for total tongue weights between 500 lbs and 600 lbs only (600 lbs isn't actually the minimum), and for a 5,000 lb GVWR camper, the tongue weight is definitely going to exceed what this hitch is capable of.…

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…