2007 Dodge Dakota Vehicle Snow Plows

Hello Rickey. The Curt Class 2 Hitch #C12181 is currently the only custom fit aftermarket hitch available for the 1991 Mitsubishi Montero and it uses a 1-1/4" receiver. The only way to add a…

Hi Winston; there are two options to mount a snow plow on your 2010 Ford F-150 FX4. If you want to use the Detail K2 Summit II Snowplow #K2SUMM8826 you looked at you will need the Custom Mounting Brackets for Detail K2 Snowplows #K281521. The…

That's a really valid concern about the install of the Draw Tite hitch #65079 on your 2021 Jeep Wrangler 4xe Rubicon. I personally am not a fan of snow plows that attach to front hitches as from experience here at…

If you already have a front mount hitch then all you'll need is a snowplow which uses the hitch receiver for installation. The Detail K2 Elite Snowplow for 2" Hitches part #K2AVAL8826ELT for…

The Curt Front Mount Trailer Hitch Receiver #C31068 is my recommendation for your 2012 Ford F-150. I then recommend the Curt Class III Ball Mount with 2" Ball - 2" Drop #C45036 to allow you to…

Hello Walt. We do have snow plow kits that will fit your 2006 Chevy Trailblazer 4x4. The #SS78GV you were looking at will fit, you just will need to install the front hitch #31055.

Both the SnowBear Proshovel Snowplow, with Electric Actuator #SB324-168 and the SnowBear Personal Snowplow, with Electric Winch #SB324-080 will allow you to easily raise and lower the snowplow, and both come with an in-cab toggle switch, as well as…

The only difference between the Detail K2 Summit II Snowplow #K2SUMM8826 and the Detail K2 Storm II Snowplow #K2STOR8422 is the actual size of the snowplow. The Summit II is 88" Wide x 26"…

I went ahead and reached out to my contact at DK2, and he said that you are correct in saying that you will have to remove the air dam on the bottom of the bumper of your 2019 Ram 1500 Classic in order to install the mounting brackets #K284314 on a…

The Detail K2 Snowplow for 2" Hitches #K2AVAL8219 does not include the Curt Front Mount Trailer Hitch Receiver #31241 that is needed for your 2020 Nissan Frontier. The plow will come with all the wiring needed for the…

Yes, the Detail K2 Rampage II Snowplow #K2RAMP8219, along with the Custom Mounting Brackets #K286621, are confirmed to fit your 2015 Nissan Pathfinder. The brackets will be a bolt-on installation to your Pathfinder's…

Hello Bart, thanks for reaching out. I can definitely point you in the right direction, but I will need a bit more information on your truck before I can recommend the correct tie downs. Can you please answer the following questions for me? 1. What…