Can the Wheel Masters 4-Hose Inflation Kit be Used with a Tire Pressure Monitoring System  

We have valve extenders for your dual wheel tires. I recommend the Wheel Masters 4-Hose Inflation Kit - 16" to 19-1/2" Dually - Wheel Cover Mount #WM8208. The length of the hoses with straight valve extenders is 13 inches.…

In the installation instructions for the Roadmaster BrakeMaster #RM-8700 there are two fuses wired to the air compressor circuit. One 20 amp fuse on the power wire of the battery, and a 10 amp fuse connected on the blue wire that runs from the…

Yes, the Timken Bearing Kit #TMK52VR will fit your 3,500 lb axle as it fits an standard #84 spindle. The only time this kit won't fit with a 3,500 lb axle is if the trailer/axle is made before the 2000's since that's about the…

When you use the Wheel Masters 4-Hose Inflation Kit #WM8208 on wheels that have covers like what you send in a picture of you will have the brackets clamp to sides of rear wheels before wheel covers are installed. Basically you would install the…

Wheel Masters 4-Hose Inflation Kit #WM8208 and #WM8008 can be used with rubber valve stems. They are only increasing the length of the stems making them easier to access. They do not put any additional stress on the valve stems so they would work…

For your 2018 Sunseeker 2800 on E-450 Cutaway, I recommend the Wheel Masters Airless 4-Hose Inflation Kit - 16" to 19-1/2" Dually - Wheel Cover Mount #WM8208. These will fit your 16 inch wheels and the wheel liners/covers. If you…

There unfortunately isn't a guide to tell us what the correct degree bend you'll need for easier access to the valve so you'll want to take a look at your valve stems to see how they're sitting and determine the route…