Will Lippert Ground Control 3.0 6 Point Kit Fit on 2017 Forest River Hemisphere 372RD  

Once the sensor was changed in the Lippert Ground Control 3.0 part #LC675817 then the error code should have cleared itself. I contacted Lippert and they said to make sure the wiring harness from the rear sensor has continuity. If the wiring harness…

Really you're going to need to measure the distance where the leveling system is going to be installed. If that distance is more than 20', then you're going to want the 6 point Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling…

I don't know what type of brackets were used on your 2022 Heartland RV Torque 5th Wheel but we carry the #LC349975, which can really only be installed at one height since they have lip that butts up against the bottom of the I-Beam. If clearance…

I attached a dimension picture I got from Lippert for the Replacement I-Beam Jack Bracket #LC349975 that you referenced.

I have attached for you the installation manual of the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System part #LC675817. This is a generic install manual that can be used on any trailer but there is not a set of instructions specific…

I sent your picture to my tech contact at Lippert and they responded with saying that the mounting brackets are designed to go behind and under the cross shaft of the slide out. If you check out the picture I attached you'll see how it would fit…

The total weight of the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System #LC675817 that you referenced is 350 lbs.

Yes you can use the Lippert Solid Stance RV Step Support Kit #LC96BJ. This support kit will work with steps 5" to 14" off the ground, and measures 22-3/4" wide x 2-5/8" tall x 4-1/2" deep when folded. Attached is a review…