Rhino-Rack Pioneer Platform & Backbone Mounting System That Fits 2014 Ram 1500 Crew Cab

Question

Question:

Will it RRRFRB1 fit 2014 Ram 1500 crew cab and can I install heavy duty crossbars on that backbone system?

asked by: Daniel

0

Expert Reply:

We do have a Rhino-Rack Pioneer Platform and Backbone Mounting System that fits your 2014 Ram 1500 Crew Cab, though it is different than the part number you mentioned, and crossbars are not able to be mounted to it, as this is only for the Pioneer Platform. For your Ram, the platform and mounting that fit are the following:

- Rhino-Rack Pioneer Platform Rack with Backbone Mounting System # JB0702

You can mount bars to the platform with the Rhino-Rack Accessory Bars for Pioneer Platform Rack # RR43138B, or if you just wanted a heavy-duty crossbar system on your 2014 Ram 1500 Crew Cab, you could get that as well with a Rhino-Rack roof rack. What you would need are the following parts for that:

- Rhino-Rack Heavy-Duty Roof Rack Crossbars - Silver # RB1500 or Black # RB1500B-2
- Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD
- Custom DK Fit Kit # DK043

expert reply by: Kyle S

0

Answer 1

The SmartPlug RV and Marine Power Inlet - 50 Amp - Stainless Steel #SM79FR is ETL listed which, to my understanding, is just a slight variation of UL listed. So while it doesn't have that exact rating, it's still safe to use and has been…

view full answer...

Answer 2

The Rhino-Rack Pioneer Platform Rack with Backbone Mounting System #RR33ZW that you mentioned is not going to work with your 2010 Ram 3500 MegaCab, however I do have another alternative for you. Check out the: -Rhino-Rack Pioneer Platform Rack with…

view full answer...

Answer 3

Rhino-Rack Pioneer Platform Roof Tray #RR42113BF is compatible with the Rhino-Rack Backbone System #RRRR1B1. This tray Is 60" long x 56" wide. This fits the RAM 1500, 2500 and 3500. If you need both the Backbone System and the Tray you can…

view full answer...

Answer 4

In order to achieve maximum cranking amps you will want to wire your two 12 volt batteries in parallel (see photo). The output of 12 volts will remain the same but the capacity and cranking amps will become the sum of the two batteries. For example,…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

Hi Ruben; thanks for the question, and while there is one rack for your 2023 Ford F-150 with a 6-1/2' bed compatible with the Pace Edwards UltraGroove Metal Retractable Hard Tonneau Cover #PE66UV, it does not have sides, and is part #TX84NV.…

view full answer...

Answer 7

Hey Brian, the Pace Edwards Full Metal JackRabbit part #PE36CV that you referernced has a 300 lb weight capacity when spread evenly on the cover. The Retrax Pro XR on other hand has a 500 lb capacity.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Rhino-Rack Pioneer Platform & Backbone Mounting System That Fits 2014 Ram 1500 Crew Cab

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching