2000 Ford Expedition Radiator Fan

Hi Bob! The Timbren #TGMRG25C you ordered will have 6,000 pounds of load assist and will be the highest rated option available for your 2003 Tahoe. This will definitely solve your sagging issue, especially if you are close to or at the maximum load…

Yes, there is a bolt that goes all the way through that holds the Timbren Rear Suspension Enhancement System item #TGMRG25C in place. I have linked the instructions and an installation video below so you can see the steps involved and all the tools…

Yes, the Flex-a-lite Direct Fan Dual Electric Radiator Fan with Shroud #FLX284 can be used for towing applications on your 2004 Chevy Silverado with the 6.6L V8 diesel engine. Unfortunately, this fan (and all other fans) does not change the maximum…

For a safety chain that will be sufficient for most gooseneck trailers I really like the Fulton Safety Chain with Clevis Hook part #FCHA0050324. This safety chain has a grade 70 rating with large clevis hook. You will need two of them for your…

The Flex-a-lite 16" LoBoy Electric Radiator Fan 2,500 CFM #FLX118 is the puller fan equivalent of the model #FLX119 you were looking at so if the 16" wide x 16-1/2" tall x…

The method we use to determine the correct line to install a transmission cooler on is pretty simple. You want to install the cooler on the return line. To determine which line is the return line you will want to start with your truck totally…

-6 AN fittings are a specific threaded fitting size. The Derale Hyper-Cool Remote Transmission Cooler Kit w/ Fan, -6 AN Inlets - Class V #D13960 has the specific fittings you mentioned but it also comes with the barb fittings that simply use a hose…

The motor by itself is not available for Derale Hyper-Cool transmission cooler #D13960. You would need the complete fan assembly #D16618.

The first thing you will want to do is inspect your suspension system to make sure it is in good working order. If you have a weak suspension and relying on the Timbrens you already have installed, you will get more bounce than normal. The Timbrens…

To see installation details for both hitches, click the provided links. The Curt #C14011 installs using 18mm bolts that use existing nut plates in your Excursion's frame. No drilling is required to completed the installation. The…

For your 2003 Ford Crown Victoria you can use Hopkins trailer wiring harness #46255. There isn't a T-connector that just plugs into the taillight wiring available for your vehicle so you will need to use this hardwire harness. You…