Features:
With its all-aluminum body and multi-fin design, this replacement fan clutch offers superior functioning.
Installation Notes:
Application suitable for vehicles with air conditioning
More Information >Features:
With its all-aluminum body and multi-fin design, this replacement fan clutch offers superior functioning.
Installation Notes:
Application suitable for vehicles with air conditioning
More Information >Videos
for Radiator Fans
Help Articles
for Radiator Fans
Expert Answers
for Radiator Fans
Hey Trent, from what I found your 1995 Jeep Grand Cherokee uses an 18 inch diameter clutch fan like the part #D17118. The part number you referenced is 17 inches so it wouldn't work but I would recommend measuring to verify this.
view full answer...Hi Bob! The Timbren #TGMRG25C you ordered will have 6,000 pounds of load assist and will be the highest rated option available for your 2003 Tahoe. This will definitely solve your sagging issue, especially if you are close to or at the maximum load…
view full answer...Yes, there is a bolt that goes all the way through that holds the Timbren Rear Suspension Enhancement System item #TGMRG25C in place. I have linked the instructions and an installation video below so you can see the steps involved and all the tools…
view full answer...For the best performance, a radiator fan like Derale 12 Inch High-Output, Electric Radiator Fan, #D16925, should be mounted directly against the radiator. If there is a gap, less airflow will go through the radiator and it will not be as efficient.…
view full answer...I have included some pictures of Curt Front Mount Trailer Hitch Skid Shield #C31007 for you. The overall height of the skid plate is 4-1/4 inches, overall width is 4-7/8 inches. The overall length of the unit end to end is approximately 8-3/8 inches.…
view full answer...Both of the 2" receivers on the TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - Dual 2" Receivers #TLF1006 have the same tongue weight rating of 1700lbs and trailer weight rating of 17000lbs, Or 2000lb tongue…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...Yes, the Flex-a-lite Direct Fan Dual Electric Radiator Fan with Shroud #FLX284 can be used for towing applications on your 2004 Chevy Silverado with the 6.6L V8 diesel engine. Unfortunately, this fan (and all other fans) does not change the maximum…
view full answer...When wiring a trailer connector, it is best to wire by function, as wire colors can vary. We have an excellent wiring diagram on our website, I will provide you a link so you can look at it. If you are looking at the inside of the trailer connector…
view full answer...The Curt Front Mount Trailer Hitch Receiver #31320 will provide better ground clearance for your 2005 Dodge Ram 1500 by approximately 3 inches. I have attached a photo that will show you the measurements from the mounting surface of each hitch to the…
view full answer...For a safety chain that will be sufficient for most gooseneck trailers I really like the Fulton Safety Chain with Clevis Hook part #FCHA0050324. This safety chain has a grade 70 rating with large clevis hook. You will need two of them for your…
view full answer...Filter Products (2)
Contact and Help
What our customers are saying:
Quick processing, and delivery. reasonably priced very satisfied
Bernie
Krakow, WI