Snow Plow Specs:
Features:
Mount this light-weight, user-friendly plow to your front or rear-end 2" hitch and let the 82" blade do the work. All you need to do is drive. Plow is fixed in a straight ahead position, blade automatically raises and lowers when needed.
Tech Tip:
Product is designed to fit the 2 in. receiver on the back of your vehicle.
More Information >Vehicle Snowplow: SS48GV
Price: $1,799.00
Custom Fit Hitch: C31008
Price: $231.94
Complete Kit:
Snow Plow Specs:
Front Receiver Hitch Specs:
Features:
84 x 18 Heavy-duty plow with thick rubber cutting edge self-adjusts up and down to smoothly clear a path over concrete, gravel, and grass. Side scoops catch more snow with each push. Aluminum blade can be manually angled to either side.
Installation Notes:
No drilling required for installation
Trimming of front air dam and/or fascia may be required for installation
More Information >Vehicle Snowplow: SS98GV
Price: $1,399.00
Custom Fit Hitch: C31008
Price: $231.94
Complete Kit:
Snow Plow Specs:
Front Receiver Hitch Specs:
Features:
82 x 14 Residential plow with thick rubber cutting edge self-adjusts up and down to smoothly clear a path on any terrain. Aluminum blade stays in straight-ahead position, and makes plowing your driveway as easy as pulling forward or backing out.
Installation Notes:
No drilling required for installation
Trimming of front air dam and/or fascia may be required for installation
More Information >Videos
for Snow Plow
Help Articles
for Snow Plow
Expert Answers
for Snow Plow
Hi Winston; there are two options to mount a snow plow on your 2010 Ford F-150 FX4. If you want to use the Detail K2 Summit II Snowplow #K2SUMM8826 you looked at you will need the Custom Mounting Brackets for Detail K2 Snowplows #K281521. The…
view full answer...Hey Bruce! The support bar mounting issue you pointed out is why I am going to steer you away from using the Curt Front Hitch item #31302 to attach a snow plow on your 2006 Yukon. Those support bars on the SnowBear Snowplow item #K2AVAL8219…
view full answer...Hey John, thanks for reaching out! It all depends on what snowplow you go with. For example, the Agri-Cover SnowSport LT #SS98GV requires 8" - 14" of clearance under the receiver, while the Detail K2 Snowplow #K2AVAL8826 requires a hitch…
view full answer...For your 2006 Honda Ridgeline, the K2 Avalanche plow is only a fit for the front mounted receiver. The custom mount brackets #K286110 are not a direct fit for your Avalanche plow but the mount does come with a crossbar and I've attached the photo…
view full answer...Hello Rickey. The Curt Class 2 Hitch #C12181 is currently the only custom fit aftermarket hitch available for the 1991 Mitsubishi Montero and it uses a 1-1/4" receiver. The only way to add a 2" receiver to this vehicle would be to use a…
view full answer...It is likely you can avoid the drain line when installing the MORryde X-Factor Crossmember for Standard Frame Hangers #MR33WR by using the MORryde X-Factor Crossmember Adapter Kit for Drop Down Applications #MR43WR. I don't know exactly the…
view full answer...To install the Curt Hitch part #C31068 on your 2014 Ford F-150 with Ecoboost you will need to remove the air dam and then trim a small section of the lower fascia. See photo.
view full answer...That's a really valid concern about the install of the Draw Tite hitch #65079 on your 2021 Jeep Wrangler 4xe Rubicon. I personally am not a fan of snow plows that attach to front hitches as from experience here at etrailer they just aren't…
view full answer...Hey Michael, thanks for reaching out! The EcoHitch #EH57FR sits a little higher than the Curt #C52NR so it will give you better ground clearance for your 2024 Chevy Silverado 2500. The EcoHitch is a bit more recessed into the front bumper than the…
view full answer...Both the SnowBear Proshovel Snowplow, with Electric Actuator #SB324-168 and the SnowBear Personal Snowplow, with Electric Winch #SB324-080 will allow you to easily raise and lower the snowplow, and both come with an in-cab toggle switch, as well as a…
view full answer...Choosing a snow plow can be a bit intimidating because of all the choices available on the market. The snow plow I recommend for your 1997 Nissan Pathfinder is the Detail K2 with a custom mount: Detail K2 Rampage II Elite Snowplow - #K2RAMP8219ELT…
view full answer...The Curt Front Mount Trailer Hitch Receiver #C31068 is my recommendation for your 2012 Ford F-150. I then recommend the Curt Class III Ball Mount with 2" Ball - 2" Drop #C45036 to allow you to launch and load your bass tracker boat. This…
view full answer...Filter Products (3)
Contact and Help
What our customers are saying:
In these days of customer "no service" I am usually disapointed when doing business with people I don't know. It was refreshing doing business with you. I'm impressed!
Randy
Watkinsville, GA