Customers compare AM20436 to these similar products
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Dexter Nev-R-Lube Bearings such as the 50MM #31-71-3 referenced in your question do not have a specific maintenance or replacement schedule. These are pre-lubricated at the factory, which will make it resistant to contamination, and sealed for life…
view full answer...It sounds like you are looking for the Dexstar Steel Mini Mod Trailer Wheel part #AM20436 which matches all the specs in the photo you attached. The manufacturers part number for this wheel is also 017-231.
view full answer...We do carry the Dexstar 17-231 Steel Mini Mod Trailer Wheel #AM20443 which is a 15 x 5 wheel rated for 2150-lbs. The wheel has a 5-on-4-1/2-inch bolt pattern, 3.19-inch pilot hole and is made in the USA. It will accept a 205/75-15 tire like Kenda…
view full answer...Trailer axles are designed to have the bow in them that you described. This allows the axle to flatten out when it is loaded and have the proper camber. If you have axles that are rated for considerably more than what the trailer will ever have…
view full answer...The Replacement Grease Cap for Kodiak 8,000-lb Disc Brake Kits #KPCAP is designed to fit a 2.25 inch spindle and has a thread outer diameter of 2-7/8 inch by 12 thread. We also have the Oil Cap, Plug and O-Ring for Dexter 7-9K Trailer Axles #RG04-230…
view full answer...The issue you are going to run into using both a load range C and D tire together is psi. The 205/75-15 tires we offer have a 50 psi rating for load range c and a 65 psi rating for load range D. This is not going to have a drastic effect on the…
view full answer...We offer four trailer tires in your required 205/75R15 size and all can be seen on the link provided. The highest-rated tire is part #AM10245 which is a radial tire in Load Range D. This tire is rated for a maximum load of 2,150-lbs at its specified…
view full answer...A higher load range tire has a higher ply rating but it will also produce a rougher ride and could have a psi rating that exceeds the capacity of the wheel or, more likely, the valve stem. The size you have now, 225/75-15 load range C, is rated for…
view full answer...The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…
view full answer...I attached a chart that has all of the recommended lug nut torque specs for trailer wheels. Based on your studs being 1/2 inch, your wheels being 15 inches in diameter, and your lug nuts being coned you would want to torque your lug nuts to 90-120 ft…
view full answer...According to my research your Dexstar 017-604 15 x 5 JJ wheel either has a 5 on 4-1/2" bolt pattern or a 5 on 5" bolt pattern. The most common is a 5 on 4-1/2" bolt pattern like what we see with part #AM20436 so if I had to guess I…
view full answer...An ST205/75-15 trailer tire will fit on 15 x 5 to 15 x 6-1/2 inch wheels but will not fit a 15 x 7 inch wheel. Wheel width is not the overall width. It is the width where the tire sits, bead seat to bead seat. So if you are measuring the overall…
view full answer...