Brophy Stake Pocket Mounted Camper Tie-Downs - Bed Mount - Qty 4
(310 reviews)
Price: $115.31
In Stock
Brophy Stake Pocket Mounted Camper Tie-Downs - Bed Mount - Qty 4
Item # TDSF
Retail:$171.41
Our Price: $115.31
You Save: $56.10
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (310)
- Q & A (0)
- Photos
Brophy Camper Tie-Downs - TDSF
- Front and Rear Tie-Downs
- Brophy
- Bed-Mounted
- Powder Coated Steel
Steel brackets permanently install into the stake pockets of your non-dually, full-size pickup for a convenient, integrated camper tie-down. Creates a dependable anchor point for mounting your lightweight camper. For campers up to 8' long.
Features:
- Creates attachment points for securing your camper to your truck bed
- Turnbuckles (sold separately) required to attach camper to tie-downs
- Fits tightly into the stake pocket with built-in spacers
- Spacers can be pried off to give you more wiggle room for installation
- Resists corrosion and rust with black powder coated steel
- Mounts permanently in your truck's stake pockets - drilling required
- Locks tie-downs into the truck bed side rails with metal tabs
- Includes 4 camper tie-downs and installation hardware
- Made in the USA
Specs:
- Application: most full-size, non-dually pickup trucks with straight fenders and single-wall construction (for exact fits, enter in your vehicle's year/make/model above)
- Compatible with drop-in bed liners and side-step beds
- Works with truck bed campers up to 8' long
- Dimensions: see diagrams below
- 1-Year limited warranty
Simple, Secure, and Convenient
Installing these tie-downs is pretty darn simple. They'll just slide into the stake pockets on your truck and you'll drill in some bolts through the pockets and the top of the rail to secure them. They fit snugly and there's no guesswork about where they mount on the rail. Tucked into the stake pockets, they're conveniently out of your way if you want to use your bed for hauling something other than your camper.
Securing your Camper
To secure your camper to your truck, you'll also need a tie-down hardware package consisting of turnbuckles, S-hooks, and chains (TDHP - sold separately). This hardware attaches to the anchors on your camper to the tie-downs on your truck to keep your camper secure safely mounted. Once you tighten the turnbuckles to the correct level of tension (not too tight!), you'll be good to hit the road.
TDSF CR Brophy Truck Camper Stake Well Tie Downs for Slide In Truck Camper - Bed Mount - 4 Pack
Installation Details
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Brophy Stake Pocket Mounted Camper Tie-Downs - Bed Mount - Qty 4 - TDSF
Average Customer Rating: 4.4 out of 5 stars (310 Customer Reviews)
Steel brackets permanently install into the stake pockets of your non-dually, full-size pickup for a convenient, integrated camper tie-down. Creates a dependable anchor point for mounting your lightweight camper. For campers up to 8' long.by: Francisco06/30/2023
Used these on my 2012 Tundra Crew max Had to put in more effort in the installation then the instruction tell or show.
for example the truck pockets where these slide into I had too cut the plastic that was covering the holes,
I removed the tail light on one side to get the top bolt screwed in.
I had to remove the gas cap and plastic to secure the top bold.
I also added bigger washers cause there are existing hole that hold the factory plastic so the nut couldn't slide out and away.
Other then that these mount work great
by: Eric03/03/2024
Not compatible with 99 Ford F-150, even though the description said it was. Stake pockets are double walled on this truck. Bolts too short. Very frustrating.
by: Ken05/03/2016
I was hesitant about getting these because I wasn't sure if they would fit. I have a '65 Chevy C-10 and was concerned they would not work because any more, everything is about all the new vehicles on the road, not the oldies. But after consulting with the people at etrailer, I ordered them and couldn't have been happier. I did have to remove the metal tabs (they pry off), but after that, I measured, marked, drilled, and installed the tie-downs in about 20 minutes tops. Loaded the camper and the tie downs worked great. Took it camping 4 times so far and the tie downs are still solid as a rock. Thanks etrailer!
by: Gregory01/25/2019
Overall, very simple and easy to install the Brophy tie downs. The hardware was honestly garbage.. weak grade that undoubtedly would not hold up to this weight and movement. Used heavy duty bolts to secure it to bed rails and stake pocket. So far, 200 miles driven in snow without much movement, but a bit worried about the longevity of the tie downs. This camper will stay permanently in the bed of the truck, so I will throw in some through bolts into the bed of the truck (peace of mind). Turn buckles seem to be good (other than a factory snag that sliced me open). So far happy with the product, could have been made a bit better for an extra cost; I definitely would have paid more for a two sided stake pocket bolt through. With only one tab for mounting to top side of bed rails this seems excessively weak.. do you see the gap in the stake pocket? It was seated when drilling and lagging it down. Started to turn under pressure.
by: Patrick P.07/06/2016
Installed easily. Had to us longer bolts for the back two posts on my 2003 Dodge Ram 2500 4X4 Quad Cab. Also, had to trim some the factory plastic bed liner. No big deal. I took it for a test drive and one of the back brackets seems to twist a bit. I loosed the turnbuckles a little and it is better. I guess I had them too tight. I will be taking the camper on a mini-getaway and will add any new developments. So far, very happy with the product!
by: Drew09/04/2022
Didn't fit my truck. Customer service was greT though in getting me the correct frame mount brackets for tie downs.
Drew
9/5/2023
Excellent no issues
by: Matthew 05/09/2024
Fast perfect fit
MADE IN USA
by: John08/20/2023
Not strong enough, on a rough 1 mile dirt road to get into the ranch we stay at, the rocking twisted the Brophys. Had a local Albuquerque trailer dealer install heavier duty frame mounted tie downs.
by: James03/24/2022
Told the would fit my truck but they did not. Thru them in scrap pile
Jenny N.
3/31/2022
I see that you had contacted us and advised that you had a 2010 F 150 truck that was built in September of 2010. There are cases where a late in the model year build is actually the next years build which means that the 2010 would have a 2011 frame design. Since these tie downs only fit up to 2010, it would cause a non fit for you. You will want to reach out to Ford to confirm the build design year of your truck.
by: David R03/17/2024
I like the tie dowms,don't have new truck yet to see how they fit.
by: Ryan05/30/2023
Good product. Only problem is with packaging, the painted black parts should be wrapped to prevent chipping which exposes the bare metal. Box contained stacked parts which were banging around in the box resulting in chipped paint...early deterioration potential from rust, and not new appearance.
by: Andrew03/31/2018
After a few slight modifications the brophy camper tie downs worked like a champ!
by: Richard09/25/2023
It bent under load
Jenny N.
9/27/2023
I wanted to ask you a few more questions about the tie downs. Do you still have them? How much weight would you estimate your camper weighs? These tie downs are meant to be used for campers up to 8 feet long, including any cab over portion. They are not meant to be used with 2011 and newer trucks.
by: Nate 05/28/2023
product was well built and easy to install. hold Downs feel very solid as installed on the truck. good value for the money.
by: Jim K.10/15/2016
This set of Brophy stake pocket tie downs came with a note in the instructions that they would not work for any vehicle newer than a 2011. My RAM 2500 has the ABS bed caps on the side. I removed them and enlarged the stake pocket holes using the pre-stamped template on the bed caps. Once I reinstalled the bed caps, the camper tie downs dropped into the stake pockets. I had read other reviews that the lag bolts were prone to stripping out. So I drilled 3/8" holes through the bedside and through the camper tie downs. Then I welded a 3/8" nut on the backside of the camper tie downs. Now all is well and secure. I think this is a good product, and I prefer it over the Brophy camper tie downs that clamp to the lip of the bed. I just wish there was a securement method that didn't involve lag bolts.
Jim K.
10/17/2017
Im still very pleased with the product
by: Trinity11/24/2022
Quality parts, however the mounting holes were not usable. Had to drill new holes in the rear set, also had to use self tapping screws instead of the hardware that was supplied.
Jenny N.
11/25/2022
You mentioned that the mounting holes were not usable and I wanted to see if you could explain in more detail what you mean? Would you be able to send pictures?
by: Phill S.08/24/2015
The stake pockets were easy to install with the hardware provided. The dealer I purchased my camper from asked where I had gotten the mounts and I told him about etrailer.com and he was impressed with the mount and tie-down package as an economical package. My only wish was that the powder-coating on the mounts would have been a little nicer, or the packaging a little better. There was a noticeable amount of nicks and scratches in the paint that detract from the appearance. Nothing that affects performance, just cosmetic appeal.
Phill S.
8/31/2016
The Tie-down brackets and tie-down hardware kit are working fine. They are a good, inexpensive solution for securing my camper to my pick-up.I appreciate the follow-up. You folks are great to work with.
by: Dennis03/29/2018
Great for use on the 85 Chevy dually. Fit was ok, held the medium four star camper pretty good. Not sure if want them holding a medium or large camper on a newer truck, the thick sheet metal on the old trucks aide the brackets. The brackets themselves are sturdy and I bet would not been before the truck or camper broke in half.
Dennis B.
3/30/2019
Great, finish is durable. Still function properly, did not cause wear on the truck
by: Joe D06/20/2020
Great product and reasonably priced.
I made a few modifications because I didn’t think they were secure enough on the truck
They are now bolted on in 2 places to ease my mind. Pics attached
by: Adam08/30/2022
I have a large truck bed camper on my 1991 Dodge W250 that I tried these on. I went this route because I didn't want to spend $2k on Torklift mounts and Fastguns. These came on time and installed super easy, but just had too much flex for me to be comfortable with the size of my load. Ended up going the Torklift route and couldn't be happier. This is a decently made product, just not for me.
by: Michael11/04/2022
They don't seem to be rigid enough. They bent really bad when I was on a rough road. That caused the camper to be loose which wasn't good for my taillights.
by: Chad07/26/2023
Works perfect for what I needed
by: Dave08/24/2022
Stout materials, but they dont fit the stake pocket very well. They are loose in the pocket and are expected to be held in place with a few screws/bolts. Mine tilted to one side when tightening the turnbuckles to hold it in place, and dented the top rail of the bed. Next time I will use a frame mounted system.
by: Craig07/15/2023
Fit and finish. We're perfect.
by: DB03/19/2014
The tie downs arrived quickly and were what I expected them to be with a reasonable price. My only suggestion might be to sell them in pairs instead of 4's. I have an application where I only need 2....Otherwise the etrailer site has worked very well for me.
Db
3/20/2015
Still love etrailer. The tie downs turned to be at the wrong angleposition for my camper so I went another route. But the mistake was mine, so Im keeping them, I have a friend who intends to use them.
25
310
Show More Reviews
See what our Experts say about this Brophy Camper Tie-Downs
- Can a Stake Pocket Mounted Camper Tie-Down be Used with a RamboxThe Brophy Stake Pocket Tie Down, part # TDSF, requires a stake pocket to be used. It does not look like the Ramboxes have stake pockets, so this cannot be used. Even if there are, the Rambox setup increases the width of the bed walls so that normal stake pocket tie-downs won't fit. For your 2011 Dodge Ram Pickup, you will need to go with a frame-mounted tie-down system. I've linked to the appropriate page for your vehicle. In the drop-down list, you will need to choose which option fits...
view full answer... - Camper Tie Down Recommendation for 1973 Ford F-250 PickupThe Brophy Camper Tie Down # TDSF is a compatible fit for your 1973 Ford F-150/F-250/F-350 full size truck and will fit most campers up to 8 feet in length. I have included a link to the instructions for proper installation. I also recommend the Brophy Camper Tie Down Hardware Package # TDHP for use with the Brophy Tie Downs. They have a capacity of 3000 lbs and I have included a link to the instructions for the proper installation of this product.
view full answer... - Will the Brophy Stake Pocket Mounted Camper Tie Downs Fit a 2007 Dodge Ram SRW 3500The Brophy Stake Pocket Mounted Camper Tie Downs # TDSF work with most full-size, non-dually pickup trucks with straight fenders and single-wall construction, model years up to and including 2010. I have included a couple diagrams you can take a look at that include measurements so you can verify they will work with your 2007 Dodge Ram SRW 3500, as well as a video that touches on installation. These will also work with truck bed campers with an overall length up to 8'. You will also need...
view full answer...
- Recommended Tie Downs Options for a 2000 Ford F-250/F-350I do have a set of turnbuckles & tie downs for your 2000 Ford F-250/F-350 but we currently do not have the bumper mounted tie down anchors. Instead you can either choose from a bed mounted tie down or a frame mounted tie down. For a bed mounted tie down, I recommend using the Brophy Clamp On Camper Tie-Downs part # HSAB. As long as your external bed rail width does not exceed 5-1/2", and you have at least 2" of space beneath lip of your bed rail then they will work well for you. If...
view full answer... - Brophy Camper Tie Downs 2015 F-150The Brophy Camper Tie Downs are not custom fitted to vehicles the same as other tie down options, they are mounted onto the bed rails of your truck, no drilling required. For your 2015 Ford F-150 with a pop-up type slide-in type, I recommend the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 # HSAB. They will clamp into the bed rail of your truck and provide an attachment point for your camper. The same tie down but with a polished zink finish is # HSBP....
view full answer...
- Will Brophy Stake Pocket Mount Camper Tie Downs Fit a 2002 Chevy SilveradoThe Camper Tie Down - Stake Pocket Mount, # TDSF, should fit your 2002 Chevy Silverado with Quadrasteer just fine. The only trucks that are excluded from the manufacturer are 1988 or newer mid-size Ford Ranger trucks, 2011 or newer Dodge Ram trucks, or some import trucks. I also recommend adding the camper tie down hardware package # TDHP to go between the Brophy tie downs and the camper. I have included a link to a video featuring both products for you.
view full answer... - Will Stake pocket Mount Camper Tie Downs Fit a 2014 Chevy SilveradoThere are no stake pocket camper tie downs that we carry that will fit your 2014 Chevy Silverado. You would need to use # HSSF with hardware package # TDHP or you could use custom, frame-mounted tie downs. The custom tie downs are going to be the best option since they attach to the truck frame and not just the bed. To view the custom options I would need to know if the truck is a 1500, 2500, or 3500.
view full answer... - Camper Tie Down Recommendation for a 2013 Ram 3500The camper tie downs # HSSF fit most domestic pickups. The only exclusions are as follows: Will not fit step side beds or some double-wall beds Will not fit some Dually beds Will not fit some import trucks Will not fit 2004-2008 Ford F-150 Pickups They should be no problem on your 2013 Dodge Ram 3500HD Short Bed. I have linked a video and the instructions for the tie downs for you. I also recommend the hardware package to match the tie downs, # TDHP. The part # TDSF is not recommended...
view full answer... - How to Tell if Brophy Stake Pocket Mounts Will Fit 2021 Ram 2500The Brophy Stake Pocket Mounted Camper Tie Downs # TDSF are a universal application that fit most full-size, non-dually pickup trucks with straight fenders and single-wall construction. Because of this we don't have them in our fitguide system, but I've attached a photo showing the dimensions of the stake pockets so that you can compare them to the dimensions of your 2021 Ram 2500 to ensure they will work for your application.
view full answer...
- Recommended Brophy Stake Pocket Camper Tie-Downs For 2011 GMC Sierra 2500 With 8' BedI have another option for you, but the Brophy Stake Pocket Mounted Camper Tie Downs - Bed Mount - Black Powder Coated Steel - Qty 4 # TDSF you were looking at are not designed to fit the 2011 and newer GMC trucks. For your 2011 GMC Sierra 2500 8' bed you will need to go with the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 # HSSF which is confirmed to fit your truck. This will give you a great spot to secure your truck bed camper to your bed. If you...
view full answer... - Bed-Mounted Camper Tie-Downs for 2011 Chevy Silverado Short BedThe Brophy Stake Pocket Mounted Camper Tie-Downs # TDSF feature a shank design that isn't compatible with stake pockets on any truck starting with the 2011 model years. This means it won't be a good option for your 2011 Chevy Silverado. For your truck I instead recommend the Brophy Clamp On Tie-Downs # HSSF. These will simply clamp around the bed's side rails to provide you with 4 sturdy camper tie-downs. These will work great on your Silverado as long as the rails aren't wider than 5-1/2...
view full answer...
- How to Determine Fitment of the Brophy Camper Tie Downs in a 1968 Ford F-250 Camper SpecialThe The Brophy Camper Tie Downs # TDSF, are a universal fit kit intended to fit as many trucks as possible. While there is nothing to say that it for sure fits, looking at your pictures it seems likely that it will work for your 1968 Ford F-250 Camper Special. However, this would not be without modification as the Brophy Camper Tie Downs, # TDSF requires holes to be drilled through the pocket and tie-down for installation. I have included a dimensional picture of the Brophy Camper Tie...
view full answer...
- What Brophy Camper Tie Downs Fit My 2017 Ford F-150? I have a definite way to determine what Brophy Camper Tie-Downs you need for your 2017 Ford F-150 short bed. I confirmed with Brophy that in order to know if you truck bed fits the tie-downs, your truck bed must have a minimum of 2 inches of space between the rail lip and the sidewall of the truck. In order to know if the Brophy tie downs work, I recommend measuring your truck. I went ahead and attached an image that shows how to conduct this measurement. Another factor to consider is...
view full answer...
- Which CR Brophy Truck Bed Camper Tie Downs for a 2019 Chevy Silverado 1500As long as you have at least 2 inches of available width between the inside bulkhead of the bed side and the inside of the inner lip on the top of the bed side (see diagram), the # HSAB is a fit according to CR Brophy. To attach the tie downs to the anchor points on the truck bed camper, you'll also need the # TDHP turnbuckle kit. According to CR Brophy, the # TDSF tie downs wouldn't be compatible. If you click the provided links, you an see product description videos for the tie down...
view full answer...
- Will Brophy Stake Pocket Mount Camper Tie Downs Fit a 1965 Chevy C-10 Pickup TruckBased on your measurements I do not see any issues with installing the Brophy tie downs, # TDSF on your 1965 Chevy C-10. The tabs, or spacers if we are talking about the same thing, do not have to be removed but can be. It is the tab at the top, side of each bracket and the bolts that go through those and through the bed side that hold the brackets to the bed. I have included a picture that is of the instructions for these tie downs for you.
view full answer...
- Recommended Camper Tie Downs for a 2005 Ford F-250 4x4 Regular Cab 8 Foot Bed DieselNo, the stake pocket mount tie downs, # TDSF, are only good for campers up to 8 feet long. You would need camper tie downs # HSSF instead for your 2005 Ford F-250. I have included a link to a video review and the instructions to the right. I also recommend camper tie down hardware package # TDHP. You may also be able to install frame mount tie downs which would be ideal. I have included a link to the custom fit frame mount tie downs for the 2005 Ford F-250. You will need to use the drop...
view full answer... - Recommended Tie Down Options for a 2006 Dodge Ram 3500The best truck bed camper tie down option we have for you is one that mounts to the vehicle's frame. In order to recommend a frame mounted camper tie down option for you I would need to know the bed size, cab type, whether or not you have step boards and what type of hitch you have installed. Once provided I can then offer you my recommendation. In order to secure your truck bed camper to the frame mounted tie downs, I recommend using the TorkLift Locking FastGun Turnbuckles for Frame-Mounted...
view full answer... - Will the Brophy Camper Tie Downs # TDSF Fit a 2013 Ford F150The Stake Pocket Mount Camper Tie Downs, # TDSF, are a universal fit item intended to fit as many trucks as possible. But there is no fit guide available stating which trucks are compatible. It is still very likely that they will fit your 2013 Ford F-150. These should clear the sides of your box and eliminate the rubbing you are experiencing. You may also be interested in the Camper Tie Down Hardware Package # TDHP to secure the camper to the tie-downs.
view full answer... - In-bed Camper Tie Down Recommendations for a 2009 Dodge Ram 1500The Extang CargoCleats Truck Bed Tie-Down Anchors - Clamp On - 500 lbs - Qty 2 # EX1932, have a weight capacity of 500 lbs each. You will have to also make sure that the straps that you use also have enough strengths for the application. The tie-downs fit underneath the bed rails like in the video I have linked for you. Provided there is nothing in the way they could fit your 2009 Dodge Ram 1500, they are a universal fit, but will not work if you have the OEM bed rail cap installed. Since...
view full answer... - Camper Tie Down Recommendation for a 2011 Ford F-150 HSSF and TDSF ComparisonThe Brophy Camper Tie Downs, part # TDSF can be used on campers that have a total length of up to 8 feet in length. The Brophy Camper Tie Downs, part # HSSF can be used on any size campers. There is no weight capacity rating on the camper tie downs and they will work for any camper size that is properly sized for your 2011 Ford F-150. The Brophy # TDSF mounts into the truck bed stake pocket, where as the Brophy # HSSF tie downs wrap around the bed, not in the stake pockets, and are...
view full answer... - Camper Tie Down Recommendation for a 2006 Ford F-350 DuallyThe # HSSF should work well as a tie down system for your 2006 Ford F-350. But you may want to check out # TDSF to see which would work better for your application. I contacted our representative at Brophy about the differences between the Tie Down Anchor, part # TDSF, and the Camper Tie Down, part # HSSF. Part # TDSF can be used on campers that have a total length of up to 8 feet in length. Part # HSSF can be used on any size campers. Part # TDSF mounts into the stake pocket, where...
view full answer... - Brophy Camper Tie Down Recommendation for 2006 Ford F-350 DuallyYes, the # TDSF Brophy camper tie downs are a universal fit for full-size trucks and they will work great on your 2006 Ford F-350 dually. You'll also want the hardware kit part # TDHP to attach the camper to the tie downs.
view full answer... - Truck Bed Camper Tie Down Recommendation for a 2004 Ford F-150 with 6.5 ft Short BedThe Stake Pocket Camper Tie Downs, # TDSF, would be a good choice for your 2004 F-150 with 6.5 ft. Short bed, as long as your camper is not over 8 feet long. A better option, or if your truck camper is longer than 8 feet, would be to use the over the rail Camper Hold Downs, # HSSF. I installed a set of these and took some photos showing how they mount and how the pressure is applied when attached with the Camper Tie Down Hardware, # TDHP. For the ultimate tie down performance, frame mounted...
view full answer...
- Will Brophy Camper Tie Downs, # TDSF Fit a 2002 Ford F-150 and 1,700 Pound CamperThe Brophy Camper Tie Downs, # TDSF, are a universal application for full-size trucks and they will fit your 2002 Ford F-150. These tie downs come with hardware to mount them to your truck, but you will also need the Camper Tie Down Hardware Package, # TDHP, for a complete set up.
view full answer...
Do you have a question about this Camper Tie-Down?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Video Edited:
Patrick B
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Jenny M
Updated by:
Kristina F
Updated by:
Amanda K
Installed by:
Matthew K
Installed by:
Cole B
Video by:
Amber S
Test Fit:
Michael H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
3/12/2024
I agree that it needs to be clearer that the stake pockets work with single walled versus double walled side rails. I am having it added to the tech tips. I will have our Customer Service team reach out to you to discuss returning them.