Brophy Stake Pocket Mounted Camper Tie-Downs - Bed Mount - Qty 4
(310 reviews)
Price: $118.22
In Stock
Brophy Stake Pocket Mounted Camper Tie-Downs - Bed Mount - Qty 4
Item # TDSF
Our Price: $118.22
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (310)
- Q & A (0)
- Photos
Brophy Camper Tie-Downs - TDSF
- Front and Rear Tie-Downs
- Brophy
- Bed-Mounted
- Powder Coated Steel
Steel brackets permanently install into the stake pockets of your non-dually, full-size pickup for a convenient, integrated camper tie-down. Creates a dependable anchor point for mounting your lightweight camper. For campers up to 8' long.
Features:
- Creates attachment points for securing your camper to your truck bed
- Turnbuckles (sold separately) required to attach camper to tie-downs
- Fits tightly into the stake pocket with built-in spacers
- Spacers can be pried off to give you more wiggle room for installation
- Resists corrosion and rust with black powder coated steel
- Mounts permanently in your truck's stake pockets - drilling required
- Locks tie-downs into the truck bed side rails with metal tabs
- Includes 4 camper tie-downs and installation hardware
- Made in the USA
Specs:
- Application: most full-size, non-dually pickup trucks with straight fenders and single-wall construction (for exact fits, enter in your vehicle's year/make/model above)
- Compatible with drop-in bed liners and side-step beds
- Works with truck bed campers up to 8' long
- Dimensions: see diagrams below
- 1-Year limited warranty
Simple, Secure, and Convenient
Installing these tie-downs is pretty darn simple. They'll just slide into the stake pockets on your truck and you'll drill in some bolts through the pockets and the top of the rail to secure them. They fit snugly and there's no guesswork about where they mount on the rail. Tucked into the stake pockets, they're conveniently out of your way if you want to use your bed for hauling something other than your camper.
Securing your Camper
To secure your camper to your truck, you'll also need a tie-down hardware package consisting of turnbuckles, S-hooks, and chains (TDHP - sold separately). This hardware attaches to the anchors on your camper to the tie-downs on your truck to keep your camper secure safely mounted. Once you tighten the turnbuckles to the correct level of tension (not too tight!), you'll be good to hit the road.
TDSF CR Brophy Truck Camper Stake Well Tie Downs for Slide In Truck Camper - Bed Mount - 4 Pack
Installation Details
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Brophy Stake Pocket Mounted Camper Tie-Downs - Bed Mount - Qty 4 - TDSF
Average Customer Rating: 4.4 out of 5 stars (310 Customer Reviews)
Steel brackets permanently install into the stake pockets of your non-dually, full-size pickup for a convenient, integrated camper tie-down. Creates a dependable anchor point for mounting your lightweight camper. For campers up to 8' long.by: Francisco06/30/2023
Used these on my 2012 Tundra Crew max Had to put in more effort in the installation then the instruction tell or show.
for example the truck pockets where these slide into I had too cut the plastic that was covering the holes,
I removed the tail light on one side to get the top bolt screwed in.
I had to remove the gas cap and plastic to secure the top bold.
I also added bigger washers cause there are existing hole that hold the factory plastic so the nut couldn't slide out and away.
Other then that these mount work great
by: Eric03/03/2024
Not compatible with 99 Ford F-150, even though the description said it was. Stake pockets are double walled on this truck. Bolts too short. Very frustrating.
by: Ken05/03/2016
I was hesitant about getting these because I wasn't sure if they would fit. I have a '65 Chevy C-10 and was concerned they would not work because any more, everything is about all the new vehicles on the road, not the oldies. But after consulting with the people at etrailer, I ordered them and couldn't have been happier. I did have to remove the metal tabs (they pry off), but after that, I measured, marked, drilled, and installed the tie-downs in about 20 minutes tops. Loaded the camper and the tie downs worked great. Took it camping 4 times so far and the tie downs are still solid as a rock. Thanks etrailer!
by: Gregory01/25/2019
Overall, very simple and easy to install the Brophy tie downs. The hardware was honestly garbage.. weak grade that undoubtedly would not hold up to this weight and movement. Used heavy duty bolts to secure it to bed rails and stake pocket. So far, 200 miles driven in snow without much movement, but a bit worried about the longevity of the tie downs. This camper will stay permanently in the bed of the truck, so I will throw in some through bolts into the bed of the truck (peace of mind). Turn buckles seem to be good (other than a factory snag that sliced me open). So far happy with the product, could have been made a bit better for an extra cost; I definitely would have paid more for a two sided stake pocket bolt through. With only one tab for mounting to top side of bed rails this seems excessively weak.. do you see the gap in the stake pocket? It was seated when drilling and lagging it down. Started to turn under pressure.
by: Patrick P.07/06/2016
Installed easily. Had to us longer bolts for the back two posts on my 2003 Dodge Ram 2500 4X4 Quad Cab. Also, had to trim some the factory plastic bed liner. No big deal. I took it for a test drive and one of the back brackets seems to twist a bit. I loosed the turnbuckles a little and it is better. I guess I had them too tight. I will be taking the camper on a mini-getaway and will add any new developments. So far, very happy with the product!
by: Drew09/04/2022
Didn't fit my truck. Customer service was greT though in getting me the correct frame mount brackets for tie downs.
Drew
9/5/2023
Excellent no issues
by: Matthew 05/09/2024
Fast perfect fit
MADE IN USA
by: John08/20/2023
Not strong enough, on a rough 1 mile dirt road to get into the ranch we stay at, the rocking twisted the Brophys. Had a local Albuquerque trailer dealer install heavier duty frame mounted tie downs.
by: James03/24/2022
Told the would fit my truck but they did not. Thru them in scrap pile
Jenny N.
3/31/2022
I see that you had contacted us and advised that you had a 2010 F 150 truck that was built in September of 2010. There are cases where a late in the model year build is actually the next years build which means that the 2010 would have a 2011 frame design. Since these tie downs only fit up to 2010, it would cause a non fit for you. You will want to reach out to Ford to confirm the build design year of your truck.
by: David R03/17/2024
I like the tie dowms,don't have new truck yet to see how they fit.
by: Ryan05/30/2023
Good product. Only problem is with packaging, the painted black parts should be wrapped to prevent chipping which exposes the bare metal. Box contained stacked parts which were banging around in the box resulting in chipped paint...early deterioration potential from rust, and not new appearance.
by: Andrew03/31/2018
After a few slight modifications the brophy camper tie downs worked like a champ!
by: Richard09/25/2023
It bent under load
Jenny N.
9/27/2023
I wanted to ask you a few more questions about the tie downs. Do you still have them? How much weight would you estimate your camper weighs? These tie downs are meant to be used for campers up to 8 feet long, including any cab over portion. They are not meant to be used with 2011 and newer trucks.
by: Nate 05/28/2023
product was well built and easy to install. hold Downs feel very solid as installed on the truck. good value for the money.
by: Phill S.08/24/2015
The stake pockets were easy to install with the hardware provided. The dealer I purchased my camper from asked where I had gotten the mounts and I told him about etrailer.com and he was impressed with the mount and tie-down package as an economical package. My only wish was that the powder-coating on the mounts would have been a little nicer, or the packaging a little better. There was a noticeable amount of nicks and scratches in the paint that detract from the appearance. Nothing that affects performance, just cosmetic appeal.
Phill S.
8/31/2016
The Tie-down brackets and tie-down hardware kit are working fine. They are a good, inexpensive solution for securing my camper to my pick-up.I appreciate the follow-up. You folks are great to work with.
by: Jim K.10/15/2016
This set of Brophy stake pocket tie downs came with a note in the instructions that they would not work for any vehicle newer than a 2011. My RAM 2500 has the ABS bed caps on the side. I removed them and enlarged the stake pocket holes using the pre-stamped template on the bed caps. Once I reinstalled the bed caps, the camper tie downs dropped into the stake pockets. I had read other reviews that the lag bolts were prone to stripping out. So I drilled 3/8" holes through the bedside and through the camper tie downs. Then I welded a 3/8" nut on the backside of the camper tie downs. Now all is well and secure. I think this is a good product, and I prefer it over the Brophy camper tie downs that clamp to the lip of the bed. I just wish there was a securement method that didn't involve lag bolts.
Jim K.
10/17/2017
Im still very pleased with the product
by: Trinity11/24/2022
Quality parts, however the mounting holes were not usable. Had to drill new holes in the rear set, also had to use self tapping screws instead of the hardware that was supplied.
Jenny N.
11/25/2022
You mentioned that the mounting holes were not usable and I wanted to see if you could explain in more detail what you mean? Would you be able to send pictures?
by: Dennis03/29/2018
Great for use on the 85 Chevy dually. Fit was ok, held the medium four star camper pretty good. Not sure if want them holding a medium or large camper on a newer truck, the thick sheet metal on the old trucks aide the brackets. The brackets themselves are sturdy and I bet would not been before the truck or camper broke in half.
Dennis B.
3/30/2019
Great, finish is durable. Still function properly, did not cause wear on the truck
by: Adam08/30/2022
I have a large truck bed camper on my 1991 Dodge W250 that I tried these on. I went this route because I didn't want to spend $2k on Torklift mounts and Fastguns. These came on time and installed super easy, but just had too much flex for me to be comfortable with the size of my load. Ended up going the Torklift route and couldn't be happier. This is a decently made product, just not for me.
by: Joe D06/20/2020
Great product and reasonably priced.
I made a few modifications because I didn’t think they were secure enough on the truck
They are now bolted on in 2 places to ease my mind. Pics attached
by: Michael11/04/2022
They don't seem to be rigid enough. They bent really bad when I was on a rough road. That caused the camper to be loose which wasn't good for my taillights.
by: Chad07/26/2023
Works perfect for what I needed
by: Dave08/24/2022
Stout materials, but they dont fit the stake pocket very well. They are loose in the pocket and are expected to be held in place with a few screws/bolts. Mine tilted to one side when tightening the turnbuckles to hold it in place, and dented the top rail of the bed. Next time I will use a frame mounted system.
by: DB03/19/2014
The tie downs arrived quickly and were what I expected them to be with a reasonable price. My only suggestion might be to sell them in pairs instead of 4's. I have an application where I only need 2....Otherwise the etrailer site has worked very well for me.
Db
3/20/2015
Still love etrailer. The tie downs turned to be at the wrong angleposition for my camper so I went another route. But the mistake was mine, so Im keeping them, I have a friend who intends to use them.
by: Craig07/15/2023
Fit and finish. We're perfect.
25
310
Show More Reviews
See what our Experts say about this Brophy Camper Tie-Downs
- Which Brophy Camper Tie Downs Fits 2007 Chevy Silverado 1500HD ClassicThe Brophy camper tie-downs # HSAB will fit your 2007 Chevy Silverado Classic 1500HD and work well. We also recommend hardware package # TDHP. I have linked a video review for you.
view full answer... - Will Stake Pocket Mount Camper Tie Downs Fit a 1989 Ford F-150Since you have a full size Ford truck you can use the camper tie downs # TDSF. I have linked the instructions for you. I also recommend using the camper tie down hardware package # TDHP.
view full answer... - Will Brophy Camper Hold Downs # HSSF Fit a 2011 Chevrolet Silverado Extended Cab, Long BedThe Brophy Camper Hold Downs, part # HSSF, will fit your 2011 Chevrolet Silverado extended cab, long bed as long as you do not have a slide-in bed liner. They will work with a spray-in bed liner. There is not a weight capacity rating for these hold downs and they are designed to work for any camper that is a correct fit for your vehicle. The hold downs do not fit in the stake pockets but wrap around the bed rails and are mounted inside the bed. If you are wanting to use a stake pocket...
view full answer... - Camper Hold Down Recommendation for a 1998 GMC C/K 1500 Series Short BedThe Stake Pocket Camper Tie Downs, # TDSF, are not for use on 1988 or newer Chevrolet or GMC trucks. Instead, I recommend the Camper Hold Downs, # HSSF. These wrap around the bed instead of fitting in the stake pockets. I also recommend the Camper Tie Down Hardware Package, # TDHP.
view full answer... - Stake Pocket Tie Down Recommendation for a 2010 Ford F-150The Brophy Camper Tie Downs, part # TDSF can be used on campers that have a total length of up to 8 feet in length. As long as the fenders on your truck are straight and not flared these would fit and work well for you. You would also need the hardware kit part # TDHP if you do not have it already.
view full answer... - Which Brophy Camper Tie Downs Will Fit A 1991 Dodge W250?The Brophy Stake Pocket Mounted Camper Tie Downs # TDSF is a universal item made to fit most full-size trucks. that being said I did give the manufacturer a call, and they confirmed that it will fit, as long as your campers length to include any cab over-hang is under 8-ft long, they will work. If your camper is longer than 8', you will need the heavier duty # HSSF tie downs. Additionally, you will need the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs # TDHP. These will...
view full answer... - Which Truck Bed Camper Hold Downs for 2007 Chevy SilveradoCR Brophy recommends the # HSSF hold-down brackets for your 2007 Silverado, as it won't require any drilling to install. The HSSF isn't compatible with drop-in bed liners, but it will work with spray on liners. The underside of the lip on the top of the truck bed sidewall need to be at least 2 inches wide in order for the hold down to install. Brophy only sells the hold-downs in sets of 4. A tie-down hardware package is available as part # TDHP. I'll link you to a video showing how the...
view full answer...
- Camper Tie Down Recommendation for a 2012 Ram 3500The 2011 and 2012 model Rams cannot use the # TDSF but there is a solution that will work. Instead you would want the Brophy Camper Hold Downs part # HSSF as these are confirmed to work on your truck. We had a customer with a 2012 Ram just like yours leave us a review and say they worked well for him. I attached a review video for these for you to check out. You will also want the Camper Tie Down Hardware Package # TDHP.
view full answer... - Determining Fit of Camper Tie Downs for 2012 Ford F-150 Super Crew CabYou can determine which models of camper tie downs will work on your 2012 F-150 Super Crew Cab by using the link provided. At the top of the page is a drop-down menu where you can select your truck's exact configuration to then see compatible products. Bed length comes into play and the presence of running boards will pose an issue. The Brophy Camper Tie-Downs that you referenced, part # TDSF, fit many domestic pickups that are single wall construction with straight fenders. Check your...
view full answer... - Recommended Camper Tie-Downs for a 2008 Ford Ranger Extended Cab 4x4 6 Foot BedThe Brophy stake pocket camper tie downs part # TDSF will fit most full-size pickups with straight fenders and single-wall construction. Since your 2008 Ford Ranger extended cab is considered a compact pickup truck, the Brophy stake pocket camper tie downs won't be a fit. If your Ford Ranger has a 6 Foot Bed - without running boards or steps underneath the truck bed, and with a factory installed hitch, then use # TLF2013 for the front and # TLF3004 for the rear. If your Ranger has a 6...
view full answer... - Truck Bed Tie Downs for a 1995 Ford F-150 and Light Weight 8-1/2 Foot CamperFor your 1995 Ford F-150 and camper, I recommend the Camper Hold Downs, # HSSF. The hold downs do not fit in the stake pockets but wrap around the bed rails and are mounted inside the bed. There is no weight capacity rating on the hold downs and the will work for any camper size that is properly sized for your vehicle. I also recommend the Camper Tie Down Hardware Package, # TDHP, which has a weight capacity of 3,000 pounds.
view full answer... - Fitment of Brophy Stake Pocket Mounted Camper Tie Downs 2020 Toyota TacomaThe Brophy Stake Pocket Mounted Camper Tie Downs, # TDSF will work with your 2020 Toyota Tacoma. This comes with 3 removable spacers to allow a tight fit in your stake pockets. I recommend the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs, # TDHP. This turnbuckle will expand from 7-5/8 inches to 20 inches and with the included chain and S hook can reach up to 19-3/4 inches.
view full answer... - Will Brophy Camper Tie Downs Work On 2006 GMC SierraThe Brophy Stake Pocket Mounted Camper Tie Downs, Item # TDSF, are geared more for full-size, non-dually pickups with straight fenders and a single wall construction. The TDSF system might work with your 2006 GMC Sierra so long as your camper is 8 foot or less. The stake pocket tie downs are permanent installation into your stake tubes. A better option that has a more universal fit is the Brophy Clamp On Camper Tie-Downs, Item # HSSF. The Brophy HSSF system uses powder coated steel...
view full answer... - Camper Tie Down Recommendation for a 1998 Dodge Ram 3500The portion of the Camper Tie Down part # TDSF that inserts into the stake pocket of the truck measures 1-7/8 inches wide by 1-5/8 inches deep. Based on the dimensions you listed they wouldn't fit as they would be 1/8 of an inch too deep. A better option would then be the Camper Hold Downs, # HSSF. I attached a picture that shows how these will look when installed. You will also need the hardware kit part # TDHP. You should only need 4 of these to secure your camper. These are only sold...
view full answer...
- Camper Tie Downs for a 2006 Ford F-150 SupercrewThe measurements and requirements of the hold downs and the bed sides on a 2006 Ford F-150 are not compatible so you that is why you cannot use # HSSF. You may be able to use stake pocket mount tie downs # TDSF. Take a look at the instructions I have linked and compare them to your truck to ensure fit. With this tie down kit you can also use tie down hardware # TDHP.
view full answer... - Will the Brophy Camper Tie-Downs # HSAB Fit a 2011 Chevy 2500HDAs long as the bed of your 2011 Chevy Silverado has access to the under side of the bed rails and a minimum of 2 inches between the lip of the bed rail and the side wall (see photo), the Brophy Camper Tie-Downs, # HSAB, should fit. These are a universal-fit item that were designed to fit as many truck beds as possible. If you have access to the stake pockets and the camper is 8 ft long or less, then you may be interested in the Stake Pocket Tie-Downs, # TDSF. In addition to the tie-downs,...
view full answer...
- Brophy Truck Bed Camper Tie Downs for 2009 Ford F-350As long as the underside of the bed rail lip is at least two inches wide (see diagram I've provided for you), the CR Brophy # HSSF camper tie downs are what I'd recommend. You'll also need the tie-down hardware package, part # TDHP which includes the S hooks and turnbuckles. If you click the link, you can see a demonstration video showing how the tie downs work.
view full answer...
- Camper Tie Downs that Fit 2018 Ram 3500 DuallySince the rear fender flares of a dually are so wide there aren't any bed mounted camper tie downs that will work for your 2018 Ram 3500 but we do have frame mounted options that would work. The frame mounted tie downs provide a much more secure solution so it is the better way to go. So for that you'd want the part numbers # TLD2131 and # TLD3109. The Brophy Camper Scissor Steps - 4 Steps # AS24 that you referenced weighs 28 lbs.
view full answer... - Camper Tie-Downs For 2013 GMC Sierra 1500 The BROPHY Camper Tie Down, part # TDSF you referenced is not designed as a fit for your 2013 GMC Sierra but we do have another solution. I recommend part # HSSF. if you have access to the underside of your bed rails. These tie-downs use a clamp-on mounting system that grabs the underside of your bed rails. I have attached a photo that shows how this system is mounted on a truck. I have attached a link to an installation video for these tie-downs you can check out. If you decide on the...
view full answer...
- Will the Universal Stake Pocket Camper Tie Down fit on a 2006 Dodge Ram 2500Yes, the stake pocket camper tie downs, # TDSF, will work on the 2006 Dodge Ram 2500, as long as the overall length of the camper you are using them with is 8 feet long or less, this measurement includes the overhang over the cab of the truck. You will need to drill one 11/32 inch hole and two 7/32 inch holes for this installation, and there are spacer tabs on the tie downs that may need to be pried off for a proper fit in your stake pockets. If your truck campers overall length is longer...
view full answer... - Fit of CR Brophy # HSSF Truck Bed Camper Tie Downs on 2007 Toyota TundraCR Brophy, the manufacturer of the # HSSF tie downs did not test fit on the 2007 Toyota Tundra, so they can neither confirm or deny the fit. I was told that if the bed is single walled and the lip under the bed side is at least 2 inches wide, the tie town should fit (see photo). Torklift offers tie-downs that are a confirmed fit, you can see the different fits available by clicking the provided link.
view full answer...
- Stake Pocket Camper Tie Downs for a 1991 Chevrolet Pickup TruckYes, the Brophy Camper Tie Downs, # TDSF, will work for your 1991 Chevrolet Pickup. Keep in mind, these tie downs are for campers up to 8ft only. We recommend using the camper tie down hardware kit, # TDHP, with these tie downs. If your camper is longer than 8ft, then I recommend using the Brophy Clamp On Tie Downs, # HSSF. This kit clamps around the top of the bed rail and requires a minimum of 2 inches underneath the lip of the bed rail. If you have a bed liner, it may need to be modified...
view full answer... - Using Frame Mounted Camper Tie Downs with Wheel to Wheel Running Board on a 2017 Nissan Titan XDI do have both front and rear camper tie downs that are a confirmed fit for your 2017 Nissan Titan XD. The TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLN2410 is for the front and the TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLN3404 is for the rear. However, you will need to remove your wheel to wheel running boards in order to install the rear frame mounted camper tie downs. None of TorkLift's frame mounted camper tie downs are designed to be used with wheel to...
view full answer... - Camper Tie Down Recommendation for 2013 RamYes, the stake pocket camper tie downs, # TDSF, will work on the 2013 Dodge Ram, as long as the overall length of the camper you are using them with is 8 feet long or less, this measurement includes the overhang over the cab of the truck. You will need to drill one 11/32 inch hole and two 7/32 inch holes for this installation, and there are spacer tabs on the tie downs that may need to be pried off for a proper fit in your stake pockets. If your truck campers overall length is longer...
view full answer...
Do you have a question about this Camper Tie-Down?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Video Edited:
Patrick B
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Jenny M
Updated by:
Kristina F
Updated by:
Amanda K
Installed by:
Matthew K
Installed by:
Cole B
Video by:
Amber S
Test Fit:
Michael H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
3/12/2024
I agree that it needs to be clearer that the stake pockets work with single walled versus double walled side rails. I am having it added to the tech tips. I will have our Customer Service team reach out to you to discuss returning them.