Demco Stay-IN-Play Duo Braking System for RVs w/ Hydraulic Brakes - Wireless Monitor - Proportional
Item # DM86VR
Retail:$1,590.00
Our Price: $1,349.00
You Save: $241.00
Confirmed to Fit
2012 Subaru Impreza
excluding WRX
WRX
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (582)
- Q & A (0)
- Photos
2012 Subaru Impreza - Demco Stay-IN-Play Duo Braking System for RVs w/ Hydraulic Brakes - Wireless Monitor - Proportional
- Brake Systems
- Hydraulic Brakes
- Proportional System
- Demco
- Fixed System
- Power Assist Brake Compatible
Plug in and go: this permanent system gets you smooth, reliable braking with a one-and-done installation. Low-profile components stay out of sight. Includes convenient wireless Coachlink.
Features:
- Guarantees smooth, reliable braking
- Reads RV's brake light signal to ensure system only activates when you actually hit the brakes
- Senses the rate of your RV's deceleration and triggers your towed car's brakes to slow down at the same rate
- Lets you adjust braking sensitivity to suit your vehicle and your preference
- Plug-and-play
- System automatically turns on when your towed car is connected to the RV
- Components install permanently and stay tucked out of sight
- Monitors your towed car's braking with the wireless Coachlink
- LEDs lights up and alarm beeps when the brakes are applied
- Transmitter connects to reed switch on brake of towed car to ensure accurate reading
- Avoids damage from over-braking by reactivating car's vacuum-assisted braking
- Includes breakaway system and all necessary components
- Made in the USA
Specs:
- Application: motorhomes with hydraulic brakes
- Compatible with hybrids and other cars with continuous-power-assist brakes
- Operating unit dimensions: 8" long x 5" wide x 2-1/4" tall
- 5-Year warranty
"This is the top system I recommend if you have hydraulic brakes. Quality, reliable, tried-and-true. It just always works."
Do I Need a Braking System for Flat Towing?
A braking system is a must when towing a vehicle behind your motorhome. Without it, the weight of the towed car can create a safety hazard, strain your RV's brakes, and affect the warranty of both your car and motorhome. Most states legally require a supplemental braking system, so if you don't use one and you end up in an accident (which is more likely since your RV takes longer to come to a full stop), your insurance and liability headache just doubled. You also won't have any breakaway system; if there's an accidental disconnect, there's nothing to bring your car to a stop.
Pros of a Permanent System
The Stay-IN-Play Duo is a permanent braking system, which means that it's a one-and-done. Once it's installed, there's no more setup that you have to do. When you plug in the power cord at the front of your vehicle, the system automatically turns on. Flip the on switch for the G-Force controller and just like that, you're ready to flat tow.
While the components are installed permanently in your RV and toad, they remain concealed and inconspicuous. None of them will interfere with normal driving, and most of the time they are invisible. And you don't have to find a place to store them between trips.
How Does the Demco Stay-IN-Play Duo Work?
The Stay-IN-Play Duo is unique in that it uses both an inertia sensor and your motorhome's brake light signal to activate. Having this double-check ensures that the system will only activate when it's truly needed.
First, the Duo monitors your motorhome's brake light signal so that it knows when you're intentionally hitting the brakes. This ensures there's no false braking.
Second, the inertia sensor in the Duo senses the change in momentum of your toad (towed vehicle) as your setup slows down. It precisely measures this change so it can activate your toad's brakes to match the rate of the RV's deceleration; this is what makes it proportional. When you apply the brakes in your motorhome, the braking system will engage the brakes of the toad at the same time with the same amount of force. This keeps the RV and the toad in sync with each other, so whether it's a gradual slow down to a red light or a hard stop in an emergency, the toad and the RV will brake together.
It starts with the G-Force controller. The G-Force controller contains the inertia sensor that senses the change in your RV's momentum. You'll install it in the cab of your toad, underneath the dashboard. This keeps it out of the way but easy to reach so you can flip the toggle and adjust the knob.
Note: The G-Force controller must be pointed in the direction of travel - with the toggle switch facing the driver's seat - for the internal sensor to function properly.
The controller lets you adjust the sensitivity of the inertia sensor to determine how drastic the change in momentum must be for the system to trigger. Set the sensitivity low and the Duo will only engage when you forcibly step on your motorhome's brake pedal. Set it high and a mere tap on the brakes will get a reaction. It's totally up to you how sensitive you want it to be; a heavier vehicle will probably need more sensitivity, while a lighter one doesn't need to brake so hard. The knob on the face of the controller lets you easily program your setting.
When the G-Force controller detects a change in inertia, it checks that there's a brake light signal from the RV to confirm that it is indeed braking. It then sends a signal to the main operating unit to activate; the main unit delivers pressurized air through an air line to the actuating cylinder that attaches to your toad's brake pedal. The cylinder will pull the pedal down, applying your brakes almost instantaneously.
The actuating cylinder attaches permanently to the arm of your toad's brake pedal. Though it is permanent, it should not interfere with your everyday driving. In most vehicles, it is tucked up where you can't even see it.
Vacuum Pressure Creates Smooth Braking
When you're drivng, your vehicle uses vacuum pressure to create the force needed to bring the car to a stop. On most vehicles, this vacuum-assist function does not work when the engine is off. As a result, a lot of supplemental braking systems have to use an excessive amount of pressure while braking the toad.
The Duo, on the other hand, reactivates the vacuum-assist function by tying into your car's vacuum line. Your car will break evenly and naturally as it's being towed, so there's less risk of damage.
Built-In Safety Features
Included in this kit is the wireless Coachlink for safety and peace of mind. This monitor, sitting on the dashboard of the RV, will light up and beep whenever your toad is actively braking. This will give you a simple and convenient way to keep tabs on whether the system is working properly or if something is going wrong.
Most supplemental braking systems have a method of letting you know you when they activate, but not all of them are checking if the toad is actually braking. There could be an error that causes the system to activate without actually applying the toad's brakes. Or your brake pedal might actually be continuously depressed when it shouldn't be. But unless you have a system that's monitoring your vehicle, you won't know it until the damage is already done.
The Duo also comes with a breakaway switch, an absolute must for safe flat towing. If there's ever an emergency situation where your toad becomes detached from the motorhome, the breakaway switch will immediately activate the brakes and bring the vehicle to a stop.
This switch mounts to the front of your toad and wires into the Duo's operating unit. It includes a pin that connects to your RV's hitch receiver with a breakaway cable. If the toad and RV become disconnected, the cable will pull the pin out of the switch and trigger the braking system. A reserve air supply in the operating unit will then apply the brakes in the car.
What You Need to Flat Tow
Flat towing can be a much more convenient way to take your car RVing with you than using a trailer or a tow dolly. It'll save you storage space both at home and at the campsite, and it takes less time and hassle to hook up.
To flat tow your vehicle, there are 5 basic components you're going to need: a tow bar, a base plate kit, a safety cable set, tow bar wiring, and a flat tow braking system.
| For the RV | Between the RV and Towed Car | For the Towed Car |
|---|---|---|
| Hitch | Tow bar | Base plate |
| Wiring plug | Safety cables | Braking system |
| Wiring adapter cord | Wiring kit/diodes |
The custom-fit base plate installs on the frame of your toad so you can connect the car to your RV with a tow bar. Hook up safety cables between the vehicles to ensure that the toad does not separate from the motorhome if the tow bar becomes detached. Tow bar wiring syncs your vehicle's signal lights with your motorhome's tail lights, as required by law in most states. Finally, the flat tow braking system - also required in most states - activates the brakes in the toad when you hit the brakes in the RV, making for smoother, safer braking, and preventing wear on your motorhome.
9599018 Demco SBS - (Formerly SMI) Stay and Play DUO Supplemental Braking System for Motorhomes with Hydraulic Brakes with Wireless Coach Link Braking Monitor - Proportional
Installation Details
Alternate Instructions
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Too difficult to install
Customer Reviews
Demco Stay-IN-Play Duo Braking System for RVs w/ Hydraulic Brakes - Wireless Monitor - Proportional - DM86VR
Average Customer Rating: 4.8 out of 5 stars (582 Customer Reviews)
Plug in and go: this permanent system gets you smooth, reliable braking with a one-and-done installation. Low-profile components stay out of sight. Includes convenient wireless Coachlink.by: Jim05/02/2024
2023 Jeep Wrangler
I installed this system in a 2023 2 door Wrangler. I also used an etrailer base plate and etrailer tow bar. I had originally purchased a Demco Delta Force Braking System. However, with the shape of the floor in the Jeep I was unable to use this unit. There are various places to install the stay n play duo in the Wrangler and the etrailer installation videos show this. I elected to install mine under the drivers seat as I wanted to keep it out of the elements. I fabricated a sheet metal bracket to mount it on that allows the rear seat heater duct to function unimpeded.
Once installed the unit is out of sight and very simple to use. Just a flip of the toggle switch and its ready. I only needed to make a few adjustments to have it brake the way jeep the way I wanted. This is also a very simple procedure.
I highly recommend this unit and appreciate all of the information etrailer has on their site to aid in the procurement and installation of their products.
by: Deborah04/20/2023
eTrailer was very helpful in choosing the correct hitch for our rv and car. They also provided a special brake application in the car that makes it super easy for toad braking.
I am 72, and I hook up this toad and pull it with confidence. The instructions to hook up the toad was presented with ease. They knew exactly what they were doing, and we didn't rush through the demonstration. I would recommend eTrailer to anyone.
by: Edward03/13/2024
It took me a couple days to get this installed,I'm not as flexible as I was so that didn't help. However I followed the instruction steps and got it done.Had to adjust the sensitivity a few times until it was the way I wanted.System works good and I get a alarm when brakes are activated. This gives you peace of mind knowing your brakes are not applied when they shouldn't be. Very Happy with it,just have to flip a switch when towing.
by: Tim L.07/24/2023
2023 Chevrolet Equinox
Installed 6/17/23 on a 2023 Equinox LT (AWD). Installation was pretty straight-forward. I mostly followed etrailer's videos. Note that the pneumatic cylinder needs to be mounted fairly high on the brake pedal arm so you have a 'square' profile to clamp onto. This vehicle has an electronic brake booster rather than pneumatic, so follow Demco's instructions regarding this variation. The wireless coachlink works great. I couldn't be happier with this system.
by: 10/13/2023
Very easy install, and the videos on E-trailer helped a bunch! I opted to put the controller and wireless link on the passenger side, because there was more room there, but the controller is still properly orientated. Be sure to leave enough slack in your wiring if you decide to mount the operating unit on the fuse box, so you'll be able to remove the cover later. Happy trails!
by: David 02/21/2024
2019 Ford Fiesta
First I have never installed a braking system before, and I was somewhat unsure if I would be able to complete the install without issues, but this worked exactly as described in the written instructions and provided video's. I took my time to verify each step and that all the electrical connections were solid (very important). Following the instructions and the video made it possible for me to install the system and have it function exactly as described. All you need is some good basic idea of how the system works, how to make electrical connections as well as follow written instructions backed up by video to install this yourself. Of course, having eTrailer there to answer any questions was a major factor for me to purchase this unit from them. If you are thinking about adding a tow vehicle braking system this is the one for you too.
by: Timmy04/11/2024
2023 Jeep Wrangler
I've used this setup for a year towing a 2023 Jeep Wrangler . I 100% recommend it for anyone else. Under normal conditions it is very easy. Under stressful conditions (bad weather, uneven terrain, need to connect/disconnect quickly) it is a life saver.
I am 63 and I can connect/disconnect this in 5 minutes.
by: Terry 03/15/2024
My E-trailer experience was outstanding! From the great selection guide to the delivery to the installation support. The installation videos were very helpful. I had two installation issues that were answered with a prompt phone call. One call was on a Saturday morning. I highly recommend E-trailer!
by: Bill C03/28/2024
I received this yesterday and have not yet installed it. The FedEx driver handed it to me as it was raining. The outer cardboard container was slightly damaged as the packaging is compromised my cutouts so the brand and description show. Overall, I am quite pleased with Etrailer. The vehicle fit information and instructional videos are especially helpful.
by: Lincoln05/04/2021
This is a really nice braking system. It works EXACTLY as described. Engine breaking does not trigger breaking (because it's tied into the break light circuit). And breaking truly is proportional. Light braking and it does not engage activate braking. The remote wireless coach receiver shows you how hard the car is breaking, and IS proportional to the breaking in the Coach. When the car is breaking the wireless receiver shows you, at three levels (the number of lights lit from one light to three) how hard the towed is braking. i HIGHLY recommend the wireless unit for breaking notification.
Instructions were very clear. I studied my 2004 Pontiac Vibe (same as Toyota Matrix), and watched a bunch of online videos on installing this product. This is a particularly good car for a toad, because it is so light. (2700 lbs curb weight -- and it rolls really freely).
Installation was particularly painful under the dash where (as a tall person) I had to contort myself into all kinds of uncomfortable shapes with various padding) to reach up under the dash panel . There is just no easy way I could find to remove the lower dash panel without taking about whole dash board. So just figuring out the cold side of the break switch was very difficult. It was impossible to get a probe on the break light switch plug. I ended up clipping a wire junction connector on to the (green wire coming of the brake switch after unplugging the wire harness) and then probing that after plugging it back in. I guessed right, It's the green wire that is the cold side of the switch. For someone who reads this you don't have to guess. I've done it for you
On this car I was concerned about going through the firewall and puncturing the break booster when mounting the cable terminal for the actuating cylinder. In the end, where I needed to go through the firewall was nowhere near the booster. It also turned out trying to use the self taping screws was just too hard. I wanted to use the reinforcing plate, but ended up loosing it under the carpeting. Finally I decided to just drill a 1/4" hole through the firewall (just northwest of a little dimple in the firewall), and bolt the cable cable terminal to the fire wall with a 1/4x20 combo head machine screw, and a fender washer, lock washer, and nut on the engine side of the firewall. I put silicone on the washers and nut, to prevent corrosion. I had just enough room under the car to get a wrench onto it. It would have been nice to have a car lift in my garage, but I did this work by blocking the car up on jack stands. My son held the bolt on the inside of the car. while I tightened the nut on the engine side of the firewall.
Another problem was: where to mount the operating unit in the engine compartment? I struggled with this until I found an online video of an installation on a Honda, where the tech mounted the operating unit to the engine cover. This worked out well, and made for easy routing of the vacuum lines both to the vacuum line between the engine and the brake booster, and through the firewall grommet to the actuating cylinder.
I mounted the wireless sending unit on the dash at the driver's A pillar, and the control unit on the passenger side, where there was much more room, routing the wires behind the center console over the the drivers side to go through the firewall. Calibration (adjusting the control unit position) worked exactly as describe. I set it and I was done.
In the end, though a painful install process, ESPECIALLY above the foot pedals under the dash, I know I am going to LOVE this system. To setup for towing: just flick the switch on the control unit, and hook up the car. No other special setup is required.
by: John03/16/2024
2020 Chevrolet Sonic
I ordered the wrong braking system. They were very helpful with the return and ordering the right braking system. Highly recommend anyone to deal with etrailer
by: Larry04/04/2024
etrailer is my GO TO place for everything. The people there are fantastic to work with. The go out of their way to assist in anything possible. If you haven't experienced working with etrailer, you are definitely missing out.
by: Jeffrey11/18/2021
These installation photos are for the Demco Duo Play braking system install on a 2018 Ford Fusion Platinum Energy with push button start.
Jeffrey
11/19/2022
I works perfect every trip. I do a hard braking test at the beginning of every trip. The wireless monitor in the motorhome immediately reports the functionality of the braking system. I am very satisfied with this product. I installed everything myself.
by: Michael 09/07/2022
2018 Jeep Wrangler
Works great. It takes some time to install but worth it for the ease of use after. I installed the same system on my 2018 wrangler without the coach link monitor, used it over 4 years and 18,000 miles without a problem. I like the addition of the coach link monitor as the light is right in front of you.
Michael
9/9/2023
1 year with 4,000 miles of use and still working great. No problems.
Mike L.
11/1/2023
@Michael Niice! Glad to hear that!!
by: Bobboots10/21/2023
2017 Mini Cooper
The Duo System took about 8 hours to install on a 2017 mini cooper s 4 door due to tight space everywhere. The etrailer video was very helpful although I atteached to vaccuum line in a much easier location up next to the Vaccuum unit on the firewall. The video also recommended using heat-shrink crimp connectors which are not supplied by Demco. The fuse-holder is also crappy and the 20A fuse has slipped out of the holder with the cover closed, so I ordered a waterproof 20A circuit breaker and tossed the unreliable fuse holder which failed on my first trip. Demco also provides no indicator LED to show that the braking system switch is on and it is powered up and ready to function. This is asafety issue that should be addressed. For the cost of this system, these few simple enhancements would ensure that it works reliably for many years.
by: Victor03/09/2022
2019 Ford F-150
Appears to be working as expected, will be going on our first long trip in April to confirm.
instructions are generic so some judgment calls needed to be made for my 2019 F150 Raptor. I ended up placing the vacuum hose in the booster in the sensor hole, and placing the sensor at the end, rather than splicing into the preformed hose. Not a project to rush thru.
Victor
3/10/2023
Last April 2022 we went on a 2 month 6000 mile journey, pulling steep grades, raging thunderstorms, and some hot and dry days, all without any issues with the braking system. Very satisfied.
by: Ron 10/13/2023
Extremely difficult to install. Installation Instruction need to be interpreted rather than followed.
However, once installed, braking on the toad is amazing. I went from no brakes to this brake system. Significant difference.
by: DIY installation on 2018 Jeep Wrangler JL 4-Dr Unl08/23/2023
2018 Jeep JL Wrangler Unlimited
DIY installation on my 2018 Jeep JL unlimited 4-Dr went perfectly. I watched the video (a 2018 like mine) and followed along as I installed and it turned out just as the video showed. I added marine grade shrink wrap on all of the wire crimps, added the coiled split conduit wherever I could. Trying to Zip tie the wireless transmitter under the dash wasn’t working out for me so I cut two strips of double sided automotive tape and secured it to the metal dash support. Then I installed the towed vehicle wiring kit again following the Jeep JL videos. A lot of crawling around fishing the wiring through the side box railing…but doable. The only tedious part of this installation was finding good spots for mounting the emergency brake plug and the 6-way outlet on my heavy duty aftermarket winch mount bumper. My towed vehicle battery maintainer wiring should arrive shortly to complete my wiring.
Lastly, I ordered adapter 1” D-Ring brackets to fit the Roadmaster Nighthawk tow bar (checked with Cliffs in Scottsdale to inspect my aftermarket bumper first)….fit like a glove and easy to install on the tow bars. Fingers crossed and did the function tests and all worked as designed! I would add photos but the videos look identical to my application.
by: Hans04/13/2022
Jeep
This system is time consuming to install but with the help of the etrailer videos the install went well. I really love the system. I have towed my Jeep with my RV a few times down some really steep grades and the system works awesome. The beauty of the system is when you are done towing, you disconnect the tow bars and safety cables, unplug the breakaway cable and brake/turn signal cable, switch off the control unit and your done! Preparing for the tow is just the reverse. I did consider many other types of systems and models, but I'm really happy with the Demco Stay-in-Play Duo. The Wireless Coachlink monitor is also awesome.`
Hans
4/17/2023
I have used the system several times over the last year and I am very pleased on how great it works. We have really tested the system on some steep grades with no problems.
by: Justin 10/10/2022
Etrailer videos made this a pretty simple install. So far so good.
Justin
10/12/2023
Everything is working how it should be.
Mike L.
11/4/2023
@Justin That's great to hear! We're glad your Demcon # DM86VR braking system is working well for you!
by: Glampur07/28/2023
What a great auxiliary braking system. I was a little apprehensive about installing this system myself on my 1999 Jeep TJ SE, but I found hte instructions to be well written and once I read through them several times and then took my time to follow them step by step the overall installation was pretty straight forward. I wont lie the installation took about 8hrs for me to complete, with one call to their support line which was excellent by the way!I had a question on the diodes. They answered my question and offered great support. Once installed and calibrated, the braking system worked as expected, actually better than expected. I really like the remote monitor which allows me to see when the brakes are applied on the Jeep from within the cab of my RV. I highly recommend this system....
by: Kathleen08/11/2023
Braking system worked great on my Jeep. We towed the vehicle on a 6000 mile journey this year. We were up and more importantly, down the Rocky Mountains and the braking system never failed us. Would definitely recommend.
by: 04/08/2021
Works great. Self installed on 2018 Ford F150 without much difficulty. I recommend watching etrailer install video. Mine has wireless duo monitor. Extra care needs to be used when splicing into tiny brake light switch wire. If bad connection is made truck will not shift out of park.
by: Gary06/06/2022
Great braking system. Installation directions were good and clear, but there are a lot of steps. It is easy to adjust properly once installed and has worked flawlessly for 2500 miles towing my 2015 Subaru Forester.
by: Jim07/07/2023
Been a year now. Unit works as well as ever. Installation was not bad. Have a 4 post lift so wiring the rear lights on my 2022 wrangler was simple. Braking while driving motor home needed some fine tuning before hitting the road but once dialed in it works great.
25
582
Show More Reviews
See what our Experts say about this Demco Tow Bar Braking Systems
- Recommended Parts to Flat Tow 2022 Jeep Wrangler UnlimitedWe can definitely get your 2022 Jeep Wrangler Unlimited set up to be flat towed with all the best parts. I'll go ahead and list them out for you below then detail why: - Base Plate Kit: Roadmaster Direct-Connect Base Plate Kit # RM-521453-5 - Tow Bar: Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar # RM-676 - Wiring Kit - Jeep WITHOUT ParkSense Proximity Sensors: Roadmaster Hy-Power Diode Wiring Kit # RM-154 OR Wiring Kit - Jeep WITH ParkSense Proximity Sensors: Roadmaster Wiring...
view full answer...
- Parts Needed to Flat Tow a 2019 Lincoln Navigator 4x4From what I could find in the owners manual I located online you can only flat tow your 2019 Lincoln Navigator 4x4 if you have "Slow Climb Mode". If you have the slow climb mode then you will need at least 5 main parts to flat tow. Those parts are a base plate kit, tow bar, safety cables, tow bar wiring and a supplemental braking system. I have included each of those parts below, along with a brief description of their purpose and a recommendation. Base Plate Kit: This is a custom fit...
view full answer... - Can a BlueOx 6500 Pound TowBar Be Used To Flat Tow A 2014 Dodge Ram 1500 Eco DieselYes you can use the Blue Ox Alpha 2 Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 6,500 lbs # BX7380 to flat-tow your Dodge Ram. The typical 2014 ram 1500 Laramie 4x4 ecodiesel curb weight is 5,308 pounds. If you need the other parts to complete the flat tow package I recommend these to complete it. The Roadmaster Universal Hy-Power Diode Wiring Kit # RM-154. This is a custom fit wire harness that will connect your RV's tail, brake and turn signal lights to your towed car's lighting...
view full answer... - Parts Needed to Flat Tow 2019 Ford F-150To flat tow any vehicle, you will need a base plate kit, tow bar, safety cables, tow bar wiring, and a supplemental braking system. I suggest the Roadmaster EZ4 Base Plate Kit, # RM-524431-4 for your 2019 F-150. These are confirmed to fit this truck and feature a hidden bracket design that will give your truck a nice, clean look. I highly recommend the Roadmaster Falcon All Terrain, # RM-522 as this tow bar has a weight capacity of 6,000 pounds and a non-binding design that will allow...
view full answer... - Base Plate Kit For a 2017 Jeep Wrangler Sport Using a Blue Ox Aventa LX Tow BarI do have an option for you, but the Blue Ox Base Plate Kit # BX1133 (Winter Edition) is not the correct base plate kit for your 2017 Jeep Wrangler Sport Edition. Instead, you would want to use the Blue Ox Base Plate Kit # BX1126 which works with standard bumpers with no winches or guards. This base plate kit will work with your Blue Ox Aventa LX tow bar. I have also listed a few other parts you may need for flat towing if you do not already have them. - Demco Stay-IN-Play DUO Supplemental...
view full answer...
- Can You Use a Tow Bar on a 2021 Ford Bronco if There Are No Tow HooksYes, it is possible to use a tow bar with your 2021 Ford Bronco Sport. You will just need to use a base plate kit. The Roadmaster Direct-Connect Base Plate Kit # RM79RR is confirmed to fit the 2021 Ford Bronco with a standard bumper. This would allow you to use a tow bar like the Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar # RM-676. The # RM-676 tow bar also includes safety cables which is an essential flat towing part. You would also need a supplemental braking system and tow...
view full answer... - Crossbar Style Base Plate For Flat Towing A 2011 Jeep Wrangler With Standard BumperWe have what you need. The Roadmaster Crossbar-Style Base Plate Kit - Removable Arms # RM-521448-4 will work with the etrailer XHD Non-Binding Tow Bar for Roadmaster Crossbar Base Plates - 2" RV Mount - 10,500 lbs # e64ZR. You will also need a few more items to complete the set up. I will list them out for you. You need the Demco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor - Proportional # DM86VR. This will keep you safe and legal. You need to sync your...
view full answer... - Blue Ox or etrailer Base Plates For 2021 Jeep Cherokee For Use With Demco Tow BarWhile I can't speak to price differences, what I can tell you is that for your 2021 Jeep Cherokee (so long as it is not an Overland or Trailhawk model), since you have a Demco tow bar like the Demco Excali-Bar III # DM9511013 (or an earlier version of the Excali-Bar), I recommend the etrailer Invisible Base Plate Kit # e98953. There isn't any difference in function or any noticeable difference in install between the Blue Ox Base Plate Kit # BX1144 and the etrailer # e98953, so the only...
view full answer... - 2014 Chevy Suburban etrailer Base Plate Kit Fit and Parts to Flat TowYes, the etrailer Classic Base Plate Kit # e98959 fits your 2014 Chevy Suburban. This doesn't have the removeable arms so you just have the covers to deal with which means less steps to take. I'll go ahead and make a list of parts that I recommend using to flat tow your Suburban. The initial installation might take a bit longer for some of these but after that you will have a really easy on/off setup. etrailer Classic Base Plate Kit - # e98959 Roadmaster Nighthawk All Terrain - # RM-676 Adapter...
view full answer... - Recommended Parts to Flat Tow 2020 Chevy Traverse Behind a MotorhomeWe can absolutely get you set up with all the parts you need in order to flat tow your 2020 Chevy Traverse. You will need base plates, a tow bar, wiring kit, and supplemental braking system, and the best parts that will fit are the following: - Base Plate Kit: Roadmaster Direct-Connect Base Plate Kit # RM-523200-5 - Tow Bar: Roadmaster BlackHawk 2 All Terrain, Non-Binding Tow Bar # RM-422 - Safety Chains: Roadmaster 80" Coiled Safety Cables # RM-653 - Wiring Kit: Roadmaster 4-Diode Universal...
view full answer...
- Parts Needed to Flat Tow 2017 Ford F-350 Super DutyWe can get your 2017 Ford F-350 set up to be flat towed, and you'll need base plates, a tow bar, safety chains, wiring, and a supplemental braking system. I'll go ahead and list out the parts you need: - Base Plate Kit: Roadmaster Direct-Connect Base Plate Kit # RM-524452-5 - Tow Bar: Roadmaster BlackHawk 2 All Terrain, Non-Binding Tow Bar # RM-422 - Safety Cables: Roadmaster 80" Coiled Safety Cables # RM-653 - Wiring Kit: Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles -...
view full answer... - Do Blue Ox Base Plates Fit 2021 Chevy Spark ACTIV & Parts Needed to Flat TowI checked with Blue Ox, and the Blue Ox Base Plate Kit # BX1725 will fit your 2021 Chevy Spark ACTIV with a manual transmission. I have added cut out for you from the linked installation instructions from these base plates which shows the base plates on this vehicle. Along with the tow bar you asked about, there are a number of other parts needed to flat tow your 2021 Chevy Spark ACTIV with manual transmission, so I'll make a list for you to make it easier. - Base Plate Kit: Blue Ox Base...
view full answer...
- 2019 Ford F-150 Flat Tow Parts Recommendation with Blue Ox Avail Tow BarI'm happy to help you get your 2019 Ford F-150 ready to flat tow! The Stay-IN-Play DUO braking system is another excellent choice and by going that route you won't need the Stop Light Switch Kit # RM89ZR but you will still need the Relay Kit # RM-88400 to keep the brake light signal on your F-150 from overriding the turn signal from the RV when you're applying the brakes during a turn. With the parts listed out here is the bare minimum that you need: etrailer Invisible Base Plate Kit -...
view full answer... - Parts Needed to Flat Tow 2016 Mini Cooper w/ Manual Transmission & All-Wheel DriveSo long as you have the manual transmission on your 2016 Mini Cooper, flat towing is possible with either front-wheel or all-wheel drive. There are a number of parts you will need in order to flat tow your Mini, which I'll list out for you: - Base Plate Kit: Blue Ox Base Plate Kit # BX1312 - Tow Bar: Curt Rambler Steel Tow Bar for Curt and Blue Ox Base Plates # C26FR - Wiring Kit: Roadmaster Universal Hy-Power Diode Wiring Kit # RM-154 - Supplemental Braking System: Demco SBS Stay-IN-Play...
view full answer... - Easiest to Install Base Plates For 2017 Ford F-150 For Flat TowingThe two are indeed the same (just switching part numbers), and the simplest base plate installation for your 2017 Ford F-150 are absolutely these: - etrailer Invisible Base Plate Kit # e86YR The reason the # e86YR base plates are the easiest install on your '17 F-150 is because they do not require the removal of your truck's bumper, which other base plates do. They will install right where your tow hooks are, bolting on and replacing the hooks on your truck. But for a DIY install, these...
view full answer... - All Parts Needed to Flat Tow 2022 Ford Escape HybridWe can get your 2022 Ford Escape Hybrid set up with everything you need for flat towing, and it's definitely a smart idea to get everything at once. I verified these fits with the manufacturer, and to make it easy, I'll go ahead and list out all the parts you need for your '22 Escape Hybrid: - Base Plate Kit: Roadmaster Direct-Connect Base Plate Kit # RM39FR - Tow Bar: Roadmaster Falcon All Terrain, Non-Binding Tow Bar # RM-522 - Safety Chains: Roadmaster 80" Coiled Safety Cables # RM-653 -...
view full answer... - Flat Tow Set Up For 2017 GMC Sierra 1500I suggest these for your flat tow set up. The etrailer Invisible Base Plate Kit - Removable Arms # e98958. This gives you the base connection that makes the entire set up work. Next the Blue Ox Avail Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 10,000 lbs # BX7420 will couple with the base plate and your motorhome. Safety cables are included with this tow bar. For your braking system I recommend the Demco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor...
view full answer... - 2022 Ford F-150 Recommended Parts for Flat TowingFor a complete flat towing setup on your 2022 Ford F-150 you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, possibly a high-low adapter, and some other wiring parts. Here is what I recommend using: Direct-Connect Base Plate Kit - # RM38VR Nighthawk All Terrain Tow Bar w/ LED Lights - # RM-676 Towing Combo Kit - # RM-9284-2 Charge Line Kit - # RM-156-25 Brake Like Relay - # RM-88400 Brake Kit - Part # DM86VR for hydraulic or part...
view full answer... - Is A Tow Bar Braking System Required To Flat Tow A 2020 Jeep WranglerAll states, besides Missouri, have varying weight requirements for braking systems. If you could provide the state you're planning on towing through I can find that specific state's requirement or you can check with your local DOT. That being said I HIGHLY recommend using a braking system to ensure the safety of you and your motorhome and towed vehicle. The Demco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor # DM86VR is a great choice for your 2020 Jeep Wrangler...
view full answer... - Best Parts to Flat Tow 2021 Subaru Crosstrek With Manual TransmissionAccording to the owner's manual I looked up, there are no restrictions regarding flat towing your 2021 Subaru Crosstrek with manual transmission. All you will need are the right parts in order to flat tow your Crosstrek, and I'll list out the best ones below to make it easier for you to order. - Base Plate Kit: Roadmaster Direct-Connect Base Plate Kit # RM-52927-5 - Tow Bar: Roadmaster Falcon All Terrain, Non-Binding Tow Bar # RM-522 - Safety Chains: Roadmaster 80" Coiled Safety Cables...
view full answer... - Recommended Flat Towing Equipment For A 2020 Ford Escape Plug-In HybridTo flat tow your 2020 Ford Escape Plug-In Hybrid you'll need a tow bar, base plate, tow bar wiring kit, braking system, and safety cables. For this I have the following recommendations: Tow Bar: etrailer SD Non-Binding Tow Bar for Roadmaster Direct-Connect Base Plates # e74ZR. This tow bar features non-binding latches and telescoping, self supporting arms that make connecting and disconnecting your Escape on any terrain a breeze. It has an adjustable head that tilts up or down 3" and the...
view full answer... - Base Plate For 2015 Jeep Wrangler Unlimited w/ Factory or Off-Road Bumper & Falcon 522 Tow BarYou can definitely flat tow your 2015 Jeep Wrangler Unlimited with the tow bar you have, the Roadmaster Falcon All Terrain, Non-Binding Tow Bar # RM-522, though with the standard factory bumper a base plate is needed. It is not made to be connected to the D-rings or flat towed with. However, if you want to add an off-road bumper with D-rings you can do so and use the adapter. I'll go ahead and list out the options for you: - Standard Factory Bumper: Roadmaster Direct-Connect Base Plate...
view full answer... - Difference Between Roadmaster Direct-Connect & Crossbar-Style Base Plates on 2021 Ford F-150The difference between the Direct-Connect # RM38VR and Crossbar-Style # RM58VR that fit your 2021 Ford F-150 is the type of tow bar that they accept, and the ease of connection. The direct-connect base plates allows you to simply connect your tow bar right to the base plate, eliminating the need for a middle man - the crossbar - so it is definitely the route I recommend: - Roadmaster Direct-Connect Base Plate Kit # RM38VR Along with the base plates, there are a number of other things...
view full answer... - Parts Needed To Flat Tow a 2023 Ford Escape Hybrid and Choosing Where To Have Everything InstalledWe have a link to find installers in your area on our product pages. On the Roadmaster Direct-Connect Base Plate Kit # RM77GR page you can find the link "Locate installers near me" just below the product images which will allow you to see the installers in your are by entering your zip code. I do recommend checking their reviews and contacting to discuss the parts you are looking to install as every installer is different and can have different rates. Here is a list of the other parts I...
view full answer...
Do you have a question about this Tow Bar Braking System?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Video by:
Andrew K
Video by:
Jonathan Y
Video by:
Thomas T
Video by:
Ethan H
Video by:
Samuel H
Edited by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
John S
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Jacob H
Test Fit:
Ryan G
Test Fit:
Clayton O
Test Fit:
Bradley B
Test Fit:
John A
Written by:
Kristina F
Updated by:
Mike S
Updated by:
Noah M
Updated by:
Eric H
Updated by:
Emily H
Updated by:
Amanda K
Installed by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Deborah
4/21/2024
The braking system is awesome. Just flip the toggle switch to tow, and back for regular driving. Easy!