Demco 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Adapter Cord

See what our Experts say about this Demco Tow Bar Wiring

• Best Flt Tow Wiring Kit for a 2023 Ford F-150 Hybrid with LED Lights
  Since your 2023 Ford F-150 has the LED lights I highly recommend the Roadmaster Smart Diode 7-Wire to 6-Wire Wiring Kit # RM38FR which has better diodes to make it compatible with the LED lights. The Demco Kit # DM9523010-54 has some really basic diodes which is why I recommend the Roadmaster over this. Demco doesn't list out fitment with LED lights but Roadmaster has a few diode kits and they say this newer one needs to be used for your truck. You'll also need the Charge Line Kit # RM-156-25...
  view full answer...
• Using Demco Aluminator Tow Bar With Roadmaster EZ Base Plates on 2008 Toyota Yaris
  Your Demco Aluminator tow bar is compatible with the Roadmaster EZ Base Plate Kit # 521181-1 that fits your 2008 Toyota Yaris, you will simply need an adapter, the Roadmaster Tow Bar Adapter # RM-032. As for the other parts needed to flat tow your 2008 Toyota Yaris with a Demco Aluminator tow bar, here is a list of everything you will need, and I'll include the base plates and adapter. - Base Plate Kit: Roadmaster EZ Base Plate Kit # 521181-1 - Roadmaster Tow Bar Adapter # RM-032 - Safety...
  view full answer...
• Tow Bar and Flat Tow Parts Needed for Heavy 2020 Ram 3500
  We can definitely get you a flat tow set up for your 2020 Ram 3500. These trucks are heavy, but the GVWR you are referring to is the gross weight, which is the max weight it can be when loaded with passengers and cargo. According to my research, a 2020 Ram 3500 has a curb weight (unloaded) of up to just over 7,500 lbs max. So even if you have some cargo in the truck, it is difficult to imagine you will be exceeding the 10,500 lb tow bar option you can use with a 2 inch hitch on your motorhome,...
  view full answer...
  
• How To Prevent Battery Drain on 2008 Jeep Liberty While Flat-Towed
  In regards to flat-towing a 2008 Jeep Liberty, the battery must be disconnected to prevent drain per the owner's manual. In order to do this, I recommend using the Roadmaster Battery Disconnect part # RM-766 since it allows for this to be done with the flick of a switch, no tools needed and you can do it from inside the cab. Please note, there are specific steps you'll need to follow for setting up the vehicle to be flat-towed, you can find these starting on page 378 of the owner's manual....
  view full answer...
• Correct Tow Bar Wiring For 2022 Jeep Gladiator With LED Lights & ParkSense
  So a couple things here, as by blind spot indicators I believe you are referring to the ParkSense feature on your 2022 Jeep Gladiator. If so, you would not be able to use the Demco # DM9523010-54. The issue is that the brake and running lights will all be the same brightness with standard diodes. To avoid this, you'll need a Smart Diode kit from Roadmaster: - Roadmaster Smart Diode 7-Wire to 6-Wire Wiring Kit for Variable Voltage LED Tail Lights # RM63MR The diodes in this kit convert...
  view full answer...
• Can 2010 Jeep Grand Cherokee 4WD Quadra–Trac II be Flat Towed and Parts Needed
  I took a look at the online owner's manual for your 2010 Jeep Grand Cherokee, and under the "Recreational Towing" section your Quadra–Trac II model CAN be flat towed because it has a neutral transfer case, which is exactly what you described. If you go to page 340 (of the online manual, yours may be different) it explains exactly how to transfer into neutral, which you will do before towing. Since you mentioned Demco, here are all the parts you will need from Demco to flat tow your 2010...
  view full answer...
• 2018 Chevrolet Equinox Flat Tow Wiring Needs
  The Demco 4-Diode Universal Towed Vehicle Wiring Kit w/ 7-Wire to 6-Wire Coiled Connector # DM9523010-54 is going to allow you to run your vehicles existing 4 pole harness to the front to connect to your RV's tail, brake, and turn signal lights to your towed vehicle's lighting system. If you already have the wiring you need the Mighty Cord Trailer Connector Adapter - 4-Way Flat to 6-Way Round # A10-6034VP and the Hopkins Heavy-Duty, Coiled Trailer Connector Adapter - 7-Way to 6-Pole Round...
  view full answer...
• Comparing Base Plate Kits for a 2019 Ford Expedition
  The best base plate kit for a 2019 Ford Expedition is the Demco Tabless Base Plate Kit part # DM9519318 because it does not have any sort of cross tube that attaches the two side together unlike the Roadmaster Direct-Connect Base Plate Kit part # RM-524457-5 or Blue Ox Base Plate Kit part # BX2678. The lack of a cross tube is going to limit the amount of modifications that are needed which then reduces install time as well so this is really the best route to take. Furthermore, the Demco...
  view full answer...
• How To Install Tow Bar Wiring On Vehicle With Separate Brake Signal And Turn Signals
  When installing tow bar wiring on a vehicle with separate brake and turn signals that will be flat towed you would want to use a diode kit like the Demco 4-Diode Universal Towed Vehicle Wiring Kit w/ 7-Wire to 6-Wire Coiled Connector # DM9523010-54. When installed it will make your brake lights flash as the turn signals instead of your actual amber turn signals when being flat towed. If you wanted to keep the separate wiring for flat towing you would need the Vehicle to Vehicle Tail Light...
  view full answer...
• Recommended Tow Dolly For A 2010 Ford Ranger
  The online manual for a 2010 Ford Ranger doesn't list anything about dolly towing the vehicle but does state that manual transmissions can be placed in 2WD and flat towed, so you're more than likely fine to dolly tow your Ranger, but I recommend double-checking with your local Ford dealership to ensure there isn't anything else that would prevent you from doing so. If you haven't purchased your tow dolly yet then I recommend the Demco Kar Kaddy X Tow Dolly w/ Disc Brakes # DM9713093....
  view full answer...
• Difference Between Blue Ox and Demco Wiring Kit for Flat Towing 2019 Jeep Wrangler
  There is really only one difference between the Demco 4-Diode Universal Towed Vehicle Wiring Kit with 7-Wire to 6-Wire Coiled Connector # DM9523010-54 and the Blue Ox Tow Bar Wiring Kit # BX8848, which is that the Demco comes with the 7-Wire to 6-Wire cord as well as a vehicle-side 6-way while the Blue Ox kit requires those be purchased separately. So if you were to go with the Blue Ox Tow Bar Wiring Kit # BX8848 you would also need the Blue Ox 7-Wire to 6-Wire, Coiled Electrical Cord...
  view full answer...
• Tow Bar Lighting Kit That Fits 2018 Ford Edge
  The Hopkins Tow Bar Lighting Kit part # HM56011 is a confirmed fit for the Sport and Titanium models of your 2018 Ford Edge but not the other models. If you have one of the other models you'd need a diode kit like the part # DM9523010-54. For your tow vehicle that does not have air brakes the DUO part # SM99251 that you mentioned would be a great option. Our installers prefer this system to all of the other permanent install options because of how well it works and how much easier it...
  view full answer...
• Flat Towing Wiring For A 2017 Kia Soul
  My recommendation is to use a 4-diode universal towed vehicle wiring kit like # DM9523010-54. What this does is easily allows you to connect your RV's tail, brake, and turn signal lights to your towed vehicle's lighting system wires towed car as a combined lighting system so that brake and turn signals travel along the same wire. This kit also includes a 6 way to 7 way coiled cord that will connect to your motorhome and your Kia Soul as well as, all the necessary hardware to install. You...
  view full answer...
• Flat Tow Parts for 2021 Jeep Wrangler Using etrailer Invisible Base Plate Kit
  The etrailer Invisible Base Plate Kit with Removable Arms, # e98948 does not include safety chains. This is a custom-fit base plate that provides the needed attachment points for your tow bar. With this option, the tabs remain on tow bar arms and easily secure to base plate receivers with a quick turn. It is a simple, bolt-on installation with included hardware. For a complete flat tow kit for your 2021 Jeep Wrangler, you will also need the tow bar, safety chains, a wiring solution for...
  view full answer...
• Is the Demco 4-Diode Universal Towed Vehicle Wiring Kit Offered Without 7 to 6-Way Cord
  Yes, the Demco 4-Diode Universal Towed Vehicle Wiring Kit w/ 7-Wire to 6-Wire Coiled Connector part # DM9523010-54 is available without the umbilical cord using the Demco 4-Diode Universal Towed Vehicle Wiring Kit part # DM9523010. If you need the 6-pole as well you can get this with part # PK11609.
  view full answer...
• Recommended Flat Towing Components For A 2024 Chevy Trax
  Hi John, Yes, we do have everything you'll need to flat tow your 2024 Chevy Trax. Baseplate: Blue Ox Base Plate Kit # BLU24UR. Tow Bar: etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates # e47ZR. This tow bar comes with safety cables included and has an adjustable head to help keep the tow bar level between the motorhome and Trax. Tow Bar Wiring Kit: Demco 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Adapter Cord # DM9523010-54. This diode kit will transfer...
  view full answer...
• Parts Needed to Flat Tow 2021 Ram 1500 Classic Warlock
  We do indeed have the parts needed for you to flat tow your 2021 Ram 1500 Classic Warlock, which I'll go ahead and list out for you: - Base Plate Kit: Blue Ox Base Plate Kit # BLU74FR - Tow Bar: Blue Ox Avail Non-Binding Tow Bar # BX7420 - Wiring Kit: Demco 4-Diode Universal Towed Vehicle Wiring Kit # DM9523010-54 - Supplemental Braking System: Demco SBS Stay-IN-Play DUO Supplemental Braking System # DM86VR I verified with Blue Ox for you that the base plates do fit your 2021 Ram 1500...
  view full answer...
• Recommended Flat Towing Equipment For A 2021 Jeep Wrangler Sahara 4XE
  If you went with the etrailer Invisible Base Plate Kit - Removable Arms Item # e98948 you would need to also get an adapter so I recommend the Roadmaster Direct-Connect Base Plate Kit - Removable Arms Item # RM-521453-5 instead. The Blue Ox Patriot Portable Braking System - Proportional Item # BLU37TR will work with your Jeep and I recommend installing the 12 Volt Outlet Kit, 20 amps Item # RM-9332 to have a dedicated 12v outlet to power it. The Demco 4-Diode Universal Towed Vehicle...
  view full answer...
• All Parts Needed to Flat Tow 2011 Jeep Wrangler With Standard Bumper
  We can get you set up with all the parts needed to flat tow your 2011 Jeep Wrangler with a standard factory bumper. There are a number of parts you'll need so I'll go ahead and list them out for you to make it easy to order: - Base Plate Kit: Demco Tabless Base Plate Kit # DM9519292 - Tow Bar: etrailer SD Non-Binding Tow Bar # e34ZR - Wiring Kit: Demco 4-Diode Universal Towed Vehicle Wiring Kit # DM9523010-54 - Roadmaster Automatic Battery Disconnect # RM-766 - Supplemental Braking...
  view full answer...
• Can a 2016 Ford Explorer 4WD With V6 Be Flat-Towed
  Yes, a 2016 Ford Explorer (4WD) can be flat-towed with all four wheels down so long as it has the 3.5L V6 or 3.5L EcoBoost V6 Engine. That said, there are no modification needed for this unless a specific flat-tow part you are looking at requires this. I have attached some parts for you below as well that you will need. Demco Tabless Base Plate Kit part # DM9519329 (Clean Look) Demco Dominator Non-Binding Tow Bar part # DM9511008 (Easiest To Use) Demco 4-Diode Universal Towed Vehicle Wiring...
  view full answer...
• Parts Needed to Flat Tow a 2021 Jeep Cherokee
  For your 2021 Jeep Cherokee you will at minimum need base plates, a tow bar, safety cables, a wiring solution to display your indicator lights from the RV to the Jeep, and a braking solution/supplemental braking for the Jeep. I recommend the Demco Tabless Base Plate Kit, # DM9519307 that will match perfectly with the Demco Dominator Non-Binding Tow Bar, # DM9511008 you have been looking at. This also includes the needed safety cables. For the wiring, I suggest the Demco 4-Diode Universal...
  view full answer...
• Does Flat Towing 2016 Ram 1500 Require Brake Light Relay With Demco 7-Wire to 6-Wire Connector
  Your 2016 Ram 1500 will not require a brake light relay, the RV turn signals will not override the brake light when you are using the Demco 4-Diode Universal Towed Vehicle Wiring Kit with 7-Wire to 6-Wire Coiled Connector # DM9523010-54.
  view full answer...
• Demco Base Plate And Tow Bars For Flat Towing a 2021 Chevrolet Tahoe
  The Demco Tabless Base Plate Kit # DM9519342 is the base plate that will fit your 2021 Chevrolet Tahoe. I recommend using the Demco Excali-Bar III Non-Binding Tow Bar # DM9511013 to connect your Tahoe to the tow vehicle. You will need the Demco 4-Diode Universal Towed Vehicle Wiring Kit # DM9523010-54 to allow your Tahoe tail lights to function so that you do not have to use magnetic lights that tend to easily get damaged. A Roadmaster Automatic Battery Disconnect # RM-766 will allow...
  view full answer...
• Base Plates & Wiring For 2024 Chevy Trax For Flat Towig
  Hi Yves, We do have base plates, wiring, and the other parts needed to dinghy tow your 2024 Chevy Trax, and I'll go ahead and list out all the parts for you to make it easy to order. - Base Plate Kit: Demco Tabless Base Plate Kit # DM59YV - Tow Bar: Demco Commander II Non-Binding Tow Bar # DM9511012 - Wiring Kit: Demco 4-Diode Universal Wiring Kit for Towed Vehicles # DM9523010-54 - Supplemental Braking System Motorhome with HYDRAULIC Brakes: Demco Stay-IN-Play Duo Flat Tow Brake...
  view full answer...

Do you have a question about this Tow Bar Wiring?