Demco 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Adapter Cord
Item # DM9523010-54
Our Price: $206.39
Confirmed to Fit
2014 Jeep Cherokee
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (55)
- Q & A (0)
- Photos
2014 Jeep Cherokee - Demco 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Adapter Cord
- Diode Kit
- Splices into Vehicle Wiring
- Tail Light Mount
- Universal
- Demco
This complete kit includes everything you need to correctly display your RV's brake and turn signals on your Chevrolet Express Van tail lights. Includes coiled 7-way to 6-way cable and 6-way car-side socket.
Features:
- Diodes display your RV's brake and turn signasl lights to your towed Jeep Cherokee's lighting system
- Wires towed car as a combined lighting system so that brake and turn signals travel along the same wire
- Prevents feedback that can damage your Jeep Cherokee's electrical components
- Resists corrosion with heat-sealed casing
- 7-Wire to 6-wire adapter cable lets you easily run power from your motorhome to your towed Jeep Cherokee
- Coiled to prevent dragging and tangling
- Resistant to water, oil, and chemicals, with vinyl coating and silicone-injected plugs to prevent corrosion
- 6-Way socket hardwires to towed car and mounts on the front bumper
- Kit includes:
- 4 Diodes
- 4-Wire harness
- 7-Way to 6-way adapter cord
- 6-Way socket
- Wire connectors
- Cable ties
- 1 Ring terminal
- Made in the USA
Specs:
- Wiring harness length: 26'
- Wire gauge: 16
- Adapter cord extended length: 7'
- 1-Year warranty
Separate vs. Combined Lighting Systems
This kit will display on your towed car as a combined lighting system - also known as a 2-wire system. A combined lighting system uses the same light bulb to signal both braking and turning (in other words, the car signals a turn by flashing the brake light, while a separate/3-wire system light up independently of each other. Add a wiring converter (118158 - sold separately) and 2 additional diodes to get a separate lighting system.
Do I Need a Brake Light Relay?
Because your Jeep Cherokee has a combined lighting system - wherein the brake signals and the turn signals are carried on a single wire - a brake light relay (RM-88400 - sold separately) may be required if you use a supplemental braking system with your towing setup. A supplemental braking system depresses the brake pedal in your towed car every time you apply the brakes in your RV. So, if your towed car's brake lights illuminate when the brake pedal is pressed and the engine is off - as is the case when towing - then you need to install a relay to ensure that the lights on your towed car always act in accordance with the signals sent by your RV via the wiring harness. Without a relay, the brake signal from your towed car will override the turn signal sent by your RV when you slow down to make turns, creating a potential hazard.
9523010 Demco Tail Light Wiring Kit
9523054 Demco Trailer Connector Adapter - 7-Way to 6-Way - 7' Cord
Installation Details
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Received too many
Customer Reviews
Demco 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Adapter Cord - DM9523010-54
Average Customer Rating: 4.8 out of 5 stars (55 Customer Reviews)
This complete kit includes everything you need to correctly display your RV's brake and turn signals on your vehicle tail lights. Includes coiled 7-way to 6-way cable and 6-way car-side socket.by: Nicholas07/11/2023
etrailer was extremely helpful in getting me parts to flat tow our 2023 Jeep Wagoneer. More specifically, Noah took the time to research the required parts, offer technical guidance, and follow up to ensure I was taken care of. Top notch service which was much appreciated.
by: Paul 03/20/2023
2023 Jeep Wrangler Unlimited
Needed new wiring and diodes for my 2023 Jeep Rubicon. ETrailer makes it so easy to set up all the wiring for flat towing.
by: Louis02/28/2022
Jeep Wrangler
This kit was fairly easy to install on a 2021 Jeep Wrangler. If you use this kit to set up a Roadmaster Nighthawk tow bar you do not need the 7-wire to 6-wire coil connector as the tow bar comes with it. Get a 4 diode wire kit without the coil connector and save money.
by: Todd 11/17/2021
Works great, to charge battery of toad you need to change the 12v power from center to match the towed vehicle or wire up towed car to center post 12v
by: John 10/19/2022
Took time to do the wiring, but once done it works great!
by: James 07/17/2020
EASY install and quick service
by: Tom 08/14/2022
2017 Cadillac Escalade
Great products and quick delivery.
by: John09/29/2021
JeepCherokee
The salesman was very helpful picking the correct setup for my Cherokee, easy to install, looks and works great
by: Harry02/17/2022
Harry
2/19/2023
Great
by: Joseph 11/09/2021
Works as advertised , however I feel the braking is more abrupt than gradual ..
by: Gerald 01/11/2022
Works great 1 year and still working pe rfectly
by: Customer F01/18/2022
Works great, no issues
by: Jeffrey02/20/2022
Good quality.
by: Meg 08/24/2021
Exactly what I needed
by: Robert 05/10/2021
Work out excellent
by: Tom09/08/2021
The parts came quickly and they were exactly as described
by: Albert02/02/2024
by: Ken 06/22/2023
by: Bill06/26/2020
excellent service
by: James 04/17/2024
by: Mark 03/25/2024
by: David 07/11/2021
Very fast service!
by: Gary11/18/2023
by: Rob 04/25/2024
2020 Jeep Gladiator
by: Ronald 09/23/2022
25
55
Show More Reviews
See what our Experts say about this Demco Tow Bar Wiring
- Demco Base Plate And Tow Bars For Flat Towing a 2021 Chevrolet TahoeThe Demco Tabless Base Plate Kit # DM9519342 is the base plate that will fit your 2021 Chevrolet Tahoe. I recommend using the Demco Excali-Bar III Non-Binding Tow Bar # DM9511013 to connect your Tahoe to the tow vehicle. You will need the Demco 4-Diode Universal Towed Vehicle Wiring Kit # DM9523010-54 to allow your Tahoe tail lights to function so that you do not have to use magnetic lights that tend to easily get damaged. A Roadmaster Automatic Battery Disconnect # RM-766 will allow...
view full answer... - Flat Towing Wiring For A 2017 Kia SoulMy recommendation is to use a 4-diode universal towed vehicle wiring kit like # DM9523010-54. What this does is easily allows you to connect your RV's tail, brake, and turn signal lights to your towed vehicle's lighting system wires towed car as a combined lighting system so that brake and turn signals travel along the same wire. This kit also includes a 6 way to 7 way coiled cord that will connect to your motorhome and your Kia Soul as well as, all the necessary hardware to install. You...
view full answer... - Best Base Plate For 2021 Jeep Cherokee Trailhawk We can definitely help you out with the best base plate for your 2021 Jeep Cherokee Trailhawk. The best option, due to the fact it will give your Cherokee the cleanest look when you aren't flat towing and is a bolt-on installation that doesn't require any drilling, is the following: - etrailer Invisible Base Plate Kit # e98951 This will fit your '21 Cherokee Trailhawk and give you a start to your flat towing set up. Along with the tow bar you'll also need other parts, including a compatible...
view full answer... - Complete Flat Towing Setup for a 2015 Kia SoulI would be happy to help you find those parts so you can flat tow your 2015 Kia Soul. For a manual transmission you will need a baseplate, tow bar with safety chains, supplemental braking system, wiring harness, and a battery charge line. I have attached numerous installation videos to help guide you through installing these parts. Tow Bar: For a tow bar, I recommend the Blue Ox Alpha Tow Bar item # BX7380 which comes with the safety cables you need. You should also add the Blue Ox Base-Plate...
view full answer... - Does Direct Connect Base Plate Kit for 2021 Chevy Equinox Require CrossbarIf you went with the Direct Connect Roadmaster base plate kit for your 2021 Chevy Equinox with part # RM-523193-5 you would not need the crossbar that you are missing so this would be the easiest solution. The temporary install braking kits like the Blue Ox Patriot part # BLU37TR will install and work great without issue. For lighting the diode kit part # DM9523010-54 is a great choice that comes with everything needed to splice into your taillights.
view full answer... - Roadmaster Crossbar-Style Vs. Direct-Connect Base Plate Kits for 2021 Jeep Wrangler UnlimitedThe biggest difference between the Roadmaster Crossbar-Style Base Plate Kit # RM-521453-4 and the Roadmaster Direct-Connect Base Plate Kit # RM-521453-5 for your 2021 Jeep Wrangler Unlimited is going to be the style of tow bar that you can use. The Crossbar-Style Base Plate Kit # RM-521453-4 will allow you to use a tow bar like the etrailer SD Non-Binding Tow Bar for Roadmaster Crossbar-Style Base Plates # e44ZR. The Direct-Connect Base Plate Kit # RM-521453-5 will allow you to use a tow...
view full answer... - Using Demco Aluminator Tow Bar With Roadmaster EZ Base Plates on 2008 Toyota YarisYour Demco Aluminator tow bar is compatible with the Roadmaster EZ Base Plate Kit # 521181-1 that fits your 2008 Toyota Yaris, you will simply need an adapter, the Roadmaster Tow Bar Adapter # RM-032. As for the other parts needed to flat tow your 2008 Toyota Yaris with a Demco Aluminator tow bar, here is a list of everything you will need, and I'll include the base plates and adapter. - Base Plate Kit: Roadmaster EZ Base Plate Kit # 521181-1 - Roadmaster Tow Bar Adapter # RM-032 - Safety...
view full answer... - Best Way To Flat Tow A 2021 Jeep Wrangler UnlimitedI suggest getting the etrailer Invisible Base Plate Kit # e98948 for your 2021 Jeep Wrangler Unlimited. This comes with everything you need to get it installed. To get your Jeep ready for the flat tow, I suggest getting the Blue Ox Altha 2 Tow Bar # BX7380, a portable braking system # BLU37TR and wiring # DM9523010-54 to complete your setup.
view full answer... - Which Tow Bar is Compatible with Roadmaster EZ-5 Base Plates for 2020 Jeep Wrangler Unlimited The Roadmaster part you've referenced with part number 521450-5 is no longer available, but it was an EZ-5 base plate so I recommend using the Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar w/ LED Lights - RV Mount - 8K # RM-676, which comes with safety cables integrated into the setup. This would be compatible with the discontinued 521450-5 base plate you've mentioned or the current model, which is the Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM-521453-5. If...
view full answer... - Recommended Flat Towing Set Up for a 2024 Buick Encore GX Yes, it will. The Roadmaster Battery Disconnect with Switch for Towed Vehicle w/ Flat Tow Brake System item # RM-766 is not only compatible with your 2024 Buick Encore GX but it is recommended to be used by Roadmaster. This a great part that makes disconnecting and reconnecting your battery extremely simple. Here are some other parts you will need to flat tow your 2024 Buick Encore GX: Tow Bar and Safety Chains - Blue Ox Alpha 2 Non-Binding Tow Bar 2" Hitch - 6,500 lbs item # BX7380 Base...
view full answer... - Does Flat Towing 2016 Ram 1500 Require Brake Light Relay With Demco 7-Wire to 6-Wire ConnectorYour 2016 Ram 1500 will not require a brake light relay, the RV turn signals will not override the brake light when you are using the Demco 4-Diode Universal Towed Vehicle Wiring Kit with 7-Wire to 6-Wire Coiled Connector # DM9523010-54.
view full answer... - Recommended Flat Towing Components For A 2024 Chevy Trax Hi John, Yes, we do have everything you'll need to flat tow your 2024 Chevy Trax. Baseplate: Blue Ox Base Plate Kit # BLU24UR. Tow Bar: etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates # e47ZR. This tow bar comes with safety cables included and has an adjustable head to help keep the tow bar level between the motorhome and Trax. Tow Bar Wiring Kit: Demco 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Adapter Cord # DM9523010-54. This diode kit will transfer...
view full answer... - Recommended Flat Towing Wiring Harness for a 2023 Ford F-150 w/ LED Lights No, it will not. Since your 2023 Ford F-150 has LED tail lights you will need the Roadmaster Smart Diode 7-Wire to 6-Wire Wiring Kit for Variable Voltage LED Tail Lights item # RM38FR. The issue is that the brake and running lights will all be the same brightness with the standard diodes included in the Demco item # DM9523010-54. The diodes in the Roadmaster item # RM38FR kit convert the 12V signal from your RV's wiring to a 9V signal which allows the differentiating brightness needed between...
view full answer... - Recommended Tow Dolly For A 2010 Ford Ranger The online manual for a 2010 Ford Ranger doesn't list anything about dolly towing the vehicle but does state that manual transmissions can be placed in 2WD and flat towed, so you're more than likely fine to dolly tow your Ranger, but I recommend double-checking with your local Ford dealership to ensure there isn't anything else that would prevent you from doing so. If you haven't purchased your tow dolly yet then I recommend the Demco Kar Kaddy X Tow Dolly w/ Disc Brakes # DM9713093....
view full answer... - Is the Demco 4-Diode Universal Towed Vehicle Wiring Kit Offered Without 7 to 6-Way CordYes, the Demco 4-Diode Universal Towed Vehicle Wiring Kit w/ 7-Wire to 6-Wire Coiled Connector part # DM9523010-54 is available without the umbilical cord using the Demco 4-Diode Universal Towed Vehicle Wiring Kit part # DM9523010. If you need the 6-pole as well you can get this with part # PK11609.
view full answer... - Demco Universal Towed Vehicle Wiring Kit for 2021 Jeep WranglerI would be happy to help make a wiring recommendation for your 2021 Jeep Wrangler. I recommend the Demco 4-Diode Universal Towed Vehicle Wiring Kit w/ 7-Wire to 6-Wire Coiled Connector item # DM9523010-54. This complete wiring kit lets you connect your RV's tail, brake, and turn signal lights to your towed vehicle's lighting system. The diodes prevent electrical feedback and the damage it can cause to your car's electrical components.
view full answer... - Does 2020 Buick Envision Need Brake Light Relay and Which is Easier Blue Ox or Roadmaster SetupDoes our Allegro have trailer wiring already present at the rear of the vehicle? Like with a 7-way connector? If so the circuits are already combined regardless of what you see on the vehicle taillights. If you plan to use a diode kit or bulb and socket tow bar lighting solution you will need a brake light relay like # RM-88400 when using the brake system you mentioned so that the brake lights won't override the blinkers. It's a toss up on which is easier to use between the Roadmaster...
view full answer... - Parts Needed to Flat Tow 2021 Ram 1500 Classic WarlockWe do indeed have the parts needed for you to flat tow your 2021 Ram 1500 Classic Warlock, which I'll go ahead and list out for you: - Base Plate Kit: Blue Ox Base Plate Kit # BLU74FR - Tow Bar: Blue Ox Avail Non-Binding Tow Bar # BX7420 - Wiring Kit: Demco 4-Diode Universal Towed Vehicle Wiring Kit # DM9523010-54 - Supplemental Braking System: Demco SBS Stay-IN-Play DUO Supplemental Braking System # DM86VR I verified with Blue Ox for you that the base plates do fit your 2021 Ram 1500...
view full answer... - Difference Between Blue Ox and Demco Wiring Kit for Flat Towing 2019 Jeep WranglerThere is really only one difference between the Demco 4-Diode Universal Towed Vehicle Wiring Kit with 7-Wire to 6-Wire Coiled Connector # DM9523010-54 and the Blue Ox Tow Bar Wiring Kit # BX8848, which is that the Demco comes with the 7-Wire to 6-Wire cord as well as a vehicle-side 6-way while the Blue Ox kit requires those be purchased separately. So if you were to go with the Blue Ox Tow Bar Wiring Kit # BX8848 you would also need the Blue Ox 7-Wire to 6-Wire, Coiled Electrical Cord...
view full answer... - Parts Needed to Flat-Tow a 2002 Jeep LibertyIn order to flat-tow a 2002 Jeep Liberty you'll need a few different items such as a base plate kit, tow bar, safety cables, lighting harness, and supplemental braking system. I have attached a list with each of these parts for you below. etrailer Classic Base Plate Kit part # e98970 etrailer XHD Non-Binding Tow Bar part # e94ZR Demco 4-Diode Universal Towed Vehicle Wiring Kit part # DM9523010-54 Brake Buddy Select 3 Portable Supplemental Braking System part # HM39524 This is a complete...
view full answer... - How To Install Tow Bar Wiring On Vehicle With Separate Brake Signal And Turn Signals When installing tow bar wiring on a vehicle with separate brake and turn signals that will be flat towed you would want to use a diode kit like the Demco 4-Diode Universal Towed Vehicle Wiring Kit w/ 7-Wire to 6-Wire Coiled Connector # DM9523010-54. When installed it will make your brake lights flash as the turn signals instead of your actual amber turn signals when being flat towed. If you wanted to keep the separate wiring for flat towing you would need the Vehicle to Vehicle Tail Light...
view full answer... - Tow Bar and Flat Tow Parts Needed for Heavy 2020 Ram 3500We can definitely get you a flat tow set up for your 2020 Ram 3500. These trucks are heavy, but the GVWR you are referring to is the gross weight, which is the max weight it can be when loaded with passengers and cargo. According to my research, a 2020 Ram 3500 has a curb weight (unloaded) of up to just over 7,500 lbs max. So even if you have some cargo in the truck, it is difficult to imagine you will be exceeding the 10,500 lb tow bar option you can use with a 2 inch hitch on your motorhome,...
view full answer...
- Troubleshooting A Non-Working Light Function With Diode WiringSince the diodes in the Demco 4-Diode Universal Towed Vehicle Wiring Kit w/ 7-Wire to 6-Wire Coiled Connector # DM9523010-54 use spade terminal connectors the easiest way to test the diode would be to swap the connections on the diode in question and test your light functions to see if the terminal on the diode is the issue. If it randomly stopped working then the cause is typically just a loose connection or a bad ground so I would check the connections and make sure there's no damage...
view full answer... - Replacement Demco Coiled 7-Way To 6-Way Diode Wiring Kit Cable If you're just wanting the 7-wire to 6-wire cable from the Demco 4-Diode Universal Towed Vehicle Wiring Kit w/ 7-Wire to 6-Wire Coiled Connector # DM9523010-54 then you'll want part # DM9523054. This will also include another 6-way socket, which you can hang onto as a backup if you ever have an issue with your current one.
view full answer...
Do you have a question about this Tow Bar Wiring?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Jonathan Y
Updated by:
Wilson B
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
Ryan G
Test Fit:
Clayton O
Test Fit:
Bradley B
Written by:
Kristina F
Video by:
Jacob H
Video by:
Aidan B
Video by:
John S
Video by:
Thomas T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
James
7/17/2021
Works great we use it at least monthly to pull our Jeep gladiator behind the RV no issues at all