etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
Item # e44KR
Retail:$269.78
Our Price: $200.94
You Save: $68.84
Confirmed to Fit
1991 Chevrolet S-10 Pickup
with Factory Step Bumper
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (13)
- Q & A (0)
- Photos
1991 Chevrolet S-10 Pickup - etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Class III
- 2 Inch Hitch
- Visible Cross Tube
- etrailer
- 6000 lbs WD GTW
- 600 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your Chevrolet S-10 Pickup's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer
- Matte black powder coat finish over protective base coat offers superior rust resistance
- Stylish, round-tube design
- Ball mount, pin and clip sold separately
- Made in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 4,000 lbs
- Maximum GTW when used with weight distribution: 6,000 lbs
- Maximum tongue weight: 400 lbs
- Maximum TW when used with weight distribution: 600 lbs
- Maximum gross trailer weight: 4,000 lbs
- Limited lifetime warranty
Rugged, Matte Black Finish
The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.
etrailer Technical Support
At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
e44KR etrailer Class 3 Trailer Hitch Receiver - 2" - Matte Black Carbide
Installation Details
Tech Tip
No drilling required for installation , Requires temporary removal of bumper/fascia during installation ,
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
Customer Reviews
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" - e44KR
Average Customer Rating: 4.9 out of 5 stars (13 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.by: Joe 01/04/2023
1991 Chevrolet Tahoe
I have a 91 S10 Tahoe. It takes a little persuasion from a mallet, but the hitch bolted up perfectly. Seems to be very strong. I've only used it once, but it worked great pulling a trailer load!
by: Andres 08/11/2023
2003 GMC Sonoma
Great hitch, easy installation, excellent craftsmanship
by: Robert 07/29/2023
Been using etrailer for years and would not go elsewhere. Great company with expert help.
by: Justin02/27/2023
Chevrolet
price great quality great install easy with help from a buddy fit like it was supposed to good hardware included. installed on a 1995 chevy s10 with factory step bumper. you could do it yourself but having an extra set of hands makes it a ton easier. 45 minutes to 1 hour install time with help.
by: David03/27/2023
Hitch fits well, bolts supplied were oversized for the existing factor holes, so reused orginial factory bolts.
by: Isaiah09/15/2023
2000 GMC Sonoma
Good solid piece..easy in stall
by: Steve 11/16/2022
received in record time fits well . was waiting till it was installed
It looks like I will need an extension please send me cost
thank you
steve mantz
by: Steven S03/03/2023
1997 ChevroletS-10 Pickup
love it. good price compared to other brands. shipping was fast. fits great. easy to install . thank you !!!
by: Cameron 02/24/2023
2002 ChevroletS-10 Pickup
Fit perfectly. Easy to install
by: Blake 10/27/2022
good service
by: Josh 01/23/2024
2003 ChevroletS-10 Pickup
by: Joe 04/12/2023
by: Chad 03/08/2023
2008 Dodge Ram Pickup
by: Dennis05/09/2024
This is a very well made product, it is nicely powder coated and shiny, looks like it will last for many years! It's heavier than I expected which is a plus, they certainly made it extremely strong, I highly recommend etrailer hitches!
by: SunnySDCA2003S1011/07/2020
Looks great, nearly hidden and very low-profile. Went on easily, installed myself in about 45 minutes. I used a milk crate on a small furniture dolly to move the bumper out of the way and hold it up so I could align the hitch and bumper bracket holes and bolt them up. Did I say PERFECT fit, first try! Thanks again, eTrailer !! Now this one-owner, low mileage pickup's 4.3L Vortec and 4L60-E can be used as intended--to haul some serious trailer weight (truck is rated to tow 5900 lb. with weight distribution). The new hitch will also serve as a bike carrier platform when not pulling trailers around.
by: Jeffrey01/15/2021
I recently purchased a Curt hitch for my GMC Sonoma through etrailer. Got it in 2 days in perfect condition and installed it with ease the 3rd day. Could not be happier with my purchase.
by: Kurt02/19/2018
Followed directions included.Everything went together correctly.Fits good looks good.Thank you for an excellent shopping experience from website to delivery to follow up on product!
by: Austin05/10/2018
Now I can haul my four wheeler on a trailer. Hitch went on no problem with a little help from my grandfather. Comparing hitch videos really helped a lot. Quick turnaround,Good price thanks a lot etrailer.
by: Bob C10/08/2016
Outstanding fit is great you really cannot tell where the bumper stops and the hitch begins. I am very satisfied with the whole process Thank you
by: Rodney04/29/2020
Hitch went on with no problems. All holes lined up correctly and it cane with new hardware. I'm pleased with the product
by: Joseph05/29/2021
installation was easy and fast. This is a great product and highly recommended this brand.
by: Stephen07/03/2018
Watched install instructions on YouTube. Easy, took just a short time & done. Thanks
by: Peter05/02/2020
Perfect fit! It took only about an hour to put the hitch on. Very easy installation.
by: 02/13/2022
My truck is 1999 Chevy S-10 Long bed. This may apply to other S-10 pickups.
You don't have to drill the hitch. You do have to drill the frame and bumper brackets. The supplied bolts are 1/2 inch grade 8 bolts. The original bolts holding on the bumper are 12mm. The 1/2 inch bolts will not go through the original bumper and frame holes without drilling them out to 1/2 inch. If the description has said this, my review would have been a 5 star review.
I took them at their word and went to a public garage to install the hitch (it was a cold and I don't have a garage). When the bolts did not fit, I had to put my truck back together and go home for a drill. Then go back to the garage to complete the installation.
Other than the minor glitch above, the install was painless and looks great.
by: John 05/12/2020
Very sturdy. Took me a lot longer than 45 min to install but pretty simple. Mine was about 1/8 inch short but would slide in with some persuasion and the snug fit made the alignment easy. I have had the square Draw Tight hitches before and I much prefer the look of this tubular design.
25
89
Show More Reviews
See what our Experts say about this etrailer Trailer Hitch
- etrailer Trailer Hitch Fitment on a 1995 Chevy S-10 for Light Duty Trailer TowingYes, the etrailer Trailer Hitch Receiver # e44KR fits your 1995 Chevy S-10 and is rated to tow up to 4,000 lbs with a 400 lb tongue weight. I really like this hitch because of the matte black finish that not only looks more rugged but is also more durable than the classic glossy black finish against road debris. The next thing you need for your towing setup you also need the Curt T-Connector Wiring # C55312 and mounting brackets # 18144 and # C57202. This gives you a way to place the wiring...
view full answer...
Info for this part was:
Edited by:
Lindsey S
Written by:
Justice A
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Joe
1/7/2024
I have used the hitch for a year, pulling several large trailer loads and its still great. Theres no rust and its as strong as the day I put it on. Its much stronger than the bumper hitch of the truck and I dont worry about pulling the bumper off while pulling tree roots out anymore ??