Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

See what our Experts say about this CURT Trailer Hitch

• Will Curt 13932 Class III Hitch Work on 2001 Chevy Silverado with Body Lift
  The hitch will work on a truck that's equipped with a body lift, but the receiver probably won't line up with the license plate well in your roll pan because the space between the frame and truck body has increased. Where the receiver will sit in relation to the roll pan will depend on how much height the lift adds. I've provided a photo showing where the receiver tube would typically sit on a vehicle without a body lift.
  view full answer...
  
• Trailer Hitch Fits for 2006 Chevrolet Silverado Classic Z71
  The 2006 model year Chevy trucks were a split model year (C/K Series and Silverado). To select the correct Curt Class IV hitch for your truck you can use the linked page to choose your Vehicle Style. Use the drop-down menu tool to choose your specific configuration. For the standard 1500 use Curt # C14332. For the 1500 with 10-inch deep-drop bumper use Curt # 13339 (Class III). If the 1500 has an aftermarket Roll Pan Bumper use # 13932 (also Class III). If you have a different version...
  view full answer...
• Recommended Trailer Hitch for 2003 Chevy Silverado 1500 That Installs Behind License Plate
  The only trailer hitch we offer for a 2003 Chevrolet Silverado 1500 which installs behind the license plate is the Curt Trailer Hitch Receiver part # 13932 which is designed specifically for models with an aftermarket roll pan bumper. If you have a standard rear bumper then your only option is one that mounts underneath, the Curt Trailer Hitch Receiver part # 13322.
  view full answer...
• Trailer Hitch Fit for 2004 Chevy Silverado 1500 4x4
  I checked with Reese and they have no hitch part 36069 showing on their website. I did find it elsewhere on the web but it is discontinued/out of stock. I checked with my contacts at Reese and was able to find out that this item fit various Chevy, Dodge and Ford vehicles from the late 70s through the late 90s. It does not fit any truck after model year 1999. If you intend to re-install this hitch on a compatible vehicle please note you will need a new hardware kit # RHK. Hitch hardware...
  view full answer...
• Does Curt Hitch # 13932 for 2003 Chevy Silverado 1500HD Allow you Keep Rear Mounted Spare
  You do not have to permanently remove your spare to install the Curt hitch # 13932 on your 2003 Chevy Silverado. You'd be able to install it while retaining your rear spare.
  view full answer...
• Dimensions of Curt Trailer Hitch Receiver 13932
  The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13932 measures 40-3/4" wide at the widest point. The distance across between each set of bolt holes is 38-3/4".
  view full answer...
• Trailer Hitch and Wiring Recommendations for a 2002 Chevy Silverado 1500HD
  If your 2002 Chevy Silverado 1500 has a roll pan bumper (which is basically the absence of a bumper) then yes, Curt trailer hitch # 13932, will fit. If your truck has the regular step bumper then you can use Curt trailer hitch # 13332 instead. I also recommend etrailer ball mount kit # EBMK4. It comes with a ball mount with a 2-3/4 inch rise or 4 inch drop, interchangeable ball set, hitch pin with clip, and a storage bag. If the ball mount kit does not have the right rise or drop to tow...
  view full answer...
• Towing Capacity of 2004 Chevy Silverado LS with 5.3L Engine
  The listed towing capacity of your 2004 Chevy Silverado LS short bed with 5.3L engine is going to vary depending on some specifics of the vehicle. If the Silverado is four-wheel drive and has a 3.73:1 axle ratio, the capacity is 7,800 lbs (extended cab) or 8,200 lbs (regular cab); if it is four-wheel drive and has a 4.10:1 axle ratio the towing capacity is 8,800 lbs (extended cab) or 9,200 lbs (regular cab). If your Chevy is two-wheel drive and has a 3.42:1 axle ratio, the towing capacity...
  view full answer...
• Trailer Hitch Recommendation for Lowered 2001 Chevy Silverado 1500
  If you have the stock bumper then the hitches made to fit the stock bumper would work well for you. For that we have the etrailer.com hitch part # e98849 as a confirmed fit. This won't fit behind the license plate though. The roll pan bumper hitches like the part # 13932 might work for this since that's how they install but we can't guarantee they'll work with the factory bumper.
  view full answer...
• Recommended Hitch for a 2002 GMC Sierra 2500HD
  I have a hitch for your 2002 GMC Sierra 2500HD but the item # 13932 only fits the 1500 models. Instead you will want the Curt Trailer Hitch Receiver item # 14211. This hitch is custom fit and bolts to your GMC with included hardware. It fits the 6-1/2' and 8' bed models with or without the rear hitch. The Curt Trailer Hitch Receiver item # 14211 is a class IV hitch, with a 2" receiver, and it weighs 60 lbs. It has a 10,000 lbs towing capacity, and a 1,000 lbs maximum tongue weight. This...
  view full answer...
• Does Curt Hitch 13932 Fit 2003 Chevy Silverado with Roll Pan Bumper
  Yes the Curt hitch part # 13932 that you referenced does fit your 2003 Chevy Silverado as long as it has a roll pan bumper.
  view full answer...
• Trailer Hitch Receiver Fit For 2003 Chevy Silverado 1500 HD
  We don't specify between the 1500 and 1500 HD in terms of fit in our guide, but I did check with our manufacturers for you to verify the fits for a trailer hitch receiver on your 2003 Chevy Silverado 1500 HD. The correct fit is going to depend on your bumper, so you'll want to keep that in mind. I'll go ahead and list out the options for you, and each hitch has a 2" receiver: - Standard Bumper: Curt Trailer Hitch Receiver - Class III - 6,000 lbs Towing/600 lbs Tongue Weight # 13322 -...
  view full answer...
• Options for a Hitch Receiver on a 2006 Sierra With a Roll Pan Bumper
  The Curt # 14211 hitch will essentially be a direct replacement and may require trimming to install with a roll pan bumper. We do have the Curt # 13932, which is designed to fit a 1500 with a roll pan bumper, however. Unfortunately, it does not look like there are currently any options available for a 2500 or 3500 Sierra.
  view full answer...
• Bumper Needed for a 2003 Chevrolet Silverado 1500 SS
  The # e98849 is designed to fit the 2003 Chevrolet Silverado 1500. If you have an aftermarket roll pan bumper on your SS then you will need to go with # 13932.
  view full answer...
• Hitch Receiver for 2001 Chevy Silverado with Roll Pan Bumper That Does Not Use License Plate Hole
  You are correct. For the 2001 Chevy Silverado 1500, the Curt # 13932 is the only available hitch that can be used with the roll pan bumper. If you wanted to use one of the hitches designed to circumvent the deep drop bumpers that were often found on this model you could use the Curt # 13339. However, this is still a Class III hitch receiver, so it would not increase your towing capacity and there is not anything for use with an aftermarket roll pan bumper that is higher rated than that....
  view full answer...
  
• Availability of Class IV and Class V Trailer Hitches for a 2003 GMC Sierra 1500
  There are a few different options to choose from depending on the style of 2003 GMC Sierra 1500 HD that you have. If you have a 10 inch Deep Drop Bumper I recommend the Curt # 13339. If you have the aftermarket Roll Pan Bumper I recommend the Curt # 13932. If you have a factory bumper then I recommend the Curt # C15323. The first 2 options are have 2 inch receiver openings but only have Class III ratings and are the only options for those styles of Sierra 1500 HDs. The 3rd option is...
  view full answer...
• Hitch Recommendation for a 2003 Chevy Silverado 1500 with Roll Pan Bumper
  The best recommendation I can make for you is a Class III hitch like the Curt # 13932 which is designed to fit your vehicle that has an aftermarket roll pan bumper. There are no Class V hitches designed to work with your setup currently but this hitch would work well. This hitch has the capacities of: Maximum gross trailer weight: 5,000 lb Maximum GTW when used with weight distribution: 8,000 lbs Maximum tongue weight: 500 lb Maximum TW when used with weight distribution: 800 lbs I...
  view full answer...
• Adjustable Hitch Receiver for a 2021 Taxa Overland Cricket Trailer
  I have a solution for your 2021 Taxa Overland Cricket Trailer but The Curt Trailer Hitch Receiver item # 13932 is a custom fit hitch receiver for 1999-2007 GM fullsize trucks. That receiver will probably not fit on your trailer. I recommend the Curt Adjustable Trailer Hitch Receiver item # C13701. This hitch receiver will adjust up to 51" wide so it will definitely accomodate your 46 1/2 inch frame. This is a class III 2" hitch receiver and has a 500 lbs tongue weight for your bikes and...
  view full answer...
• Casita Heritage Trailer Hitch Solution
  For campers like your Casita Heritage the best hitch option we have is the part # 13703 which is a multi fit hitch that fits a wide frame width range and all popular trailer frame styles.
  view full answer...
• Recommended Trailer Hitch for a 2007 Chevy Silverado
  When I looked up the online version of the owner's manual for your 2007 Chevy Silverado 1500 Crew Cab it looked like the least rated option was still 6,700 lbs and that is if you have the 3.23 axle ratio. If you look at the online owner's manual (can be found a variety of ways) then you can pin point your weight rating. It could be that the trailer hitch included with your tow package it only rated for 5,000 lbs towing/500 lb tongue weight but that is something you can find on the trailer...
  view full answer...
• Recommended Trailer Hitch For 1999 GMC Sierra 1500
  I was not able to find a hitch with the numbers you referenced online or in our system, but we do have trailer hitches that are designed to work with your Sierra. The trailer hitches we offer depend on the bumper you have on your Sierra. This is so you have the clearance for the receiver tube. If you have a standard bumper on your Sierra, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver, part # 75362. This is a class lll hitch and it has a 2 inch receiver opening. If you have...
  view full answer...
• Trailer Hitch for 2001 Chevy Silverado 2500 HD With Roll Pan Bumper
  The only roll pan bumper-compatible receiver hitch we offer for a 2001 Chevy Silverado is a Class III, part # 13932. A fold down license plate holder would be a handy accessory. I've linked to an install video for the # 13932 hitch.
  view full answer...
• Will Curt 13932 Trailer Hitch Receiver Fit 2007 GMC Sierra Classic 2500
  The Curt Trailer Hitch Receiver # 13932 is a confirmed fit for the 2007 GMC Sierra Classic 1500 with aftermarket Roll Pan Bumper. This will not fit your 2007 GMC Sierra Classic 2500. For a Class III hitch like this one that is confirmed to fir a 2007 GMC Sierra Classic 2500HD I recommend the Curt Trailer Hitch Receiver # C13108. This will fit a 6-1/2' bed. If you have an 8' bed, I recommend the Draw-Tite # 41944. Both have a concealed cross tube and a bolt on installation. Each of these...
  view full answer...
• What is Weight Rating and Hitch Class of Curt # 13932
  The Curt hitch part # 13932 is a Class III hitch that has the towing capacity of 5,000 lb and 500 lb tongue weight. While this isn't on the higher end of the Class III hitch spectrum it is high enough to be a Class III hitch. These hitches are rated independently of the vehicle which is why they often times don't match the vehicle's capacities exactly.
  view full answer...

Do you have a question about this Trailer Hitch?