2010 Ford F-350, 450, and 550 Cab and Chassis Vehicle Cargo Control

Hi Kev; the MORryde RV Cargo Sliding Tray with the 80% extension is only available at 72" long x 48 " wide #MR52FR. If you're alright with a 60% extension we have the MORryde RV Cargo Sliding Tray - 60" x 48" #MR85FR.

Hey Paul, I spoke with Curt and they stated that the Replacement Trunnion Spring Bar for Curt TruTrack Weight Distribution System #C17535 would only be compatible with the #C17499. The Curt TruTrack 4P Trailer Mounted Weight Distribution System w/…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Tim, the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs #F2709 will indeed fit your 2024 GMC 2500 AT4X with a factory suspension lift. You will likely need to use a spacer kit to compensate for the lift, depending on the amount of…

Hi Steve; assuming you have the factory plastic or steel bumper you can use the Roadmaster Direct-Connect Base Plate Kit - Removable Arms #RM-521453-5. This is going to be compatible with your Roadmaster Sterling Tow Bar #RM-576. You will also need…

I sure do and yes they are! The holes are spaced 1-1/4" apart on center for both the BulletProof Hitches Weight Distribution Shank item #BPH85RR and the Blue Ox SwayPro Weight Distribution System item #BXW2000 so they are indeed compatible.

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hey Dave, we have a version that does fit your tire size with the part #TC3231CAM but the specific size you mentioned would not work.

I spoke with my contact at Lippert and she said that you cannot cut the fabric for the Solera Awnings. This is because the polycords inside the fabric will indeed come apart if you were to make a cut. When choosing the correct replacement fabric size…

Your 2024 Chevrolet Silverado 3500 will come with a 2-1/2" trailer hitch receiver. If your truck did not come with a reducer for a 2" receiver we do have the B&W #BWRHXA2182 if you need to use your 2" ball mount or hitch mounted…

Hi Bryan, Yakima BaseLine towers unfortunately don't have a compatible landing pad to connect to the channel of a RetraxPro tonneau cover. You'll need to Skyline Towers #Y53TR and Landing Pad 1 #Y00221 in order to attach your Yakima…