Dimensions of Fulton Spare Tire Carrier # FETC0101  

I have a solution for you but you're going to need to weld on a pipe mount. There are no jacks available that will clamp onto your frame and give you that much of a lift. The clamps won't support that much extension. For that high of…

I checked with Fulton and the Spare Tire Carrier item #FETC0101 that you are looking at has an inner length of 9-1/8" and an inner width of 3-5/8". Depending on the width of your wheel you should not have an issues mounting this to…

Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a…

For your Blizzard 10T Snowmobile trailer, the 2,200 lb GVWR with the Dexter torsion axle means we do not have a direct replacement. We do however have a better option that will work for you whether you have 78 or 79 inch hub face to hub face…

Assuming you have a 4-bolt or 5-bolt bolt pattern on your 12" rims the Fulton Spare Tire Carrier #FETC0101 will fit. This is designed to fit 8", 9", 12", 13", 14", or 15" wheels with 4 or…

You will first want to check the fuses on your tow vehicle. Some vehicles could have fuses for operating the turn signals and brake lights of a towing package. You will want to check if they are installed and working properly. The next thing is to…

Two adjacent bolt holes on a 5 on 4-1/2 inch bolt pattern would be 2-5/8 apart, center to center while 2-11/32 would be just a bit further apart. Do you have the hub handy? Go ahead and check your measurement using the wheel studs on the hubs which…

I may have an option for you, but there is not a spare tire carrier of the same design as the MaxxTow Spare Tire Carrier for 3" x 5" Trailer Frames - 4-Lug and 5-Lug Wheels #MT70214 you were looking at that will fit a spare wheel and tire…

Yes, you can use the Counteract Tire Balancing Beads for Tandem Axle Trailers - 4 Tires #CA83VR with any Tire Pressure Monitoring System, TPMS. The beads will not hinder any readings or cause damage to your devices.

You found what you are looking for then because the lug nut size is indeed 13/16" for the Fulton Spare Tire Carrier #FETC0101.

In order to pick out a spare tire for your utility trailer with 13 inch wheels you will need a couple more key pieces of information. You will need to know the bolt pattern of the 13 inch wheels and you will need to know the trailer tire's size.…

We do not offer trailer-mount spare tire carriers with a narrower u-bolt than the CE Smith Spare Tire Carrier for Trailers, part #CE22007Z-11050-2, which has a u-bolt that is 3-1/16-inch wide. However, this part will still work on your 1-1/2-inch…