bing tracking image
Q & A Icon

What Disc Brakes Do You Recommend For 2003 521 Ranger With A Tandem Axle  

Question:

What if I keep using my current rotors, bearing. Can I order the Disc Brake Caliper assemble with brake pads and the mounting flange/bracket? If so which one do you recommend?

1

Helpful Expert Reply:

I will answer you second question first. The difference between the three Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2" is the rotor finish. The differences are as follows:

part # K2HR35D, has a Dacromet coated hub-rotor
part # K2HR35DS, has a Dacomet and stainless steel coated hub-rotor
part # K2HR35DDKG, has a Dacromet and KodaGuard coated hub-rotor.

The brake kit with the Dacromet and KodaGuard will have the best corrosion resistance between the three. With regard to what brake is better between the Kodiak Disc Brake Kit. part # K2HR35DKG, With regard to which brake assembly kit is better, I think the Kodiak with the Dacromet and KodaGuard will resist rust and corrosion better.

I have included product description links and video demo links below.

expert reply by:
1
Mark Smith

Tony L.

12/1/2021

I have 2003 521 Ranger trailer with a straight spindle with 10 rotors and UPC-DB 42 brake assembly with oil bath hubs. Wanting upgrade whole assembly to Kodiak Trailer Brakes - K2HR35DS Kit. Need Kodiak Oil Bath Hubs part number. Need seals and bearing part numbers that work with oil bath hubs?

Mark S.

12/1/2021

Unfortunately, we do not have anything that will fit. We have the bearings, but they do not fit any hubs that we carry in that combination. We also have hubs that use those bearings, but not one hub that uses those two together.

Tony L.

12/15/2021

What if I keep using my current rotors, bearing. Can I order the Disc Brake Caliper assemble with brake pads and the mounting flange/bracket? If so which one do you recommend?

Mark S.

12/15/2021

Brake rotors and calipers are usually brand specific, so while I do have a solution for you, it will most likely require your to install new rotors because of compatibility issues and a new spindle. My recommendation is the Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs, part # K2HR35D. I have included product description links, a video installation link, and a video review link below.

Products Referenced in This Question






Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>